Height control in GMA-AM using external wire as controlling variable

References

• Sarathchandra, D. T.; Davidson, M. J.; Visvanathan, G. Parameters Effect on SS304 Beads Deposited by Wire Arc Additive Manufacturing. Mater. Manuf. Process. 2020, 35(7), 852–858. DOI: 10.1080/10426914.2020.1743852.
   Web of Science ®Google Scholar
• Panchagnula, J. S.; Simhambhatla, S. Manufacture of Complex Thin-Walled Metallic Objects Using Weld-Deposition Based Additive Manufacturing. Robot. Comput. Integr. Manuf. 2018, 49, 194–203. DOI: 10.1016/j.rcim.2017.06.003.
   Web of Science ®Google Scholar
• Liu, G.; Xiong, J. External Filler Wire Based GMA-AM Process of 2219 Aluminum Alloy. Mater. Manuf. Process. 2020, 35(11), 1268–1277. DOI: 10.1080/10426914.2020.1779936.
   Web of Science ®Google Scholar
• Lu, X.; Li, M. V.; Yang, H. Comparison of Wire-Arc and Powder-Laser Additive Manufacturing for IN718 Superalloy: Unified Consideration for Selecting Process Parameters Based on Volumetric Energy Density. Int. J. Adv. Manuf. Technol. 2021, 114(5–6), 1517–1531. DOI: 10.1007/s00170-021-06990-y.
   Google Scholar
• Gomez Ortega, A.; Corona Galvan, L.; Deschaux-Beaume, F.; Mezrag, B.; Rouquette, S. Effect of Process Parameters on the Quality of Aluminium Alloy Al5si Deposits in Wire and Arc Additive Manufacturing Using a Cold Metal Transfer Process. Sci. Technol. Weld. Join. 2018, 23(4), 316–332. DOI: 10.1080/13621718.2017.1388995.
   Web of Science ®Google Scholar
• Wu, W.; Xue, J.; Zhang, Z.; Yao, P. Comparative Study of 316L Depositions by Two Welding Current Processes. Mater. Manuf. Process. 2019, 34(13), 1502–1508. DOI: 10.1080/10426914.2019.1643473.
   Web of Science ®Google Scholar
• Rajesh Kannan, A.; Mohan Kumar, S.; Pramod, R.; Pravin Kumar, N.; Siva Shanmugam, N.; Palguna, Y. Microstructure and Mechanical Properties of Wire Arc Additive Manufactured Bi-Metallic Structure. Sci. Technol. Weld. Join. 2020, 26(1), 47–57. DOI: 10.1080/13621718.2020.1833140.
   Google Scholar
• Hu, Z.; Qin, X.; Shao, T.; Liu, H. Understanding and Overcoming of Abnormity at Start and End of the Weld Bead in Additive Manufacturing with GMAW. Int. J. Adv. Manuf. Technol. 2018, 95(5–8), 2357–2368. DOI: 10.1007/s00170-017-1392-9.
   Web of Science ®Google Scholar
• Radel, S.; Diourte, A.; Soulié, F.; Company, O.; Bordreuil, C. Skeleton Arc Additive Manufacturing with Closed Loop Control. Addit. Manuf. 2019, 26, 106–116. DOI: 10.1016/j.addma.2019.01.003.
   Google Scholar
• Xiong, J.; Zhang, G. Adaptive Control of Deposited Height in GMAW-Based Layer Additive Manufacturing. J. Mater. Process. Technol. 2014, 214(4), 962–968. DOI: 10.1016/j.jmatprotec.2013.11.014.
   Web of Science ®Google Scholar
• Ma, C.; Li, C.; Yan, Y.; Liu, Y.; Wu, X.; Li, D.; Han, Y.; Jin, H.; Zhang, F. Investigation of the in-Situ Gas Cooling of Carbon Steel During Wire and Arc Additive Manufacturing. J. Manuf. Process. 2021, 67, 461–477. DOI: 10.1016/j.jmapro.2021.05.022.
   Google Scholar
• Ma, G.; Zhao, G.; Li, Z.; Yang, M.; Xiao, W. Optimization Strategies for Robotic Additive and Subtractive Manufacturing of Large and High Thin-Walled Aluminum Structures. Int. J. Adv. Manuf. Technol. 2019, 101(5–8), 1275–1292. DOI: 10.1007/s00170-018-3009-3.
   Google Scholar
• Scotti, F. M.; Teixeira, F. R.; Silva, L. J. D.; de Araújo, D. B.; Reis, R. P.; Scotti, A. Thermal Management in WAAM Through the CMT Advanced Process and an Active Cooling Technique. J. Manuf. Process. 2020, 57, 23–35. DOI: 10.1016/j.jmapro.2020.06.007.
   Web of Science ®Google Scholar
• Xie, Y.; Zhang, H.; Zhou, F. Improvement in Geometrical Accuracy and Mechanical Property for Arc-Based Additive Manufacturing Using Metamorphic Rolling Mechanism. J. Manuf. Sci. Eng. Trans. ASME. 2016, 138(11), 1–8. DOI: 10.1115/1.4032079.
   Web of Science ®Google Scholar
• Nikam, S. H.; Jain, N. K.; Sawant, M. S. Optimization of Parameters of Micro-Plasma Transferred Arc Additive Manufacturing Process Using Real Coded Genetic Algorithm. Int. J. Adv. Manuf. Technol. 2020, 106(3–4), 1239–1252. DOI: 10.1007/s00170-019-04658-2.
