Effect of nanoparticles mixing-ratio of Al₂O₃-MWCNT hybrid nano-cutting fluid during MQL turning

References

• Siniawski, M.; Bowman, C. Metal Working Fluids: Finding Green in the Manufacturing Process. Ind. Lubr. Tribol. 2009, 61(2), 60–66. DOI: 10.1108/00368790910940374.
   Web of Science ®Google Scholar
• Sreejith, P. S.; Ngoi, B. K. A. Dry Machining: Machining of the Future. J. Mater. Process. Tech. 2000, 101(1–3), 287–291. DOI: 10.1016/S0924-0136(00)00445-3.
   Web of Science ®Google Scholar
• Mohanty, A.; Gangopadhyay, S.; Thakur, A. On Applicability of Multilayer Coated Tool in Dry Machining of Aerospace Grade Stainless Steel. Mater. Manuf. Process. 2016, 31(7), 869–879. DOI: 10.1080/10426914.2015.1070413.
   Web of Science ®Google Scholar
• Thakur, A.; Gangopadhyay, S. Evaluation of Micro-Features of Chips of Inconel 825 During Dry Turning with Uncoated and Chemical Vapour Deposition Multilayer Coated Tools. Proc. Inst. Mech. Eng. B J. Eng. Manuf. 2018, 232(6), 979–994. DOI: 10.1177/0954405416661584.
   Web of Science ®Google Scholar
• Kundrak, J.; Mamalis, A. G.; Gyani, K.; Markopoulos, A. Environmentally Friendly Precision Machining. Mater. Manuf. Process. 2006, 21(1), 29–37. DOI: 10.1080/AMP-200060612.
   Web of Science ®Google Scholar
• Boswell, B.; Islam, M. N.; Davies, I. J.; Ginting, Y. R.; Ong, A. K. A Review Identifying the Effectiveness of Minimum Quantity Lubrication (MQL) During Conventional Machining. Int. J. Adv. Manuf. Technol. 2017, 92(1–4), 321–340. DOI: 10.1007/s00170-017-0142-3.
   Web of Science ®Google Scholar
• Davim, J. P.; Sreejith, P. S.; Silva, J. Turning of Brasses Using Minimum Quantity of Lubricant(mql) and Flooded Lubricant Conditions. Mater. Manuf. Process. 2007, 22(1), 45–50. DOI: 10.1080/10426910601015881.
   Web of Science ®Google Scholar
• Banerjee, N.; Sharma, A. Improving Machining Performance of Ti-6al-4V Through Multi-Point Minimum Quantity Lubrication Method. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2019, 233(1), 321–336. DOI: 10.1177/0954405417754164.
   Web of Science ®Google Scholar
• Masoudi, S.; Vafadar, A.; Hadad, M.; Jafarian, F. Experimental Investigation into the Effects of the Nozzle Position, Workpiece Hardness and Tool Type in MQL Turning of AISI 1045 Steel. Mater. Manuf. Process. 2018, 33(9), 1011–1019. DOI: 10.1080/10426914.2017.1401716.
   Web of Science ®Google Scholar
• Gupta, M. K.; Mia, M.; Jamil, M.; Singh, R.; Singla, A. K.; Song, Q.; Liu, Z.; Kha, A. M.; Rahman, M. A.; Sarikaya, M. Machinability Investigations of Hardened Steel with Biodegradable Oil-Based MQL Spray System. Int. J. Adv. Manuf. Technol. 2020, 108(3), 735–748. DOI: 10.1007/s00170-020-05477-6.
   Web of Science ®Google Scholar
• Amrita, M.; Srikant, R. R.; Sitaramaraju, A. V. Performance Evaluation of Nanographite –Based Cutting Fluid in Machining Process. Mater. Manuf. Process. 2014, 29(5), 600–605. DOI: 10.1080/10426914.2014.893060.
