Investigation on the impact of sub-zero treated electrodes in EDM

References

• Bilal, A.; Perveen, A.; Talamona, D.; Jahan, M. P. Understanding Material Removal Mechanism and Effects of Machining Parameters During Edm of Zirconia-Toughened Alumina Ceramic. Micromachines. 2021, 12(67), 1–21. DOI: 10.3390/mi12010067.
   Google Scholar
• Pragadish, N.; Pradeep Kumar, M. Comparison of Surface Characteristics and Micro Hardness of AISI D2 Tool Steel and LM13 Aluminum Alloy Machined Under Dry EDM (Green Machining) Process. FME. Trans. 2021, 49(2), 488–493. DOI: 10.5937/fme2102488P.
   Web of Science ®Google Scholar
• Nahak, B.; Gupta, A. A Review on Optimization of Machining Performances and Recent Developments in Electro Discharge Machining. Manuf. Rev. 2019, 6, 6. DOI: 10.1051/mfreview/2018015.
   Web of Science ®Google Scholar
• Choubey, M.; Maity, K. P.; Sharma, A. Finite Element Modeling of Material Removal Rate in Micro-EDM Process with and without Ultrasonic Vibration. GS. 2020, 10(3), 311–319. DOI: 10.1108/GS-11-2019-0047.
   Google Scholar
• Pradhan, B. B.; Bhattacharyya, B. Modelling of Micro-Electrodischarge Machining During Machining of Titanium Alloy Ti-6Al-4V Using Response Surface Methodology and Artificial Neural Network Algorithm. Proc. Inst. Mech. Eng. B J. Eng. Manuf. 2009, 223(6), 683–693. DOI: 10.1243/09544054JEM1343.
   Web of Science ®Google Scholar
• Jain, V. K.; Priyadarshini, D. Fabrication of Microchannels in Ceramics (Quartz) Using Electrochemical Spark Micromachining (ECSMM). J. Adv. Manuf. Syst. 2014, 13(1), 5–16. DOI: 10.1142/S0219686714500012.
   Google Scholar
• Abdudeen, A.; Qudeiri, J. E. A.; Kareem, A.; Ahammed, T.; Ziout, A. Recent Advances and Perceptive Insights into Powder-Mixed Dielectric Fluid of EDM. Micromachines. 2020, 11(8), 754. DOI: 10.3390/MI11080754.
   PubMed Web of Science ®Google Scholar
• Kumar, A.; Maheshwari, S.; Sharma, C.; Beri, N. Machining Efficiency Evaluation of Cryogenically Treated Copper Electrode in Additive Mixed EDM. Mater. Manuf. Process. 2012, 27(10), 1051–1058. DOI: 10.1080/10426914.2011.654151.
   Web of Science ®Google Scholar
• Pillai, K. V. A.; Hariharan, P.; Jafferson, J. M. Μed Milling of Ti-6Al-4V Using Cryogenic-Treated Wc Tool and Nano-Graphene Powder-Mixed Dielectric at Different Discharge Energy Regimes. Int. J. Adv. Manuf. Technol. 2019, 102(9–12), 2721–2743. DOI: 10.1007/s00170-019-03327-8.
   Web of Science ®Google Scholar
• Kumar, S.; Singh, R.; Batish, A.; Singh, T. P. Study the Surface Characteristics of Cryogenically Treated Tool- Electrodes in Powder Mixed Electric Discharge Machining Process. Mater. Sci. Forum. 2015, 808, 19–33. DOI: 10.4028/www.scientific.net/MSF.808.19.
   Google Scholar
• Gholipoor, A.; Baseri, H.; Shakeri, M.; Shabgard, M. Investigation of the Effects of Magnetic Field on Near-Dry Electrical Discharge Machining Performance. Proc. Inst. Mech. Eng. B J. Eng. Manuf. 2016, 230(4), 744–751. DOI: 10.1177/0954405414558737.
   Web of Science ®Google Scholar
• Kumar, A.; Sharma, R. Multi-Response Optimization of Magnetic Field Assisted EDM Through Desirability Function Using Response Surface Methodology. J. Mech. Behav. Mater. 2020, 29(1), 19–35. DOI: 10.1515/jmbm-2020-0003.
   Google Scholar
• Bhattacharyya, B.; Doloi, B.; Sarkar, B. R.; Mukhopadhyay, P.; Mishra, K. Improvement of Micro-EDM Performances with Aid of Vibration. Int. J. Precis. Technol. 2018, 8(1), 38–65. DOI: 10.1504/IJPTECH.2018.094081.
   Google Scholar
• Liu, Y.; Wang, W.; Zhang, W.; Ma, F.; Yang, D.; Sha, Z.; Zhang, S. Experimental Study on Electrode Wear of Diamond-Nickel Coated Electrode in EDM Small Hole Machining. Adv. Mater. Sci. Eng. 2019, 2019, 1–10. DOI: 10.1155/2019/7181237.
