FSW of extruded and additively manufactured parts for automotive components

References

• Frieske, B.; Kloetzke, M.; Mauser, F. Trends in Vehicle Concept and Key Technology Development for Hybrid and Battery Electric Vehicles. World Electr. Veh. J. 2013, 6(1), 9–20. DOI: 10.3390/wevj6010009.
   Google Scholar
• Sun, X.; Li, Z.; Wang, X.; Li, C. Technology Development of Electric Vehicles: A Review. Energies. 2019, 13(1), 1–29. DOI: 10.3390/en13010090.
   Web of Science ®Google Scholar
• Selamat, N. F. M.; Baghdadi, A. H.; Sajuri, Z.; Kokabi, A. H. Friction Stir Welding of Similar and Dissimilar Aluminium Alloys for Automotive Applications. Int. J. Automot. Mech. Eng. 2016, 13(2), 3401–3412. DOI: 10.15282/ijame.13.2.2016.9.0281.
   Web of Science ®Google Scholar
• Smith, C. B.; Crusan, W.; Hootman, J. R.; Hinrichs, J. F.; Heideman, R. J.; Noruk, J. S. Friction Stir Welding in the Automotive Industry. TMS Annu. Meet. 2001, 2001(September), 175–185.
   Google Scholar
• Zwicker, M. F. R.; Moghadam, M.; Zhang, W.; Nielsen, C. V. Automotive Battery Pack Manufacturing – a Review of Battery to Tab Joining. J. Adv. Join. Process. 2020, 1(November 2019), 100017. DOI: 10.1016/j.jajp.2020.100017.
   Google Scholar
• Wan, L.; Huang, Y. Friction Stir Welding of Dissimilar Aluminum Alloys and Steels: A Review. Int. J. Adv. Manuf. Technol. 2018, 99(5–8), 1781–1811. DOI: 10.1007/s00170-018-2601-x.
   Web of Science ®Google Scholar
• Kim, Y. G.; Fujii, H.; Tsumura, T.; Komazaki, T.; Nakata, K. Three Defect Types in Friction Stir Welding of Aluminum Die Casting Alloy. Mater. Sci. Eng. A. 2006, 415(1–2), 250–254. DOI: 10.1016/j.msea.2005.09.072.
   Web of Science ®Google Scholar
• Hassanin, A. E.; Velotti, C.; Scherillo, F.; Astarita, A.; Squillace, A.; Carrino, L. Study of the Solid State Joining of Additive Manufactured Components. RTSI 2017 -IEEE 3rd Int. Forum Res. Technol. Soc. Ind. Conf. Proc. 2017, 14–17. DOI: 10.1109/RTSI.2017.8065967.
   Google Scholar
• Murr, L. E. A Review of FSW Research on Dissimilar Metal and Alloy Systems. J. Mater. Eng. Perform. 2010, 19(8), 1071–1089. DOI: 10.1007/s11665-010-9598-0.
   Web of Science ®Google Scholar
• Sen, M.; Shankar, S.; Chattopadhyaya, S. Investigations into FSW Joints of Dissimilar Aluminum Alloys. Mater. Today Proc. 2019, 27, 2455–2462. DOI: 10.1016/j.matpr.2019.09.218.
   Google Scholar
• Gebreamlak, G.; Palani, S.; Sirhabizu, B.; Atnaw, S. M.; Gebremichael, E. Dissimilar Friction Stir Welding Process-A Review. Adv. Mater. Process. Technol. 2022, 8, 3900–3922. DOI: 10.1080/2374068X.2022.2036446.
   Google Scholar
• Tucci, F.; Carlone, P.; Silvestri, A. T.; Parmar, H.; Astarita, A. Dissimilar Friction Stir Lap Welding of AA2198-AA6082: Process Analysis and Joint Characterization. CIRP J. Manuf. Sci. Technol. 2021, 35, 753–764. DOI: 10.1016/j.cirpj.2021.09.007.
   Web of Science ®Google Scholar
• Patel, V.; De Backer, J.; Hindsefelt, H.; Igestrand, M.; Azimi, S.; Andersson, J.; Säll, J. High-Speed Friction Stir Welding in Light Weight Battery Trays for the EV Industry. Sci. Technol. Weld. Join. 2022, 27(4), 250–255. DOI: 10.1080/13621718.2022.2045121.
   Web of Science ®Google Scholar
• Eskandari, M.; Jamshidi Aval, H.; Jamaati, R. The Study of Thermomechanical and Microstructural Issues in Dissimilar FSW of AA6061 Wrought and A390 Cast Alloys. J. Manuf. Process. 2019, 41(February), 168–176. DOI: 10.1016/j.jmapro.2019.03.040.
   Google Scholar
• Patel, V.; Li, W.; Wang, G.; Wang, F.; Vairis, A.; Niu, P. Friction Stir Welding of Dissimilar Aluminum Alloy Combinations: State-Of-The-Art. Metals (Basel). 2019, 9(3). DOI: 10.3390/met9030270.
   Web of Science ®Google Scholar
• Kalashnikova, T.; Chumaevskii, A.; Kalashnikov, K.; Knyazhev, E.; Gurianov, D.; Panfilov, A.; Nikonov, S.; Rubtsov, V.; Kolubaev, E. Regularities of Friction Stir Processing Hardening of Aluminum Alloy Products Made by Wire-Feed Electron Beam Additive Manufacturing. Metals (Basel). 2022, 12(2). DOI: 10.3390/met12020183.
