Tool wear analysis in AISI 52100 steel machining with sustainable approach

References

• Holmberg, K.; Erdemir, A. Influence of Tribology on Global Energy Consumption, Costs and Emissions. Friction. 2017, 5(3), 263–284. DOI: 10.1007/s40544-017-0183-5.
   Web of Science ®Google Scholar
• Borgaonkar, A. V.; Syed, I. Effect of Coatings on Rolling Contact Fatigue and Tribological Parameters of Rolling/Sliding Contacts Under Dry/Lubricated Conditions: A Review. Sādhanā. 2020, 45(1), 1–16. DOI: 10.1007/s12046-020-1266-y.
   Web of Science ®Google Scholar
• Borgaonkar, A.; Syed, I. Effect of Coating Material Properties on the Lubrication Performance of Rolling Contacts Under TEHL Regime. Aust. J. Mech. Eng. 2022, 2020(2), 352–359. DOI: 10.1080/14484846.2019.1710018.
   Google Scholar
• Borgaonkar, A. V.; Potdar, S. B. Frictional and Wear Behavior of Epoxy Resin Based Nanocomposite in Dry Sliding Contact. In Tribology of Polymer and Polymer Composite for Industry 4.0; Jena, H., Katiyar, J. K., and Pattnaik, A., Eds.; Singapore: Springer, 2022; pp. 1–13.
   Google Scholar
• Gulzar, M.; Masjuki, H. H.; Kalam, M. A.; Varman, M.; Zulkifli, N. W. M.; Mufti, R. A.; Zahid, R. Tribological Performance of Nanoparticles as Lubricating Oil Additives. J. Nanoparticle Res. 2016, 18(8), 1–25. DOI: 10.1007/s11051-016-3537-4.
   Web of Science ®Google Scholar
• Nassar, A. M.; Ahmed, N. S.; Nasser, R. M. Jojoba Polymers as Lubricating Oil Additives. Pet.Coal. 2015, 57(2), 120–129.
   Google Scholar
• Borgaonkar, A.; Syed, I. Eco-Friendly Sustainable Machining with MoS2-based Solid Lubricant. Proc. Inst. Mech. Eng. J: J. Eng. Tribol. 2023, 237(9), 1783–1795. DOI: 10.1177/13506501231184304.
   Web of Science ®Google Scholar
• Kumar, A.; Sharma, A. K.; Katiyar, J. K. State-Of-The-Art in Sustainable Machining of Different Materials Using Nano Minimum Quality Lubrication (NMQL). Lubricants. 2023, 11(2), 64. DOI. DOI: 10.3390/lubricants11020064.
   Web of Science ®Google Scholar
• Sen, B.; Mia, M.; Krolczyk, G. M.; Mandal, U. K.; Mondal, S. P. Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing. Int. J. Of Precis. Eng. And Manuf.-Green Tech. 2021, 8(1), 249–280. DOI: 10.1007/s40684-019-00158-6.
   Web of Science ®Google Scholar
• Kumar, P.; Jain, A. K.; Chaurasiya, P. K.; Tiwari, D.; Gopalan, A.; Arockia Dhanraj, J.; Solomon, J. M.; Sivakumar, A.; Velmurugan, K.; Fefeh Rushman, J. Sustainable Machining Using Eco-Friendly Cutting Fluids: A Review. Adv. Mater. Sci. Eng. 2022, 2022, 1–16. DOI: 10.1155/2022/5284471.
   Web of Science ®Google Scholar
• Borgaonkar, A.; Syed, I. Tribological Investigation of Composite MoS2-TiO2-ZrO2 Coating Material by Response Surface Methodology Approach. J. Tribol. 2022, 144(3), 1–9. DOI: 10.1115/1.4051225.
   Web of Science ®Google Scholar
• Meng, R.; Deng, J.; Liu, Y.; Duan, R.; Zhang, G. Improving tribological performance of cemented carbides by combining laser surface texturing and WSC solid lubricant coating. Int. J. Refract. Met. Hard Mater. 2018, 72, 163–171. DOI: 10.1016/j.ijrmhm.2017.12.024.