   Web of Science ®Google Scholar
• Abbas, A. T.; Benyahia, F.; El Rayes, M. M.; Pruncu, C.; Taha, M. A.; Hegab, H. Towards Optimization of Machining Performance and Sustainability Aspects When Turning AISI 1045 Steel Under Different Cooling and Lubrication Strategies. Materials. 2019, 12(18), 3023. DOI: 10.3390/ma12183023.
   PubMed Web of Science ®Google Scholar
• Patole, P. B.; Kulkarni, V. V.; Bhatwadekar, S. G. MQL Machining with Nano Fluid: A Review. Manuf. Rev. 2021, 8, 13. DOI: 10.1051/mfreview/2021011.
   Web of Science ®Google Scholar
• Singh, R. K.; Dixit, A. R.; Sharma, A. K.; Tiwari, A. K.; Madal, V.; Pramanik, A. Influence of Graphene and Multi-Walled Carbon Nanotube Additives on Tribological Behaviour of Lubricants. Int. J. Surf. Sci. Eng. 2018, 12(3), 207–227. DOI: 10.1504/IJSURFSE.2018.094773.
   Web of Science ®Google Scholar
• Gong, L.; Bertolini, R.; Ghiotti, A.; He, N.; Bruschi, S. Sustainable Turning of Inconel 718 Nickel Alloy Using MQL Strategy Based on Graphene Nanofluids. Int. J. Adv. Manuf. Technol. 2020, 108(9), 3159–3174. DOI: 10.1007/s00170-020-05626-x.
   Web of Science ®Google Scholar
• Dash, L.; Padhan, S.; Das, S. R. Design Optimization for Analysis of Surface Integrity and Chip Morphology in Hard Turning. Struct. Eng. Mech. 2020, 76(5), 561–578. DOI: 10.12989/sem.2020.76.5.561.
   Web of Science ®Google Scholar
• Ibrahim, A. M. M.; Omer, M. A.; Das, S. R.; Li, W.; Alsoufi, M. S.; Elsheikh, A. Evaluating the Effect of Minimum Quantity Lubrication During Hard Turning of AISI D3 Steel Using Vegetable Oil Enriched with Nano-Additives. Alex Eng J. 2022, 61(12), 10925–10938. DOI: 10.1016/j.aej.2022.04.029.
   Web of Science ®Google Scholar
• Mahapatra, S.; Das, A.; Jena, P. C.; Das, S. R. Turning of Hardened AISI H13 Steel with Recently Developed S3P-Altisin Coated Carbide Tool Using MWCNT Mixed Nanofluid Under Minimum Quantity Lubrication. Proc. Inst. Mech. Eng. Part C. 2022, 237(4), 1–22. DOI: 10.1177/09544062221126357.
   Web of Science ®Google Scholar
• Duc, T. M.; Long, T. T.; Chien, T. Q. Performance Evaluation of MQL Parameters Using Al2O3 and MoS2 Nanofluids in Hard Turning 90crsi Steel. Lubricants. 2019, 7(5), 40. DOI: 10.3390/lubricants7050040.
   Web of Science ®Google Scholar
• Das, A.; Patel, S. K.; Biswal, B. B.; Das, S. R. Performance Evaluation of Aluminium Oxide Nano Particles in Cutting Fluid with Minimum Quantity Lubrication Technique in Turning of Hardened AISI 4340 Alloy Steel. Sci. Iran. 2020, 27(6), 2838–2852. DOI: 10.24200/SCI.2019.51223.2069.
   Web of Science ®Google Scholar
• Javid, H.; Jahanzaib, M.; Jawad, M.; Ali, M. A.; Farooq, M. U.; Pruncu, C. I.; Hussain, S. Parametric Analysis of Turning HSLA Steel Under Minimum Quantity Lubrication(mql) and Nanofluids-Based Minimum Quantity Lubrication(NF-MQL): A Concept of One-Step Sustainable Machining. Int. J. Adv. Manuf. Technol. 2021, 117(5), 1915–1934. DOI: 10.1007/s00170-021-07776-y.
   Web of Science ®Google Scholar
• Vasu, V.; Pradeep Kumar Reddy, G. Effect of Minimum Quantity Lubrication with Al2O3 Nanoparticles on Surface Roughness, Tool Wear and Temperature Dissipation in Machining Inconel 600 Alloy. Proc. Inst. Mech. Eng. Part N J. Nanoeng. Nanosyst. 2011, 225(1), 3–16. DOI: 10.1177/1740349911427520.
   Google Scholar
• Roy, S.; Ghosh, A. High Speed Turning of AISI 4140 Steel by Multi-Layered TiN Top-Coated Insert with Minimum Quantity Lubrication Technology and Assessment of Near Tool-Tip Temperature Using Infrared Thermography. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2014, 228(9), 1058–1067. DOI: 10.1177/0954405413514570.
   Web of Science ®Google Scholar
• Akincioglu, S.; Sirin, S. Evaluation of the Tribological Performance of the Green hBn Nanofluid on the Friction Characteristics of AISI 316L Stainless Steel. Ind. Lubr. Tribol. 2021, 73(9), 1176–1186. DOI: 10.1108/ILT-04-2021-0140.
   Web of Science ®Google Scholar
• Zhang, Y.; Li, C.; Jia, D.; Zhang, D.; Zhang, X. Experimental Evaluation of the Lubrication Performance of MoS2/CNT Nanofluid for Minimal Quantity Lubrication in Ni-Based Alloy Grinding. Int. J. Mach. Tools Manuf. 2015, 99, 19–33. DOI: 10.1016/j.ijmachtools.2015.09.003.
   Web of Science ®Google Scholar
• Dubey, V.; Sharma, A. K.; Vats, P.; Pimenov, D. Y.; Giasin, K.; Chuchala, D. Study of a Multicriterion Decision-Making Approach to the MQL Turning of AISI 304 Steel Using Hybrid Nanocutting Fluid. Materials. 2021, 14(23), 7207. DOI: 10.3390/ma14237207.
   PubMed Web of Science ®Google Scholar
• Singh, R. K.; Sharma, A. K.; Dixit, A. R.; Tiwari, A. K.; Pramanik, A.; Mandal, A. Performance Evaluation of Alumina-Graphene Hybrid Nano-Cutting Fluid in Hard Turning. J. Clean. Prod. 2017, 162, 830–845. DOI: 10.1016/j.jclepro.2017.06.104.
   Web of Science ®Google Scholar
• Junankar, A. A.; Yashpal, Y.; Purohit, J. K. Experimental Investigation to Study the Effect of Synthesized and Characterized Monotype and Hybrid Nanofluids in Minimum Quantity Lubrication Assisted Turning of Bearing Steel. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 2022, 236(9), 1794–1813. DOI: 10.1177/13506501211038113.
   Web of Science ®Google Scholar
• Singh, V.; Sharma, A. K.; Sahu, R. K.; Katiyar, J. K. State of the Art on Sustainable Manufacturing Using Mono/Hybrid Nano-Cutting Fluids with Minimum Quantity Lubrication. Mater. Manuf. Process. 2022, 37(6), 603–639. DOI: 10.1080/10426914.2022.2032147.
   Web of Science ®Google Scholar
• Gao, Y.; An, J.; Xi, Y.; Yang, Z.; Liu, J.; Mujumdar, A. S.; Wang, L.; Sasmito, A. P. Thermal Conductivity and Stability of Novel Aqueous Graphene Oxide- Al2O3 Hybrid Nanofluids for Cold Energy Storage. Appl. Sci. 2020, 10(17), 5768. DOI: 10.3390/app10175768.
