Micro-feature fabrication on SS304 stainless steel using WEDM process

References

• Di, S.; Huang, R.; Chi, G. Study on Micro-Machining by Micro-WEDM. In 2006 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems; 2006; 615–619. 10.1109/NEMS.2006.334857.
   Google Scholar
• Jayaganth, A.; Deepak, M. A.; Jayakumar, K. Experimental Study on Effect of Machining Parameters and Environment on Drilling Characteristics of Stainless Steel 304. Appl. Mech. Mater. 2016, 852, 273–278. DOI: 10.4028/www.scientific.net/AMM.852.273.
   Google Scholar
• Patil, P.; Karande, P. Experimental Investigations and Optimization of Machining Parameters in CNC Turning of SS304 Using Coolant at 0 °C. J. Manuf. Mater. Process. 2022, 6(6), 128. DOI: 10.3390/jmmp6060128.
   Google Scholar
• Patel, J. D.; Maniya, K. D. A Review On: Wire Cut Electrical Discharge Machining Process for Metal Matrix Composite. Procedia Manuf. 2018, 20, 253–258. DOI: 10.1016/j.promfg.2018.02.037.
   Google Scholar
• Ghodsiyeh, D.; Golshan, A.; Shirvanehdeh, J. A. Review on Current Research Trends in Wire Electrical Discharge Machining (WEDM). Indian J. Sci. Technol. 2013, 6(2), 4128–4140. DOI: 10.17485/ijst/2013/v6i2.18.
   Google Scholar
• Singh, B.; Misra, J. P. A Critical Review of Wire Electric Discharge Machining. 2016. DOI: 10.2507/daaam.scibook.2016.23.
   Google Scholar
• Pal, V. K.; Choudhury, S. K. Fabrication of Texturing Tool to Produce Array of Square Holes for EDM by Abrasive Water Jet Machining. Int. J. Adv. Manuf. Technol. 2016, 85(9), 2061–2071. DOI: 10.1007/s00170-015-7875-7.
   Web of Science ®Google Scholar
• Zhang, J.; Li, Q.; Zhang, H.; Sui, Y.; Yang, H. Investigation of Micro Square Structure Fabrication by Applying Textured Cutting Tool in WEDM. Micromachines. 2015, 6(10), 1427–1434. DOI: 10.3390/mi6101427.
   Web of Science ®Google Scholar
• Rakwal, D.; Heamawatanachai, S.; Tathireddy, P.; Solzbacher, F.; Bamberg, E. Fabrication of Compliant High Aspect Ratio Silicon Microelectrode Arrays Using Micro-Wire Electrical Discharge Machining. Microsyst. Technol. 2009, 15(5), 789–797. DOI: 10.1007/s00542-009-0792-7.
   Web of Science ®Google Scholar
• Wang, J.; Sánchez, J. A.; Izquierdo, B.; Ayesta, I. Experimental and Numerical Study of Crater Volume in Wire Electrical Discharge Machining. Mater. (Basel). 2020, 13, 3. DOI: 10.3390/ma13030577.
   Web of Science ®Google Scholar
• Singh, M. A.; Das, K.; Sarma, D. K. Thermal Simulation of Machining of Alumina with Wire Electrical Discharge Machining Process Using Assisting Electrode. J. Mech. Sci. Technol. 2018, 32(1), 333–343. DOI: 10.1007/s12206-017-1233-7.
   Web of Science ®Google Scholar
• Salonitis, K.; Stournaras, A.; Stavropoulos, P.; Chryssolouris, G. Thermal Modeling of the Material Removal Rate and Surface Roughness for Die-Sinking EDM. Int. J. Adv. Manuf. Technol. 2009, 40(3), 316–323. DOI: 10.1007/s00170-007-1327-y.
   Web of Science ®Google Scholar
• Assarzadeh, S.; Ghoreishi, M. Electro-Thermal-Based Finite Element Simulation and Experimental Validation of Material Removal in Static Gap Single-Spark Die-Sinking Electro-Discharge Machining Process. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2017, 231(1), 28–47. DOI: 10.1177/0954405415572661.
   Web of Science ®Google Scholar
• Spur, G.; Schönbeck, J. Anode Erosion in Wire-EDM – a Theoretical Model. CIRP Ann. 1993, 42(1), 253–256. DOI: 10.1016/S0007-8506(07)62437-8.
   Google Scholar
• Shahane, S.; Pande, S. S. Development of a Thermo-Physical Model for Multi-Spark Wire EDM Process. Procedia Manuf. 2016, 5, 205–219. DOI: 10.1016/j.promfg.2016.08.019.
