References
- Babayn , E. Experimental evaluation of toxicity of 3(5) methylpyrazol (MP)
- Smith , P. A. Conjugation of 7-oxodehydroabietic acid to lysine: a non radical haptenation mechanism
- Babayan , E. A. and Hovhannesian , R. Experimental evaluation of toxicity of oxphosphonate (OPH) aerosol
- Claycamp , H. G. Artificial neural networks for quantitative risk assessment and hazard identification
- Lee , J. H. Skin cleaning with kerosene facilitates passage carcinogens to the lungs of animals treated with used gasoline engine oil
- Ertell , K. B. Determining the need for medical surveillance among former workers at a US department of energy site: methods and results
- Ertell , K. B. and Barnhart , S. A. Challenges and opportunities in delivering medical surveillance to former workers at U.S. department of energy nuclear sites
- Mirbod , S. M. A 4-year follow-up study on hand-arm vibration syndrome among grinders
- Breysse , P. N. Comparison of NIOSH method 7400 A and B counting rules for assessing synthetic vitreous fiber exposures
- Case , T. A study of worker exposures during the removal of manmade vitreous fiber (MMVF) insulation products
- Maxim , L. D. Estimation and use of respirator response functions (RRFs) in industrial hygiene studies
- Tsai , P. J. A comparison study on the aspiration efficiency of aerosol samplers by using the static mannequin sampling method
- Logan , P. W. Near real-time ambient air monitoring in chemical plant using extractive FTIR
- Hashmonay , R. A. Multi-beam segmentation strategy: A new beam geometry for open-path fourier transformed (OP-FTIR) exposure assessment in workplace
- Baether , W. The measurement of benzene in air with an advanced measurement system
- Gardner , C. The development and validation of an improved air monitor for several community used diisocyanates
- Tsai , S.-W. Validation of passive sampler for aldehydes
- Martos , P. A. Determination of formaldehyde using solid phase microextration for both instantaneous and time-weighed average sampling
- Wu , L. Evaluate a passive sampling and thermal desorption method for toluene vapor
- Zhao , Y. Stability of methylene chloride spiked passive samplers: An international shipping and transportation study
- Towers , T. A. and Page , N. OSHA guidelines for hazard determination
- Dumschat , C. Answering key OSH questions via the web: a new approach
- Zey , J. N. Development of training modules for the NIOSH small business train-the-trainer program
- Stricoff , R. S. Behavior-based methods applied to industrial hygiene
- Crawford , T. A. Gauging the effectiveness of risk communication at a highly publicized facility handling extremely hazardous chemicals
- Whaley , D. Effect of incorporating occupational reproductive guidelines into scores for 200 superfund chemicals, using purdue chemical hazard score
- Nelson , D. The effect of water availability on the risk perception of wastewater reuse
- Morgan , D. A. Electronic information resources created through productive partnerships and continuous improvement
- Lippy , B. E. Anticipating risk to workers from environmental remediation technologies: Data from a unique partnership of government, labor, and technology developers
- Durand , K. T.H. An investigation of interstitial lung disease at a nylon flocking plant: A failed attempt at partnership
- Burrill , S. M. A novel approach to integrating industrial hygiene and incident prevention
- Dotson , K. Development of a common international safety and health management system for corporate mining operations
- Lew , V. Doing work safely
- Owens , T. ISO 14001—What's it all about?
- Petrick , M. Implementation of an ISO 14001 environmental management system at a large computer manufacturing and development facility
- Adera , T. Trend analysis: an approach to evaluating hearing loss prevention programs
- Royster , J. Off-the-job noise exposures and their influence on the hearing of employees in hearing conservation programs
- Toppila , E. A model for individual noise-induced hearing loss
- Adera , T. and Amir , C. Use of comparison populations for evaluating the effectiveness of hearing loss prevention programs
- Anderson , L. Are short-term workers at increased risk for hearing loss?
- Moss , C. E. Evaluation of occupational exposure to EMF from walk-through metal detectors
- Akbar-Khanzadeh , F. Exposures of teachers, maintenance and clerical workers in a Canadian school district to extremely low frequency magnetic fields
- Starck , J. Individual risk factors in the development of noise-induced hearing loss; the application of database and expert program noisescan
- Arnold , S. F. Lessons learned in exposure modeling for quantitative health risk assessment and risk management: one individual's experiences
- Cohen , M. A. Observational exposure assessment: a modeling study of the amount of data required to estimate underlying distribution
- Tankersley , W. G. Potential exposure-based worker classification system
- Hewett , P. Controlling exposure profiles: Critique of current practice
- Stull , J. O. Using U.S., European, and international standards to specify protective gloves for industrial applications
- Carroll , T. R. ‘REC’—A practical approach to selecting the optimum protective garment
- Krawczyk , S. Ergonomics assessment and improvement as “Toyota Production System” is implemented at an aluminum can sheet stock production facility
- Malone , G. The association between upper extremity work patterns and psychophysical discomfort
- Bernard , T. E. Moving heat stress instrumentation into the 21st century
- Zalk , D. M. Grassroots ergonomics
- Spadacene , N. W. Empowering employees to recognize ergonomic risks associated with their tasks
- Groover , D. R. Reduction of ergonomic exposure in an office environment
- Swoboda , C. R. How to create an injury-free work environment in the office area
- Kraft , E. M. Divisions affected by high incident and lost workday incident rates of sprains/strains at a public university and correlation with job tasks and psychosocial factors
- Lillquist , D. R. A comparison of environmental sample methods for estimation of soil lead at trap shooting ranges: the effects of pellet and non pellet lead
- Stanion , C. V. Lead contamination in contemporary ceramics studios: Potential for community and worker exposure
- Vincent , J. H. Occupational health standards and the role of the occupational hygiene specialist: an outsider's view of the Russian experience
- Waters , M. A. Occupational hygiene in Vietnam: Challenges and opportunities
- Jensen , P. A. Engineering control to prevent the spread of tuberculosis among health care workers in Thailand
- Willeke , K. New method for sampling airborne dust and microorganisms by the combined action of liquid impingement and centrifugation
- Tsai , S. M.-C. Comparative studies of fungal media for the recovery of stach botrys chartarum from environmental samples
- Johnson , D. L. The effect of phosphate buffer on aerosol size distribution of nebulized gram-positive and gram-negative bioaerosols
- Boothe , G. D. Ensuring accuracy in indoor air quality investigations involving microbial contamination: How to interpret air sampling data
- Hines , C. J. Endotoxin and 3-Hydroxy fatty acid analysis of air and dust samples from an office building
- Salazar , R. R. Ochratoxin a production by aspergillus ochraceus growing on ceiling tile and carpet
- Reynolds , S. J. International interlaboratory comparison of endotoxin assays using agricultural dusts
- Bartlett , K. H. An evaluation of bio-aerosol particulate in elementary school classrooms
- Lenhart , S. W. Removal of 60 tons of manure from a building: Protecting workers at risk
- Jones , M. L. Current assessment of hazards facing children on Iowa farm operations today
- Krake , A. M. Nicotine as a fumigant: Exposures among research greenhouse employees
- Jones , M. L. and Reynolds , S. Assessment of high hazard-low frequency activities conducted on Iowa farm operations
- Kangas , J. A. Effect of In SITU composting on malodorous gases in swine confinement buildings
- Berberet , L. J. Respirable dust and crystalline silica (quartz) exposure resulting from potato harvesting operations
- Ahn , K. Problems encountered in the operation and use of laboratory fume hoods at a large research university
- Weeks , B. L. New trends in laboratory design and the impact on maintaining compliance with NFPA and BOCA requirements
- Shiozaki , D. J. