Experimental evaluation and prediction on drilling of Corchorus olitorius filler-based composite

References

• El Hawary, O.; Boccarusso, L.; Ansell, M. P.; Durante, M.; Pinto, F. An Overview of Natural Fiber Composites for Marine Applications. J. Mar. Sci. Eng. 2023, 11(5), 1076. DOI: 10.3390/jmse11051076.
   Web of Science ®Google Scholar
• John, R.; Lin, R.; Jayaraman, K.; Bhattacharyya, D. Effects of Machining Parameters on Surface Quality of Composites Reinforced with Natural Fibers. Mater. Manuf. Process. 2021, 36(1), 73–83. DOI: 10.1080/10426914.2020.1813896.
   Web of Science ®Google Scholar
• Mahakur, V. K.; Bhowmik, S.; Patowari, P. K.; Kumar, S. Effect of Alkaline Treatment on Physical, Mechanical, and Thermal Characteristics of Jute Filler Reinforced Epoxy Composites. J. Vinyl Addit. Technol. 2023, 29(2), 330–342. DOI: 10.1002/vnl.21963.
   Web of Science ®Google Scholar
• Mahakur, V. K.; Bhowmik, S.; Patowari, P. K. Machining Parametric Study on the Natural Fiber Reinforced Composites: A Review. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 2022, 236(11), 6232–6249. DOI: 10.1177/09544062211063752.
   Web of Science ®Google Scholar
• Huang, X.; Yang, L.; Meng, L.; Lu, J. Mechanical and Thermal Properties of Cellulose Nanocrystals from Jute Fibers Reinforced Epoxy Composites. J. Text. Inst. 2022, 113(9), 1983–1987. DOI: 10.1080/00405000.2021.195854358543.
   Web of Science ®Google Scholar
• Muiruri, J. K.; Chuan Yeo, J. C.; Zhu, Q.; Ye, E.; Loh, X. J.; Li, Z. Sustainable Mycelium-Bound Biocomposites: Design Strategies, Materials Properties, and Emerging Applications. ACS Sustain. Chem. Eng. 2023, 11(18), 6801–6821. DOI: 10.1021/acssuschemeng.3c00831meng.3c00831.
   Web of Science ®Google Scholar
• Debnath, K.; Singh, I.; Srivatsan, T. S. An Innovative Tool for Engineering Good-Quality Holes in Composite Laminates. Mater. Manuf. Process. 2017, 32(9), 952–957. DOI: 10.1080/10426914.2016.1221084.
   Web of Science ®Google Scholar
• Bajpai, P. K.; Singh, I. Drilling Behavior of Sisal Fiber-Reinforced Polypropylene Composite Laminates. J. Reinf. Plast. Compos. 2013, 32(20), 1569–1576. DOI: 10.1177/073168441349286692866.
   Web of Science ®Google Scholar
• Rezghi, M. H.; Hamedi, M.; Kubouchi, M.; Arao, Y. Experimental Study on Drilling of Jute Fiber Reinforced Polymer Composites. J. Compos. Mater. 2019, 53(3), 283–295. DOI: 10.1177/0021998318782376.
   Web of Science ®Google Scholar
• Rezghi, M. H.; Hamedi, M.; Kubouchi, M.; Arao, Y. Experimental investigation on drilling of natural flax fiber-reinforced composites. Mater. Manuf. Process. 2019, 34(3), 283–292. DOI: 10.1080/10426914.2018.153258432584.
   Web of Science ®Google Scholar
• Tabet, Z.; Belaadi, A.; Boumaaza, M.; Bourchak, M. Drilling of a Bidirectional Jute Fibre and Cork-Reinforced Polymer Biosandwich Structure: ANN and RSM Approaches for Modelling and Optimization. Int. J. Adv. Manuf. Technol. 2021, 117(11–12), 3819–3839. DOI: 10.1007/s00170-021-07679-y.
   Web of Science ®Google Scholar
• Belaadi, A.; Laouici, H.; Bourchak, M. Mechanical and Drilling Performance of Short Jute Fibre-Reinforced Polymer Biocomposites: Statistical Approach. Int. J. Adv. Manuf. Technol. 2020, 106(5–6), 1989–2006. DOI: 10.1007/s00170-019-04761-4.
