- Borm , P.J.A. and Donaldson , K. 1999 . The Quartz Hazard in the Construc-tion Industry . Indoor Built Environ , 8 : 107 – 1 . 12
- American Conference of Governmental Industrial Hygienists . 2002 . TLVs and BEIs Threshold Limit Values for Chemical Sub-stances and Physical Agents and Biological Exposure Indices , Cincinnati, OH : ACGIII . 2002
- National Institute of Occupational Safety and Health . 2001 . NIOSH Pocket Guide to Chemical Hazards and Other Databases , NIOSH Cincinnati, OH : NIOSH Publication 2001-145 .
- Occupational Safety and Health Administration . 1999 . Code of Federal Regulations Part 29 CFR 1910.1000 Table Z-3. U.S , Washington, DC : Government Printing Office .
- Linch , K.D. , Miller , W.E. , Althouse , R.B. , Groce , D. and Hale , J. 1998 . Surveillance of Respirable Crystalline Silica Dust Exposure Using OSHA Compliance Data (1979-1995) . Am J Indus Med , 34 : 547 – 558 .
- Lofgren , DJ. 1993 . Silica Exposure for Concrete Workers and Masons . Appl Occup Environ Hyg , 8 (10) : 832 – 836 .
- Galster , C. 1997 . A Significant Workplace Exposure to Crystalline Silica . Appl Occup Environ Hyg , 12 (8) : 522 – 523 .
- Chisolm , J. 1999 . Respirable Dust and Respirable Silica Concentra-tions from Construction Activities . Indoor Built Environ , 8 : 94 – 106 .
- Urban , E.C.J. 1939 . Ventilation in the Granite Industry . J Indus Hyg Tox , 21 (3) : 57 – 66 .
- Olander , L. and Krantz , S. 1976 . A Method of Evaluating the Capture Effi-ciency of a Local Exhaust System , Stockholm : National Board of Occupational Safety and Health, Scientific Publication Series Entitled Work and Health .
- Jansson , A. 1980 . Capture Efficiencies of Local Exhausts for Hand Grinding, Drilling and Welding . Staub-Reinhalt. Luft , March 3
- Tapola , M.H. 1988 . “ Test Method for Local Exhaust Hoods for Hand Tools ” . In Vent 88 , Edited by: Vincent , J.H. Oxford, , England : Pergamon Press .
- NIOSH . 1975 . Ventilation Requirements for Grinding, Buffing, and Pol-ishing Operations , Research Report HEW Publication Number (NIOSH) 75-107 Cincinnati, OH : NIOSH .
- Heitbrink , W.A. 2000 . In-Depth Study Report: Control Technology for Crystalline Silica Exposures in Construction: Exposures and Pre-liminary Control Evaluation , Report # ECTB NO 247-12 Cincinnati, OH : NIOSH .
- Heitbrink , W.A. 2000 . In-Depth Study Report: Control Technology for Crystalline Silica Exposures in Construction: Exposures and Pre-liminary Control Evaluation at a Restoration Preservation Masonry Construction Site , Report # ECTB NO 247-14 Cincinnati, OH : NIOSH .
- Croteau , G. 2000 . The Effects of Local Exhaust Ventilation Controls on Dust Exposures During Masonry Activities , Seattle, WA : University of Washington . Master's thesis
- Nash , N.T. and Williams , D.R. 2000 . Occupational Exposure to Crystalline Silica During Tuckpointing and the Use of Engineering Controls . Appl Occup Environ Hyg , 15 (1) : 8 – 10 .
- Gressel , M.G. , Echt , A.S. , Almaguer , D. and Gunderson , L. 1999 . Con-trol Technology and Exposure Assessment for Occupational Exposure to Crystalline Silica: Case 23-Masonry Tuck-Pointing , NIOSH Report No. ECTB 233-123c Cincinnati, OH : NIOSH .
- Heitbrink , W.A. and Watkins , D. 2001 . In-Depth Study Report: Control Technology for Crystalline Silica Exposures in Construction: The Effect of Exhaust Flow Rate Upon the Respirable Dust Emissions for Tuck Pointing Operations and a Preliminary Evaluation of a Ventilated Tool for Brick Cutting , Report # EPHB NO 247-18 Cincinnati, OH : NIOSH .
- NIOSH . 1998 . Environmental Surveillance Report Baker Concrete Construction , Cincinnati, OH : NIOSH .