   Web of Science ®Google Scholar
• Pham Van, D.; Shirguppikar, S.; Nguyen Huu, P.; Nguyen Duc, M.; Bui Tien, T.; Le Thi Phuong, T.; Nguyen Trong, L. Multi-Objects Optimization in μ-EDM Using AlCrN Coated Tungsten Carbide Electrode by Deng’s Method. Manuf. Rev. (Les Ulis). 2022, 9(19). DOI: 10.1051/mfreview/2022018.
   Google Scholar
• Phan Nguyen, H.; Vu Ngo, N.; Tam Nguyen, C. Study on Multi-Objects Optimization in EDM with Nickel Coated Electrode Using Taguchi - AHP - Topsis. Int. J. Eng. Trans. B: Appl. 2022, 35(2), 276–282. DOI: 10.5829/IJE.2022.35.02B.02.
   Web of Science ®Google Scholar
• Huu, P. N.; Duc, T. N.; Shirguppikar, S. Simultaneous Improvement of Z-Coordinate and Overcut in EDM of Titanium Grade 5 Alloy Using a Carbon-Coated Micro-Tool Electrode. Mod. Phys. Lett. B. 2023, 37(16). DOI: 10.1142/s0217984923400043.
   Web of Science ®Google Scholar
• Thangamani, G.; Thangaraj, M.; Anand, P. I.; Jayakumar, M.; Karkalos, N. E.; Papazoglou, E. L.; Karmiris-Obratański, P. Influence of Silver-Coated Tool Electrode on Electrochemical Micromachining of Incoloy 825. Coatings. 2023, 13(5), 963. DOI: 10.3390/coatings13050963.
   Web of Science ®Google Scholar
• Ishfaq, K.; Waseem, M. U.; Sana, M. Investigating Cryogenically Treated Electrodes’ Performance Under Modified Dielectric(s) for EDM of Inconel (617). Mater. Manuf. Process. 2022, 37(16), 1902–1911. DOI: 10.1080/10426914.2022.2065016.
   Web of Science ®Google Scholar
• Jafferson, J. M.; Hariharan, P. Machining Performance of Cryogenically Treated Electrodes in Microelectric Discharge Machining: A Comparative Experimental Study. Mater. Manuf. Process. 2013, 28(4), 397–402. DOI: 10.1080/10426914.2013.763955.
   Web of Science ®Google Scholar
• Rahul; Datta, S.; Biswal, B. B. Experimental Studies on Electro-Discharge Machining of Inconel 825 Super Alloy Using Cryogenically Treated Tool/Workpiece. Meas. (Lond.). 2019, 145, 611–630. DOI: 10.1016/j.measurement.2019.06.006.
   Web of Science ®Google Scholar
• Rahul; Datta, S.; Biswal, B. B.; Mahapatra, S. S.; Electrical Discharge Machining of Inconel 825 Using Cryogenically Treated Copper Electrode: Emphasis on Surface Integrity and Metallurgical Characteristics. J. Manuf. Process. 2017, 26, 188–202. DOI: 10.1016/j.jmapro.2017.02.020.
   Web of Science ®Google Scholar
• Kumar, S.; Batish, A.; Singh, R.; Bhattacharya, A. Effect of Cryogenically Treated Copper-Tungsten Electrode on Tool Wear Rate During Electro-Discharge Machining of Ti-5Al-2.5Sn Alloy. Wear. 2017, 386-387, 223–229. DOI: 10.1016/j.wear.2017.01.067.
   Web of Science ®Google Scholar
• Abdulkareem, S.; Khan, A. A.; Konneh, M. Reducing Electrode Wear Ratio Using Cryogenic Cooling During Electrical Discharge Machining. Int. J. Adv. Manuf. Technol. 2009, 45(11–12), 1146–1151. DOI: 10.1007/s00170-009-2060-5.
   Web of Science ®Google Scholar
• Manivannan, R.; Pradeep Kumar, M. Improving the Machining Performance Characteristics of the Μedm Drilling Process by the Online Cryogenic Cooling Approach. Mater. Manuf. Process. 2018, 33(4), 390–396. DOI: 10.1080/10426914.2017.1303145.
   Web of Science ®Google Scholar
• Goyal, R.; Sngh, S.; Kumar, H. Performance Evaluation of Cryogenically Assisted Electric Discharge Machining (CEDM) Process. Mater. Manuf. Process. 2018, 33(4), 433–443. DOI: 10.1080/10426914.2017.1317789.
   Web of Science ®Google Scholar
• Srivastava, V.; Pandey, P. M. Performance Evaluation of Electrical Discharge Machining (EDM) Process Using Cryogenically Cooled Electrode. Mater. Manuf. Process. 2012, 27(6), 683–688. DOI: 10.1080/10426914.2011.602790.