   Google Scholar
• Li, H.; Qiu, Y. D. Sedimentation and Aggregation of Multiwalled Carbon Nanotubes as Affected by Single and Binary Mixed Surfactants. R. Soc. open sci. 2019, 6(7), 190241. DOI: 10.1098/rsos.190241.
   PubMed Web of Science ®Google Scholar
• Dhananchezian, M.; Kumar, M. P.; Sornakumar, T. Cryogenic Turning of AISI 304 Stainless Steel with Modified Tungsten Carbide Tool Inserts. Mater. Manuf. Process. 2011, 26(5), 781–785. DOI: 10.1080/10426911003720821.
   Web of Science ®Google Scholar
• Kulkarni, A. P.; Sargade, V. G. Characterization and Performance of AlTin, AlTicrn, TiN/TiAln PVD Coated Carbide Tools While Turning SS 304. Mater. Manuf. Process. 2015, 30(6), 748–755. DOI: 10.1080/10426914.2014.984217.
   Web of Science ®Google Scholar
• Kumar, A.; Singh, H.; Kumar, V. Study the Parametric Effect of Abrasive Water Jet Machining on Surface Roughness of Inconel 718 Using RSM-BBD Techniques. Mater. Manuf. Process. 2018, 33(13), 1483–1490. DOI: 10.1080/10426914.2017.1401727.
   Web of Science ®Google Scholar
• Mohal, S.; Kumar, H. Parametric Optimization of Mutiwalled Carbon Nanotube-Assisted Electric Discharge Machining of Al -10% SiCp Metal Matrix Composite by Response Surface Methodology. Mater. Manuf. Process. 2017, 32(3), 263–273. DOI: 10.1080/10426914.2016.1140196.
   Web of Science ®Google Scholar
• Mechiri, S. K.; Vasu, V.; Venu Gopal, A. Investigation of Thermal Conductivity and Rheological Properties of Vegetable Oil Based Hybrid Nanofluids Containing Cu-Zn Hybrid Nanoparticles. Exp. Heat Tranf. 2017, 30(3), 205–217. DOI: 10.1080/08916152.2016.1233147.
   Web of Science ®Google Scholar
• Jafarimoghaddam, A.; Aberoumand, S.; Jafarimoghaddam, R. A New Turbine Model for Enhancing Convective Heat Transfer in the Presence of Low Volume Concentration of Ag-Oil Nanofluids. Heat Mass Transf. 2018, 54(5), 1491–1501. DOI: 10.1007/s00231-017-2243-9.
   Web of Science ®Google Scholar
• Kumar, V.; Sarkar, J. Particle Ratio Optimization of Al2O3-MWCNT Hybrid Nanofluid in Minichannel Heat Sink for Best Hydrothermal Performance. App. Ther. Eng. 2020, 165, 114546. DOI: 10.1016/j.applthermaleng.2019.114546.
   Web of Science ®Google Scholar
• ManojKumar, K.; Ghosh, A. Assessment of Cooling-Lubrication and Wettability Characteristics of Nano-Engineered Sunflower Oil as Cutting Fluid and Its Impact on SQCL Grinding Performance. J. Mater. Process. Technol. 2016, 237, 55–64. DOI: 10.1016/j.jmatprotec.2016.05.030.
   Web of Science ®Google Scholar
• Singh, T.; Dureja, J. S.; Dogra, M.; Bhatti, M. S. Multi-Response Optimization in Environment Friendly Turning of AISI 304 Austenitic Stainless Steel. Multidiscip. Model. Mater. Struct. 2018, 15(3), 538–558. DOI: 10.1108/MMMS-07-2018-0139.
   Web of Science ®Google Scholar
• Sharma, A. K.; Katiyar, J. K.; Bhaumik, S.; Roy, S. Influence of Alumina/MWCNT Hybrid Nanoparticle Additives on Tribological Properties of Lubricants in Turning Operations. Friction. 2019, 7(2), 153–168. DOI: 10.1007/s40544-018-0199-5.
   Web of Science ®Google Scholar