   Web of Science ®Google Scholar
• Basnyat, P.; Luster, B.; Muratore, C.; Voevodin, A. A.; Haasch, R.; Zakeri, R.; Kohli, P.; Aouadi, S. M. Surface texturing for adaptive solid lubrication. Surf. Coat. Technol. 2008, 203(1–2), 73–79. DOI: 10.1016/j.surfcoat.2008.07.033.
   Web of Science ®Google Scholar
• Borgaonkar, A.; Syed, I. Friction and Wear Behaviour of Composite MoS2–TiO2 Coating Material in Dry Sliding Contact. J. Braz. Soc. Mech. Sci. Eng. 2020, 43(1), 1–13. DOI: 10.1007/s40430-020-02721-8.
   Web of Science ®Google Scholar
• Sivalingam, V.; Zan, Z.; Sun, J.; Selvam, B.; Gupta, M. K.; Jamil, M.; Mia, M. Wear Behaviour of Whisker-Reinforced Ceramic Tools in the Turning of Inconel 718 Assisted by an Atomized Spray of Solid Lubricants. Tribol. Int. 2020, 148, 106235. DOI: 10.1016/j.triboint.2020.106235.
   Web of Science ®Google Scholar
• Divya, C.; Suvarna, R. L.; Singaravel, B. Experimental Investigation on Solid Lubricant Supply Methodology in Turning Process. Mater. Manuf. Process. 2021, 36(15), 1781–1789. DOI: 10.1080/10426914.2021.1945097.
   Web of Science ®Google Scholar
• Kumar, S.; Singh, D.; Kalsi, N. S. Improvement in Machining Performance of Inconel 718 with Solid Lubricants. Jurnal.Teknologi. 2018, 80(6), 27–36. DOI: 10.1080/10426914.2021.1945097.
   Google Scholar
• Devaraj, S.; Malkapuram, R.; Singaravel, B. Performance Analysis of Micro Textured Cutting Insert Design Parameters on Machining of Al-MMC in Turning Process. Int. J. Lightweight Mater. Manuf. 2021, 4(2), 210–217. DOI: 10.1016/j.ijlmm.2020.11.003.
   Google Scholar
• Yang, G.; Feng, W. Short Communication: Experiment Study on Micro-Textured Tool with Internal Cooling. Mech. Sci. 2022, 13(2), 619–623. DOI: 10.5194/ms-13-619-2022.
   Web of Science ®Google Scholar
• Paturi, U. M.; Narala, S. K. Experimental Investigation to Study the Effect of Electrostatic Micro-Solid Lubricant–Coated Carbide Tools on Machinability Parameters in Turning. Proc. Inst. Mech. Eng. B. 2015, 229(5), 693–702. DOI: 10.1177/0954405414530903.
   Web of Science ®Google Scholar
• Khani, S.; Haghighi, S. S.; Razfar, M. R.; Farahnakian, M. Optimization of Dimensional Accuracy in Threading Process Using Solid-Lubricant Embedded Textured Tools. Mater. Manuf. Process. 2022, 37, 294–304. DOI: 10.1080/10426914.2021.1926492.
   Web of Science ®Google Scholar
• Cavaleiro, D.; Figueiredo, D.; Moura, C. W.; Cavaleiro, A.; Carvalho, S.; Fernandes, F. Machining Performance of TiSiN (Ag) Coated Tools During Dry Turning of TiAl6v4 Aerospace Alloy. Ceram. Int. 2021, 47(8), 11799–11806. DOI: 10.1016/j.ceramint.2021.01.021.
   Web of Science ®Google Scholar
• Pušavec, F.; Sterle, L.; Kalin, M.; Mallipeddi, D.; Krajnik, P. Tribology of Solid-Lubricated Liquid Carbon Dioxide Assisted Machining. CIRP.Annals. 2020, 69(1), 69–72. DOI: 10.1016/j.cirp.2020.04.033.
   Web of Science ®Google Scholar
• Naresh, B. M.; Vetrivel, S. M.; Anandan, V.; Dinesh, B. M. Effect of Ionic Liquid as Lubricants in Turning H 13 Tool Steel-An Experimental Study. Mater. Manuf. Process. 2022, 37(16), 1812–1822. DOI: 10.1080/10426914.2022.2065004.