   Web of Science ®Google Scholar
• Mahakur, V. K.; Paul, R.; Bhowmik, S.; Patowari, P. K. Influence of Surface Modification on Mechanical and Tribology Performance of Jute Filler Polymer Composites and Prediction of the Performance Using Artificial Neural Network. Polym. Bull. 2022, 80(11), 1–22. DOI: 10.1007/s00289-022-04636-x.
   Web of Science ®Google Scholar
• Sakthivel, R.; Abbhijith, H.; Harshini, G. V.; Vardhan, M. S.; Shadangi, K. P. Biofuels: Classification, Conversion Technologies, Optimization Techniques and Applications. Bioref. Prod. Fuels Plat. Chem. 2023, 1–30. DOI: 10.1002/9781119724872.ch1.
   Google Scholar
• Kumar, P. N.; Rajadurai, A.; Muthuramalingam, T. Multi-Response Optimization on Mechanical Properties of Silica Fly Ash Filled Polyester Composites Using Taguchi-Grey Relational Analysis. Silicon. 2018, 10(4), 1723–1729. DOI: 10.1007/s12633-017-9660-8.
   Web of Science ®Google Scholar
• Manurung, J.; Mawengkang, H.; Zamzami, E. Optimizing Support Vector Machine Parameters with Genetic Algorithm for Credit Risk Assessment. J. Phys.: Conf. Ser. 2017, 930, 012026. DOI: 10.1088/1742-6596/930/1/012026.
   Google Scholar
• Debnath, K.; Singh, I.; Dvivedi, A. Drilling Characteristics of Sisal Fiber-Reinforced Epoxy and Polypropylene Composites. Mater. Manuf. Process. 2014, 29(11–12), 1401–1409. DOI: 10.1080/10426914.2014.941870.
   Web of Science ®Google Scholar
• Shalwan, A.; Alsaeed, T.; Yousif, B. Machinability of Polymeric Composites and Future Reinforcements—A Review. J. Mater. Sci. Chem. Eng. 2022, 10(5), 40–72. DOI: 10.4236/msce.2022.105004.
   Google Scholar
• Parodo, G.; Rubino, F.; Sorrentino, L.; Turchetta, S. Temperature analysis in fiber metal laminates drilling: Experimental and numerical results. Polym. Compos. 2022, 43(10), 7600–7615. DOI: 10.1002/pc.26864.
   Web of Science ®Google Scholar
• Ramesh, M.; Gopinath, A. Measurement and Analysis of Thrust Force in Drilling Sisal-Glass Fiber Reinforced Polymer Composites. IOP Conf. Ser Mater. Sci. Eng. 2017, 197(1), 012056. DOI: 10.1088/1757-899X/197/1/012056.
   Google Scholar
• Mallick, R.; Kumar, R.; Panda, A.; Sahoo, A. K. Hard Turning Performance Investigation of AISI D2 Steel Under a Dual Nozzle MQL Environment. Lubricants. 2023, 11(1), 16. DOI: 10.3390/lubricants11010016.
   Web of Science ®Google Scholar
• Singh, J.; Gill, S. S.; Dogra, M.; Singh, R.; Singh, M.; Sharma, S.; Singh, G.; Li, C.; Rajkumar, S. State of the Art Review on the Sustainable Dry Machining of Advanced Materials for Multifaceted Engineering Applications: Progressive Advancements and Directions for Future Prospects. Mater. Res. Express. 2022, 9(6), 064003. DOI: 10.1088/2053-1591/ac6fba.
   Web of Science ®Google Scholar
• Rao, Y. S.; Mohan, N. S.; Shetty, N.; Acharya, S. Drilling Response of Carbon Fabric/Solid Lubricant Filler/Epoxy Hybrid Composites: An Experimental Investigation. J. Compos. Sci. 2023, 7(2), 46. DOI: 10.3390/jcs702004690/jcs7020046.
   Google Scholar
• Kilickap, E.; Çelik, Y. H.; Yenigun, B. Experimental Evaluation of Parameters Affecting Delamination Factor, Tensile Strength, Thrust Force and Surface Roughness in Drilling of GFRP. Surf. Rev. Lett. 2023, 30(4), 2350025. DOI: 10.1142/S0218625X23500257.
   Google Scholar
• Murugesan, V.; Thandavamoorthy, R.; Cheruvu, A.; Vinayagam, M. Modeling and Influence of Thrust Force Torque and Delamination During Drilling of Natural Fiber Composite. Polym. Compos. 2022, 43(9), 6416–6425. DOI: 10.1002/pc.26950.
   Web of Science ®Google Scholar