- Gressel , M.G. , Echt , A.S. , Almaguer , D. and Gunderson , L. 1999 . Con-trol Technology and Exposure Assessment for Occupational Ex-posure to Crystalline Silica: Case 04-A Concrete Finishing Op-eration , NIOSH Report No. ECTB 233-104c Cincinnati, OH : NIOSH .
- Akbar-Khanzadeh , F. and Brillhart , R.L. 2002 . Respirable Crystalline Sil-ica Dust Exposure During Concrete Finishing (Grinding) Using Hand-Held Grinders in the Construction Industry . Ann Occup Hyg , 46 (3) : 341 – 346 .
- Flanagan , M.E. Surface Grinding Dust Control Evaluation . Downloaded from website , http://depts.washington.edu/cnstsafe/ cnst_research.htm on 3/28/01
- Thorpe , A. , Ritchie , A.S. , Gibson , M.J. and Brown , R.C. 1999 . Measure-ments of the Effectiveness of Dust Control on Cut-Off Saws Used in the Construction Industry . Ann Occup Hyg , 43 (7) : 443 – 456 .
- Flanagan , M.E. Masonry Saw Ventilation Evaluation for Jobsite Concrete Cutting . Downloaded from website , http:// depts.Washington.edu/cnstsafe/cnst_research.htm on 3/28/01
- Flanagan , M.E. 2001 . Wet Concrete Saw Cutting Inside-How Much Water Is Enough . AIHACE Abstracts New Orleans , June
- Gressel , M.G. , Echt , A.S. , Almaguer , D. , Cleary , J.N. and Gunderson , L. 1999 . Control Technology and Exposure Assessment for Occupa-tional Exposure to Crystalline Silica: Case 15-Concrete Cut-ting , NIOSH Report No. ECTB 233-115c Cincinnati, OH : NIOSH .
- Gressel , M.G. , Echt , A.S. , Almaguer , D. , Cleary , J.N. and Gunderson , L. 1999 . Control Technology and Exposure Assessment for Occupa-tional Exposure to Crystalline Silica: Case 16-Wet Cutting of Concrete Masonry Units , NIOSH Report No. ECTB 233-116c Cincinnati, OH : NIOSH .
- Gressel , M.G. , Echt , A.S. , Almaguer , D. , Cleary , J.N. and Gunderson , L. 1999 . Control Technology and Exposure Assessment for Occupa-tional Exposure to Crystalline Silica: Case 17-Dry Cutting of Concrete Masonry Units , NIOSH Report No. ECTB 233-117c Cincinnati, OH : NIOSH .
- Gressel , M.G. , Echt , A.S. , Almaguer , D. , Cleary , J.N. and Gunderson , L. 1999 . Control Technology and Exposure Assessment for Occupa-tional Exposure to Crystalline Silica: Case 18-Cutting Brick and Concrete Masonry Units , NIOSH Report No. ECTB 233-118c Cincinnati, OH : NIOSH .
- Gressel , M.G. , Echt , A.S. , Almaguer , D. and Gunderson , L. 1999 . Con-trol Technology and Exposure Assessment for Occupational Expo-sure to Crystalline Silica: Case 22-Rock Drilling , NIOSH Report No. ECTB 233-122c Cincinnati, OH : NIOSH .
- Flanagan , M.E. Green River Bridge Project Silica Exposure As-sessment . Downloaded from website , http://depts.washington.edu/ cnstsafe/cnst.research.htm on 3/28/01
- Tsuji , K. and Fukuhara , I. 2000 . Protection of Breathing Zone by Uniform Velocity Blowing . I. AIHA J , 61 : 568 – 574 .
- Bulte , N. , Woskie , S. and Greenspan , C. 1999 . Exposure Characterization for Highway Construction Part I: Cut and Cover Tunnel Finnish Stages . Appl Occup Environ Hyg , 14 (9) : 632 – 641 .
- Riala , R. 1988 . Dust and Quartz Exposure of Finnish Construction Site Cleaners . Ann Occup Hyg , 32 (2) : 215 – 220 .
- Lehtinen , J.H. , Koski , H. and Enbom , S. 1996 . Use of a Central Vacuum System at a Renovation Site Technical Research Center of Finland (VTT) , Espoo .
Engineering Controls for Selected Silica and Dust Exposures in the Construction Industry -- A Review
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.