   Web of Science ®Google Scholar
• Tamiloli, N.; Venkatesan, J.; Raja, R.; Vamsi, K. P.; Sampath, K. T. Time Domain and Frequency Domain of Coated Milling Inserts Using FFT Spectrum. Mater. Manuf. Process. 2022, 37(16), 1882–1892. DOI: 10.1080/10426914.2022.2065012.
   Web of Science ®Google Scholar
• Wu, G.; Xu, C.; Xiao, G.; Yi, M.; Chen, Z.; Xu, L. Self-Lubricating Ceramic Cutting Tool Material with the Addition of Nickel Coated CaF2 Solid Lubricant Powders. Int. J. Refract. Met. Hard Mater. 2016, 56, 51–58. DOI: 10.1016/j.ijrmhm.2015.12.003.
   Web of Science ®Google Scholar
• Jianxin, D.; Xuefeng, Y.; Jianhua, L. Self-Lubricating Behaviours of Ceramic Tools in Dry Cutting. Int. J. Mach. Mach. Mater. 2006, 1(2), 213–222. DOI: 10.1504/IJMMM.2006.011066.
   Google Scholar
• Singh, B. K.; Goswami, S.; Ghosh, K.; Roy, H.; Mandal, N. Performance Evaluation of Self-Lubricating CuO Added ZTA Ceramic Inserts in Dry Turning Application. Int. J. Refract. Met. Hard Mater. 2021, 98, 105551. DOI: 10.1016/j.ijrmhm.2021.105551.
   Web of Science ®Google Scholar
• Zhang, K.; Deng, J.; Ding, Z.; Guo, X.; Sun, L. Improving Dry Machining Performance of TiAln Hard-Coated Tools Through Combined Technology of Femtosecond Laser-Textures and WS2 Soft-Coatings. J. Manuf. Process. 2017, 30, 492–501. DOI: 10.1016/j.jmapro.2017.10.018.
   Web of Science ®Google Scholar
• Agarwal, V.; Agarwal, S. Performance Profiling of Solid Lubricant for Eco-Friendly Sustainable Manufacturing. J. Manuf. Process. 2021, 64, 294–305. DOI: 10.1016/j.jmapro.2020.12.070.
   Web of Science ®Google Scholar
• Sikdar, S.; Rahman, M. H.; Menezes, P. L. Synergistic Study of Solid Lubricant Nano-Additives Incorporated in Canola Oil for Enhancing Energy Efficiency and Sustainability. Sustainability. 2021, 14(1), 290. DOI: 10.3390/su14010290.
   Web of Science ®Google Scholar
• Padmini, R.; Krishna, P. V.; Mohana, R. G. K. Performance Assessment of Micro and Nano Solid Lubricant Suspensions in Vegetable Oils During Machining. Proc. Inst. Mech. Eng. B. 2015, 229, 2196–2204. DOI: 10.1177/0954405414548465.
   Web of Science ®Google Scholar
• Muthuraja, A.; Senthilvelan, S. Performance Evaluation of a Tungsten Carbide–Based Self-Lubricant Cutting Tool. Proc. Inst. Mech. Eng. B. 2018, 232, 1825–1836. DOI: 10.1177/0954405416681822.
   Web of Science ®Google Scholar
• Kiliçay, K.; Ulutan, M. Investigation of the Solid Lubrication Effect of Commercial Boron-Based Compounds in End Milling. Int. J. Precis. Eng. Manuf. 2016, 17(4), 517–524. DOI: 10.1007/s12541-016-0065-1.
   Web of Science ®Google Scholar
• Borgaonkar, A. V.; Ismail, S. Tribological Behavior Prediction of Composite MoS2-TiO2 Coating Using Taguchi Coupled Artificial Neural Network Approach. Proc. Inst. Mech. Eng. Part C. 2022, 236(12), 6835–6850. DOI: 10.1177/09544062211065995.
   Web of Science ®Google Scholar
• Borgaonkar, A. V.; Syed, I.; Sonawane, S. H. Fabrication and Characterization of Composite MoS2-TiO2 Coating Material. Proc. Inst. Mech. Eng. Part C. 2022, 236(3), 1838–49. DOI: 10.1177/09544062211015789.