   Google Scholar
• Durairaj, M.; Sudharsun, D.; Swamynathan, N. Analysis of Process Parameters in Wire EDM with Stainless Steel Using Single Objective Taguchi Method and Multi Objective Grey Relational Grade. Procedia Engg. 2013, 64, 868–877. DOI: 10.1016/j.proeng.2013.09.163.
   Google Scholar
• Patel, D. S.; Thalkar, M.; Jain, V. K.; Ramkumar, J. Electrochemical Micro-Texturing Using Microelectrodes Array Fabricated Through Wire-EDM on SS-304: Experiments and Simulation. Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), IIT Madras, Chennai, INDIA; 2017; pp 235–238.
   Google Scholar
• Debnath, T.; Patowari, P. K. Fabrication of an Array of Micro-Fins Using Wire-EDM and Its Parametric Analysis. Mater. Manuf. Process. 2019, 34(5), 580–589. DOI: 10.1080/10426914.2019.1566959.
   Web of Science ®Google Scholar
• Patel, M. R.; Barrufet, M. A.; Eubank, P. T.; DiBitonto, D. D. Theoretical Models of the Electrical Discharge Machining Process. II. The Anode Erosion Model. J. Appl. Phys. 1989, 66(9), 4104–4111. DOI: 10.1063/1.343995.
   Web of Science ®Google Scholar
• Kuriachen, B.; Somashekhar, K. P.; Mathew, J. Multiresponse Optimization of Micro-Wire Electrical Discharge Machining Process. Int. J. Adv. Manuf. Technol. 2015, 76(1), 91–104. DOI: 10.1007/s00170-014-6005-2.
   Web of Science ®Google Scholar
• Jasperson, B. A.; Jeon, Y.; Turner, K. T.; Pfefferkorn, F. E.; Qu, W. Comparison of Micro-Pin-Fin and Microchannel Heat Sinks Considering Thermal-Hydraulic Performance and Manufacturability. IEEE Trans. Components Packag. Technol. 2010, 33(1), 148–160. DOI: 10.1109/TCAPT.2009.2023980.
   Google Scholar
• Maji, A.; Bhanja, D.; Patowari, P. K. Numerical Investigation on Heat Transfer Enhancement of Heat Sink Using Perforated Pin Fins with Inline and Staggered Arrangement. Appl. Therm. Eng. 2017, 125, 596–616. DOI: 10.1016/j.applthermaleng.2017.07.053.
   Web of Science ®Google Scholar
• El-Sheikh, H. A.; Gurimella, S. V. Enhancement of Air Jet Impingement Heat Transfer Using Pin-Fin Heat Sinks. IEEE Trans. Components Packag. Technol. 2000, 23(2), 300–308. DOI: 10.1109/6144.846768.
   Google Scholar
• Brignoni, L. A.; Garimella, S. V. Experimental Optimization of Confined Air Jet Impingement on a Pin Fin Heat Sink. IEEE Trans. Components Packag. Technol. 1999, 22(3), 399–404. DOI: 10.1109/6144.796542.
   Google Scholar
• Jiang, W.; Gong, J.; Chen, H.; Tu, S. T. The Effect of Filler Metal Thickness on Residual Stress and Creep for Stainless-Steel Plate–Fin Structure. Int. J. Press. Vessel. Pip. 2008, 85(8), 569–574. DOI: 10.1016/j.ijpvp.2008.02.007.
   Web of Science ®Google Scholar
• Pilligrin, J. C.; Asokan, P.; Jerald, J.; Kanagaraj, G.; Nilakantan, J. M.; Nielsen, I. Tool Speed and Polarity Effects in Micro-EDM Drilling of 316L Stainless Steel. Prod. Manuf. Res. 2017, 5(1), 99–117. DOI: 10.1080/21693277.2017.1357055.
   Google Scholar
• Silverman, D. E.; Chu, B.; Jacoby, B. E.; Samuel, J. Evaluation of Micro-Drilling Technologies for Metal-Injection-Molded 420 Stainless Steel. Mach. Sci. Technol. 2016, 20(3), 368–385. DOI: 10.1080/10910344.2016.1191025.
   Web of Science ®Google Scholar
• Marques, C.; Kelly, K. W. Fabrication and Performance of a Pin Fin Micro Heat Exchanger. J. Heat. Transfer. 2004, 126(3), 434–444. DOI: 10.1115/1.1731341.
