Effectiveness of forced cooling during laser bending of duplex-2205

References

• Kim, S. K.; Kang, K. Y.; Kim, M. S.; Lee, J. M. Low-Temperature Mechanical Behavior of Super Duplex Stainless Steel with Sigma Precipitation. Met. (Basel). 2015, 5(3), 1732–1745. DOI: 10.3390/met5031732.
   Web of Science ®Google Scholar
• Ghosh, A.; Misra, D.; Acharyya, S. K. Experimental and Numerical Investigation on Laser Welding of 2205 Duplex Stainless Steel. Lasers in Manufacturing and Materials Processing. 2019, 6(3), 228–246. DOI: 10.1007/s40516-019-00090-2.
   Google Scholar
• Francis, R.; Byrne, G. Duplex Stainless Steels—alloys for the 21st Century. Met. (Basel). 2021, 11(5), 836. DOI: 10.3390/met11050836.
   Web of Science ®Google Scholar
• Tehovnik, F.; Žužek, B.; Burja, J. Hot Tensile Testing of SAF 2205 Duplex Stainless Steel. Mater. Tehnol. 2016, 50(6), 989–993. DOI: 10.17222/mit.2016.242.
   Web of Science ®Google Scholar
• Nomani, J.; Pramanik, A.; Hilditch, T.; Littlefair, G. Stagnation Zone During the Turning of Duplex SAF 2205 Stainless Steels Alloy. Mater. Manuf. Process. 2017, 32(13), 1486–1489. DOI: 10.1080/10426914.2017.1279289.
   Web of Science ®Google Scholar
• Goyal, D. K.; Yadav, R.; Kant, R. An Integrated Hybrid Methodology for Estimation of Absorptivity and Interface Temperature in Laser Transmission Welding. Int. J. Adv. Manuf. Technol. 2022, 121(5–6), 3771–3786. DOI: https://doi.org/10.1007/s00170-022-09536-y.
   Web of Science ®Google Scholar
• Lu, Z. L.; Zhang, A. F.; Tong, Z. Q.; Yang, X. H.; Li, D. C.; Lu, B. H. Fabricating the Steam Turbine Blade by Direct Laser Forming. Mater. Manuf. Process. 2011, 26(7), 879–885. DOI: 10.1080/10426914.2011.560225.
   Web of Science ®Google Scholar
• Kumar, A.; Goyal, D. K.; Kant, R.; Singh, H. Enhancing Corrosion Performance of Cold-Sprayed Titanium/Baghdadite (Ti/BAG) Bio-Composite Coatings via Laser Treatment. Coatings. 2022, 12(7), 1010. DOI: https://doi.org/10.3390/coatings12071010.
   Web of Science ®Google Scholar
• Jung, W.; Kim, H.; Voronov, A.; Park, S.; Ryu, J.; Jeong, S. H.; Roh, C. L. High-Precision Laser Glass Cutting for Future Display. J. Soc. Inf. Disp. 2022, 30(5), 462–470. DOI: https://doi.org/10.1002/jsid.1130.
   Web of Science ®Google Scholar
• Deswal, N.; Kant, R. Machinability Analysis During Laser Assisted Turning of Aluminium 3003 Alloy. Lasers Manuf. Mater. Process. 2022, 9(1), 56–71. DOI: 10.1007/s40516-022-00163-9.
   Google Scholar
• Yadav, R.; Goyal, D. K.; Kant, R. A Comprehensive Study on the Effect of Line Energy During Laser Bending of Duplex Stainless Steel. Opt. Laser Technol. 2022, 151, 108025. DOI: 10.1016/j.optlastec.2022.108025.
   Web of Science ®Google Scholar
• Fetene, B. N.; Dixit, U. S.; Liao, H. Laser Bending of Friction Stir Processed and Cement-Coated Sheets. Mater. Manuf. Process. 2017, 32(14), 1628–1634. DOI: 10.1080/10426914.2017.1279321.
   Web of Science ®Google Scholar
• Seyedkashi, S. M. H.; Cho, J. R.; Lee, S. H.; Moon, Y. H. Feasibility of Underwater Laser Forming of Laminated Metal Composites. Mater. Manuf. Process. 2018, 33(5), 546–551. DOI: 10.1080/10426914.2017.1376075.
   Web of Science ®Google Scholar
• Dixit, U. S.; Joshi, S. N.; Kant, R. Laser Forming Systems: A Review. Int. J. Mechatron. Manuf. Syst. 2015, 8(3/4), 160–205. DOI: 10.1504/IJMMS.2015.073077.
   Google Scholar
• Wang, X.; Liu, D.; Li, W.; Xu, L.; Dong, Y. Study of Laser Bending of a Preloaded Titanium Alloy Sheet. Manuf. Rev. 2014, 1(25), 1–6. DOI: https://doi.org/10.1051/mfreview/2015002.
   Google Scholar
• Kant, R.; Joshi, S. N. Numerical and Experimental Studies on the Laser Bending of Magnesium M1A Alloy. Lasers Eng. 2016, 35(1–4), 39–62.
   Web of Science ®Google Scholar
• Nath, U.; Yadav, V.; Purohit, R. Finite Element Analysis of AM30 Magnesium Alloy Sheet in the Laser Bending Process. Adv. Mater. Process. Technol. 2021, 1–13. DOI: 10.1080/2374068X.2021.1878699.
   Google Scholar
• Siqueira, R. H. M.; Carvalho, S. M.; Kam, I. K. L.; Riva, R.; Lima, M. S. F. Non-Contact Sheet Forming Using Lasers Applied to a High Strength Aluminum Alloy. J. Mater. Res. Technol. 2016, 5(3), 55. DOI: 10.1016/j.jmrt.2016.02.002.
   Google Scholar
• Lawrence, J.; Schmidt, M. J. J.; Li, L. The Forming of Mild Steel Plates with a 2.5 KW High Power Diode Laser. Int. J. Mach. Tools Manuf. 2001, 41(7), 967–977. DOI: 10.1016/S0890-6955(00)00117-6.
   Web of Science ®Google Scholar
• Nair, R.; Kant, R.; Yadav, R.; Gurung, H. Experimentally Validated Analytical Modelling of the Laser Bending of Low Carbon Steel Sheets. Lasers Eng. 2022, 53, 253–265.
   Web of Science ®Google Scholar
• Li, Z.; Wang, X. Numerical Simulation of Stainless Steel-Carbon Steel Laminated Plate Considering Interface in Pulsed Laser Bending. Mater. (Basel). 2019, 12(9), 1410. DOI: 10.3390/ma12091410.
   PubMed Web of Science ®Google Scholar
• Xu, W.; Zhang, L. C.; Wang, X. Laser Bending of Silicon Sheet: Absorption Factor and Mechanisms. J. Manuf. Sci. Eng. Trans. ASME. 2013, 135(6), 061005. DOI: 10.1115/1.4025579.
   Web of Science ®Google Scholar
• Lambiase, F.; Paoletti, A.; Di Ilio, A. Experimental Investigation of Parameters Effect on Laser Forming Productiveness. Key Eng. Mater. 2011, 473, 791–798. DOI: 10.4028/473.791.
   Google Scholar
• Cheng, J.; Yao, Y. L. Cooling Effects in Multiscan Laser Forming. J. Manuf. Process. 2001, 3(1), 60–72. DOI: 10.1016/S1526-6125(01)70034-5.
   Google Scholar
• Lambiase, F.; Di Ilio, A.; Paoletti, A. An Experimental Investigation on Passive Water Cooling in Laser Forming Process. Int. J. Adv. Manuf. Technol. 2013, 64(5–8), 829–840. DOI: 10.1007/s00170-012-4072-9.
   Web of Science ®Google Scholar
• Paramasivan, K.; Das, S.; Marimuthu, S.; Misra, D. Increment in Laser Bending Angle by Forced Bottom Cooling. Int. J. Adv. Manuf. Technol. 2018, 94(5–8), 2137–2147. DOI: 10.1007/s00170-017-1035-1.
   Web of Science ®Google Scholar
• Yadav, R.; Goyal, D. K.; Kant, R. Enhancing Process Competency by Forced Cooling in Laser Bending Process. J. Therm. Stress. 2022, 45(8), 617–629. DOI: 10.1080/01495739.2022.2103057.
   Web of Science ®Google Scholar
• TMR Stainless. Practical Guidelines for the Fabrication of Duplex Stainless Steels. 2014. (London, UK: International Molybdenum Association (IMOA)). Retrieved 11 11 2022 978-1-907470-09-7. https://www.imoa.info/download_files/stainless-steel/Duplex_Stainless_Steel_3rd_Edition.pdf
   Google Scholar
• Odermatt, A. E.; Ventzke, V.; Dorn, F.; Dinsé, R.; Merhof, P.; Kashaev, N. Effect of Laser Beam Welding on Microstructure, Tensile Strength and Fatigue Behaviour of Duplex Stainless Steel 2205. J. Manuf. Process. 2021, 72(October), 148–158. DOI: 10.1016/j.jmapro.2021.10.020.
   Google Scholar
• dos Santos, D. C.; Magnabosco, R. Kinetic Study to Predict Sigma Phase Formation in Duplex Stainless Steels. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 2016, 47(4), 1554–1565. DOI: 10.1007/s11661-016-3323-z.
   Google Scholar
• Petrovic, D. S.; Klancnik, G.; Medved, J. The Effect of Cooling Rate on the Solidification and Microstructure Evolution in Duplex Stainless Steel a DSC Study. 2012,(September). DOI: 10.1007/s10973-012-2370-y.
   Google Scholar
• Oh, Y. J.; Yang, W. J.; Lee, J. H.; Kim, D. H.; Yoo, W. D.; Lee, J. H. Effect of Cooling Rate on Microstructural and Mechanical Properties of SAF 2205 Duplex Stainless Steel. J. Korean Soc. Heat Treat. 2013, 26(1), 14–20. DOI: 10.12656/jksht.2013.26.1.14.
   Google Scholar