   Web of Science ®Google Scholar
• Borgaonkar, A. V.; Syed, I. Computational Analysis of Composite MoS2-TiO2-ZrO2 Soft Coating on Tribological Performance in Dry Sliding Contact. In Advanced Manufacturing Systems and Innovative Product Design; Deepak, B. B. V. L., Parhi, D. R. K. Biswal, B. B., Eds.; Springer: Singapore, 2021; pp. 978–981.
   Google Scholar
• Borgaonkar, A. V.; Syed, I.; Sonawane, S. H. Effects of Lubrication on Tribological Properties Coating Material of Composite MoS2-TiO2. In Tribological Applications of Composite Materials; Hameed Sultan, M. T., Mohd Jamir, M. R., Abdul Majid, M. S., Azmi, A. I. Saba, N., Eds.; Springer: Singapore, 2020; pp. 267–281.
   Google Scholar
• Borgaonkar, A. V.; Syed, I. Effect of Temperature on the Tribological Performance of MoS2-TiO2 Coating Material. In Advances in Applied Mechanical Engineering; Voruganti, H., Kumar, K., Krishna, P. Jin, X., Eds.; Springer: Singapore, 2020; pp. 611–618.
   Google Scholar
• Mou, W.; Zhu, S. Vibration, Tool Wear and Surface Roughness Characteristics in Turning of Inconel 718 Alloy with Ceramic Insert Under LN2 Machining. J. Braz. Soc. Mech. Sci. Eng. 2020, 42(7), 1–2. DOI: 10.1007/s40430-020-02438-8.
   Web of Science ®Google Scholar
• Kui, G. W. A.; Islam, S.; Reddy, M. M.; Khandoker, N.; Chen, V. L. C. Recent Progress and Evolution of Coolant Usages in Conventional Machining Methods: A Comprehensive Review. Int. J. Adv. Manuf. Technol. 2022, 119(1–2), 3–40. DOI: 10.1007/s00170-021-08182-0.
   PubMed Web of Science ®Google Scholar
• Borgaonkar, A. V.; Rai, D.; Syed, I. Tribological Investigation of Developed Nano-Composite Mos2-Tio2-Zro2 Coating Material. In Tribology and Characterization of Surface Coatings; Sarfraj, A. Vinayak, S. D., Eds.; Wiley-Scrivener: USA, 2022; pp. 33–47.
   Google Scholar
• Mallick, R.; Kumar, R.; Panda, A.; Sahoo, A. K. Current Status of Hard Turning in Manufacturing: Aspects of Cooling Strategy and Sustainability. Lubricants. 2023, 2023(3), 11, p.108. DOI: 10.3390/lubricants11030108.
   Google Scholar
• Dhananchezian, M.; Rajkumar, K.; S, P. Cutting Velocity Influenced Machinability of Monel 400 by Coated Tool. Mater. Manuf. Process. 2023, 38(1), 116–125. DOI: 10.1080/10426914.2022.2105883.
   Web of Science ®Google Scholar
• Ouyang, J. H.; Li, Y. F.; Zhang, Y. Z.; Wang, Y. M.; Wang, Y. J. High-Temperature Solid Lubricants and Self-Lubricating Composites: A Critical Review. Lubricants. 2022, 10(8), 177. DOI: 10.3390/lubricants10080177.
   Web of Science ®Google Scholar
• Bhalerao, V.; Lakade, S. S.; Borgaonkar, A. The Effect of Boron Nitride Nanoparticles on 100Cr6 steel’s Mechanical and Tribological Properties After Vacuum Heat Treatment. Mater. Today: Proc. 2022, 77, 941–945. DOI: 10.1016/j.matpr.2022.12.062.
   Google Scholar
• Bhalerao, V. Y.; Lakade, S. S. Enhancement of Tribological Properties of Cubic and Hexagonal Boron Nitride Nanoparticles Impregnated on Bearing Steel via Vacuum Heat Treatment Method. Coatings. 2022, 12(12), 1940. DOI. DOI: 10.3390/coatings12121940.
   Web of Science ®Google Scholar