   Google Scholar
• Geng, H.; Li, J.; Xiong, J.; Lin, X. Optimisation of Interpass Temperature and Heat Input for Wire and Arc Additive Manufacturing 5A06 Aluminium Alloy. Sci. Technol. Weld. Join. 2017, 22(6), 472–483. DOI: 10.1080/13621718.2016.1259031.
   Web of Science ®Google Scholar
• Ríos, S.; Colegrove, P. A.; Williams, S. W. Metal Transfer Modes in Plasma Wire + arc Additive Manufacture. J. Mater. Process. Technol. 2019, 264, 45–54. DOI: 10.1016/j.jmatprotec.2018.08.043.
   Web of Science ®Google Scholar
• Yang, D.; Wang, G.; Zhang, G. Thermal Analysis for Single-Pass Multi-Layer GMAW Based Additive Manufacturing Using Infrared Thermography. J. Mater. Process. Technol. 2017, 244, 215–224. DOI: 10.1016/j.jmatprotec.2017.01.024.
   Web of Science ®Google Scholar
• Zhu, L.; Li, J.; Luo, Y.; Han, J.; Zhang, C.; Xu, J.; Chen, D. Characteristics of Metal Droplet Transfer in Wire-Arc Additive Manufacturing of Aluminum Alloy. Int. J. Adv. Manuf. Technol. 2018, 99(5–8), 1521–1530. DOI: 10.1007/s00170-018-2604-7.
   Google Scholar
• Font Comas, T.; Diao, C.; Ding, J.; Williams, S.; Zhao, Y. A Passive Imaging System for Geometry Measurement for the Plasma Arc Welding Process. IEEE Trans. Ind. Electron. 2017, 64(9), 7201–7209. DOI: 10.1109/TIE.2017.2686349.
   Google Scholar
• Wang, H.; Jiang, W.; Ouyang, J.; Kovacevic, R. Rapid Prototyping of 4043 Al-Alloy Parts by VP-GTAW. J. Mater. Process. Technol. 2004, 148(1), 93–102. DOI: 10.1016/j.jmatprotec.2004.01.058.
   Web of Science ®Google Scholar
• Bonaccorso, F.; Cantelli, L.; Muscato, G. An Arc Welding Robot Control for a Shaped Metal Deposition Plant: Modular Software Interface and Sensors. IEEE Trans. Ind. Electron. 2011, 58(8), 3126–3132. DOI: 10.1109/TIE.2011.2114311.
   Web of Science ®Google Scholar
• Doumanidis, C.; Kwak, Y. M. Multivariable Adaptive Control of the Bead Profile Geometry in Gas Metal Arc Welding with Thermal Scanning. Int. J. Press. Vessel. Pip. 2002, 79(4), 251–262. DOI: 10.1016/S0308-0161(02)00024-8.
   Google Scholar
• Xia, C.; Pan, Z.; Zhang, S.; Li, H.; Xu, Y.; Chen, S. Model-Free Adaptive Iterative Learning Control of Melt Pool Width in Wire Arc Additive Manufacturing. Int. J. Adv. Manuf. Technol. 2020, 110(7–8), 2131–2142. DOI: 10.1007/s00170-020-05998-0.
   Web of Science ®Google Scholar
• Xia, C.; Pan, Z.; Zhang, S.; Polden, J.; Wang, L.; Li, H.; Xu, Y.; Chen, S. Model Predictive Control of Layer Width in Wire Arc Additive Manufacturing. J. Manuf. Process. 2020, 58, 179–186. DOI: 10.1016/j.jmapro.2020.07.060.
   Web of Science ®Google Scholar
• Wang, Y.; Lu, J.; Zhao, Z.; Deng, W.; Han, J.; Bai, L.; Yang, X.; Yao, J. Active Disturbance Rejection Control of Layer Width in Wire Arc Additive Manufacturing Based on Deep Learning. J. Manuf. Process. 2021, 67, 364–375. DOI: 10.1016/j.jmapro.2021.05.005.
   Google Scholar
• Xiong, J.; Zhang, G.; Hu, J.; Wu, L. Bead Geometry Prediction for Robotic GMAW-Based Rapid Manufacturing Through a Neural Network and a Second-Order Regression Analysis. J. Intell. Manuf. 2014, 25(1), 157–163. DOI: 10.1007/s10845-012-0682-1.
   Web of Science ®Google Scholar
• Xiong, J.; Zhang, G.; Zhang, W. Forming Appearance Analysis in Multi-Layer Single-Pass GMAW-Based Additive Manufacturing. Int. J. Adv. Manuf. Technol. 2015, 80(9–12), 1767–1776. DOI: 10.1007/s00170-015-7112-4.
   Web of Science ®Google Scholar
• Xiong, J.; Zhang, G. Online Measurement of Bead Geometry in GMAW-Based Additive Manufacturing Using Passive Vision. Meas. Sci. Technol. 2013, 24(11), 115103. DOI: 10.1088/0957-0233/24/11/115103.
   Google Scholar
• Xiong, J.; Yin, Z.; Zhang, W. Forming Appearance Control of Arc Striking and Extinguishing Area in Multi-Layer Single-Pass GMAW-Based Additive Manufacturing. Int. J. Adv. Manuf. Technol. 2016, 87(1–4), 579–586. DOI: 10.1007/s00170-016-8543-2.
   Web of Science ®Google Scholar