   Web of Science ®Google Scholar
• Gupta, K.; Laubscher, R. F. Sustainable Machining of Titanium Alloys: A Critical Review. Proc. Inst. Mech. Eng. B J. Eng. Manuf. 2017, 231(14), 2543–2560. DOI: 10.1177/0954405416634278.
   Web of Science ®Google Scholar
• Abu Qudeiri, J. E.; Mourad, A. H. I.; Ziout, A.; Abidi, M. H.; Elkaseer, A. Electric Discharge Machining of Titanium and Its Alloys: Review. Int. J. Adv. Manuf. Technol. 2018, 96(1), 1319–1339. DOI: 10.1007/S00170-018-1574-0.
   Web of Science ®Google Scholar
• Karmiris-Obratański, P.; Zagórski, K.; Papazoglou, E. L.; Markopoulos, A. P. Surface Texture and Integrity of Electrical Discharged Machined Titanium Alloy. Int. J. Adv. Manuf. Technol. 2021, 115(3), 733–747. DOI: 10.1007/s00170-020-06159-z.
   Web of Science ®Google Scholar
• George, A.; Sahu, T. S.; Dhanish, P. B.; Mathew, J.; Kuriachen, B. Tool Surface Modification Methodology to Improve the Machinability of Ti6Al4V Through Combination of Micro-EDM Texturing and AlSi-10Mg Soft Coating Techniques in Dry Turning. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 2023, 237(22), 5330–5351. DOI: 10.1177/09544062231163417.
   Web of Science ®Google Scholar
• Pramanik, A.; Basak, A. K.; Littlefair, G.; Debnath, S.; Prakash, C.; Singh, M. A.; Marla, D.; Singh, R. K. Methods and Variables in Electrical Discharge Machining of Titanium Alloy – a Review. Heliyon. 2020, 6(12), e05554. DOI: 10.1016/j.heliyon.2020.e05554.
   PubMed Web of Science ®Google Scholar
• Gill, S. S.; Singh, J. Effect of Deep Cryogenic Treatment on Machinability of Titanium Alloy (Ti-6246) in Electric Discharge Drilling. Mater. Manuf. Process. 2010, 25(6), 378–385. DOI: 10.1080/10426910903179914.
   Web of Science ®Google Scholar
• Rahul; Mishra, D. K.; Datta, S.; Masanta, M. Effects of Tool Electrode on EDM Performance of Ti-6Al-4V. Silicon. 2018, 10(5), 2263–2277. DOI: 10.1007/s12633-018-9760-0.
   Web of Science ®Google Scholar
• Pradhan, R. C.; Das, D.; Sahoo, B. P.; Chaubey, A. K. Machinability of Squeeze Cast (TiB2+cnt)/Al 7075 Metal Matrix Nano-Composite During EDM with Untreated and Cryogenic Treated Cu Electrodes: A Comparative Study. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 2022, 236(23), 11304–11321. DOI: 10.1177/09544062221110394.
   Web of Science ®Google Scholar
• Sundaram, M. M.; Yildiz, Y.; Rajurkar, K. P. Experimental Study of the Effect of Cryogenic Treatment on the Performance of Electro Discharge Machining. In Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009; 2009; Vol. 2. DOI: 10.1115/MSEC2009-84247.
   Google Scholar
• Tahir, W.; Jahanzaib, M.; Raza, A. Effect of Process Parameters on Cutting Speed of Wire EDM Process in Machining HSLA Steel with Cryogenic Treated Brass Wire. Adv. Prod. Eng. Manag. 2019, 14(2), 143–152. DOI: 10.14743/apem2019.2.317.
   Web of Science ®Google Scholar
• Gong, L.; Su, Y.; Liu, Y.; Zhao, W.; Khan, A. M.; Jamil, M. Investigation on Machinability Characteristics of Inconel 718 Alloy in Cryogenic Machining Processes. Lubricants. 2023, 11(2), 82. DOI: 10.3390/lubricants11020082.
   Web of Science ®Google Scholar
• Marafona, J. Black Layer Characterisation and Electrode Wear Ratio in Electrical Discharge Machining (EDM). J. Mater. Process. Technol. 2007, 184(1–3), 27–31. DOI: 10.1016/j.jmatprotec.2006.10.045.
   Web of Science ®Google Scholar
• Muthuramalingam, T.; Mohan, B.; Rajadurai, A.; Arul Prakash, M. D. A. Experimental Investigation of ISO Energy Pulse Generator on Performance Measures in EDM. Mater. Manuf. Process. 2013, 28(10). DOI: 10.1080/10426914.2013.811749.
   Web of Science ®Google Scholar