   Web of Science ®Google Scholar
• Talla, G.; Gangopadhyay, S.; Kona, N. B. Experimental Investigation and Optimization During the Fabrication of Arrayed Structures Using Reverse EDM. Mater. Manuf. Process. 2017, 32(9), 958–969. DOI: 10.1080/10426914.2016.1221085.
   Web of Science ®Google Scholar
• Zahiruddin, M.; Kunieda, M. Analysis of Micro Fin Deformation Due to Micro EDM. Procedia CIRP. 2016, 42, 569–574. DOI: 10.1016/j.procir.2016.02.253.
   Google Scholar
• Mastud, S. A.; Garg, M.; Singh, R.; Joshi, S. S. Recent Developments in the Reverse Micro-Electrical Discharge Machining in the Fabrication of Arrayed Micro-Features. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 2012, 226(2), 367–384. DOI: 10.1177/0954406211424672.
   Google Scholar
• Singh, A. K.; Patowari, K. P.; Deshpande, N. V. Experimental Analysis of Reverse Micro-EDM for Machining Microtool. Mater. Manuf. Process. 2016, 31(4), 530–540. DOI: 10.1080/10426914.2015.1070426.
   Web of Science ®Google Scholar
• Singh, A. K.; Patowari, P. K.; Deshpande, N. V. Effect of Tool Wear on Microrods Fabrication Using Reverse Μedm. Mater. Manuf. Process. 2017, 32(3), 286–293. DOI: 10.1080/10426914.2016.1198015.
   Web of Science ®Google Scholar
• Ho, K. H.; Newman, S. T.; Rahimifard, S.; Allen, R. D. State of the Art in Wire Electrical Discharge Machining (WEDM). Int. J. Mach. Tools Manuf. 2004, 44(12), 1247–1259. DOI: 10.1016/j.ijmachtools.2004.04.017.
   Web of Science ®Google Scholar
• Kuruvila, N.; Ravindra, H. V. Parametric Influence and Optimization of Wire EDM of Hot Die Steel. Mach. Sci. Technol. 2011, 15(1), 47–75. DOI: 10.1080/10910344.2011.557966.
   Web of Science ®Google Scholar
• Bobbili, R.; Madhu, V.; Gogia, A. K. Effect of Wire-EDM Machining Parameters on Surface Roughness and Material Removal Rate of High Strength Armor Steel. Mater. Manuf. Process. 2013, 28(4), 364–368. DOI: 10.1080/10426914.2012.736661.
   Web of Science ®Google Scholar
• Kumar, A.; Maheshwari, S.; Sharma, C.; Beri, N. A Study of Multiobjective Parametric Optimization of Silicon Abrasive Mixed Electrical Discharge Machining of Tool Steel. Mater. Manuf. Process. 2010, 25(10), 1041–1047. DOI: 10.1080/10426910903447303.
   Web of Science ®Google Scholar
• Li, Z.; Liu, Y.; Li, W.; Cao, B.; Dai, Y. Modeling of Two-Scale Array Microstructure and Prediction of Apparent Contact Angle Based on WEDM. Int. J. Adv. Manuf. Technol. 2022, 121(3), 2699–2719. DOI: 10.1007/s00170-022-09512-6.
   Google Scholar
• Bisaria, H.; Shandilya, P. Study on Crater Depth During Material Removal in WEDC of Ni-Rich Nickel–Titanium Shape Memory Alloy. J. Braz. Soc. Mech. Sci. Eng. 2019, 41(3), 157. DOI: 10.1007/s40430-019-1655-5.
   Web of Science ®Google Scholar
• Ikai, T.; Hashigushi, K. Heat Input for Crater Formation in EDM. Proceedings of the International Symposium for Electro-Machining-ISEM XI, EPFL, Switzerland; 1995; pp 163–170.
   Google Scholar
• Rebelo, J. C.; Morão Dias, A.; Mesquita, R.; Vassalo, P.; Santos, M. An Experimental Study on Electro-Discharge Machining and Polishing of High Strength Copper–Beryllium Alloys. J. Mater. Process. Technol. 2000, 103(3), 389–397. DOI: 10.1016/S0924-0136(99)00492-6.
   Web of Science ®Google Scholar
• Das, S.; Joshi, S. S. Modeling of Spark Erosion Rate in Microwire-EDM. Int. J. Adv. Manuf. Technol. 2010, 48(5), 581–596. DOI: 10.1007/s00170-009-2315-1.
   Web of Science ®Google Scholar