   Web of Science ®Google Scholar
• Thakur, A.; Mehlwal, S.; Minhas, N.; Sharma, V. Influence of Tool Rotational Speed on the Microstructural Characterization and Mechanical Properties of Friction Stir Welded Al-Si10mg Parts Produced by DMLS Additive Manufacturing Process. Mater. Sci. Eng. B Solid-State Mater. Adv. Technol. 2022, 278(November 2021), 115612. DOI: 10.1016/j.mseb.2022.115612.
   Google Scholar
• Su, Y.; Li, W.; Patel, V.; Vairis, A.; Wang, F. Formability of an AA5083 Aluminum Alloy T-Joint Using SSFSW on Both Corners. Mater. Manuf. Process. 2019, 34(15), 1737–1744. DOI: 10.1080/10426914.2019.1669799.
   Google Scholar
• Sejani, D.; Li, W.; Patel, V. Stationary Shoulder Friction Stir Welding–Low Heat Input Joining Technique: A Review in Comparison with Conventional FSW and Bobbin Tool FSW. In Crit. Rev. Solid State Mater. Sci, 2021. DOI: 10.1080/10408436.2021.1935724.
   Google Scholar
• Yi, D.; Onuma, T.; Mironov, S.; Sato, Y. S.; Kokawa, H.; Yi, D.; Onuma, T.; Mironov, S.; Sato, Y. S.; Kokawa, H. Evaluation of Heat Input During Friction Stir Welding of Aluminium Alloys Evaluation of Heat Input During Friction Stir Welding of Aluminium Alloys. 2017, 1718. DOI: 10.1080/13621718.2016.1183079.
   Google Scholar
• Plate, C. S.; Bar, R.; Strip, T. A. Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by. 2002, 96(Reapproved), 2–5. DOI: 10.1520/D3528-96R16.2.
   Google Scholar
• Geels, K.; Fowler, D.; Kopp, W. -U.; Rx Ckert, M. M. Metallographic and Materialographic Specimen Preparation, Light Microscopy, Image Analysis and Hardness Testing; ASTM international: West Conshohocken, 2007.
   Google Scholar
• Kalemba, I.; Dymek, S.; Hamilton, C.; Blicharski, M. Microstructure and Mechanical Properties of Friction Stir Welded 7136–T76 Aluminium Alloy. Mater. Sci. Technol. 2011, 27(5), 903–908. DOI: 10.1179/026708309X12584564052175.
   Web of Science ®Google Scholar
• McQueen, H. J.; Cabibbo, M.; Evangelista, E. Piercing/Extrusion and FSW Nugget Microstructure Formation in Al Alloys. Mater. Sci. Technol. 2007, 23(7), 803–809. DOI: 10.1179/174328407X161178.
   Web of Science ®Google Scholar
• El Hassanin, A.; Obeidi, M. A.; Scherillo, F.; Brabazon, D. CO2 Laser Polishing of Laser-Powder Bed Fusion Produced AlSi10mg Parts. Surf. Coatings Technol. 2021, 419(March), 127291. DOI: 10.1016/j.surfcoat.2021.127291.
   Google Scholar
• Morisada, Y.; Imaizumi, T.; Fujii, H. Clarification of Material Flow and Defect Formation During Friction Stir Welding. Sci. Technol. Weld. Join. 2015, 20(2), 130–137. DOI: 10.1179/1362171814Y.0000000266.
   Web of Science ®Google Scholar
• Selvaraj, M.; Murali, V.; Koteswara Rao, S. R. Mechanism of Weld Formation During Friction Stir Welding of Aluminum Alloy. Mater. Manuf. Process. 2013, 28(5), 595–600. DOI: 10.1080/10426914.2013.763956.
   Web of Science ®Google Scholar
• Threadgill, P. L. Terminology in Friction Stir Welding. Sci. Technol. Weld. Join. 2007, 12(4), 357–360. DOI: 10.1179/174329307X197629.
   Web of Science ®Google Scholar
• Ozan, S. Effect of Friction Stir Welding on the Microstructure and Mechanical Properties of AA 6063-T6 Aluminum Alloy. Materwiss. Werksttech. 2020, 51(8), 1100–1119. DOI: 10.1002/mawe.201900186.
   Web of Science ®Google Scholar
• Pang, J. J.; Liu, F. C.; Liu, J.; Tan, M. J.; Blackwood, D. J. Friction Stir Processing of Aluminium Alloy AA7075: Microstructure, Surface Chemistry and Corrosion Resistance. Corros. Sci. 2016, 106, 217–228. DOI: 10.1016/j.corsci.2016.02.006.
   Web of Science ®Google Scholar
• Patel, V.; Li, W.; Vairis, A.; Badheka, V. Recent Development in Friction Stir Processing as a Solid-State Grain Refinement Technique: Microstructural Evolution and Property Enhancement. Crit. Rev. Solid State Mater. Sci. 2019, 44(5), 378–426. DOI: 10.1080/10408436.2018.1490251.
   Web of Science ®Google Scholar
• Patel, V.; Badheka, V.; Li, W.; Akkireddy, S. Hybrid Friction Stir Processing with Active Cooling Approach to Enhance Superplastic Behavior of AA7075 Aluminum Alloy. Arch. Civ. Mech. Eng. 2019, 19(4), 1368–1380. DOI: 10.1016/j.acme.2019.08.007.
   Web of Science ®Google Scholar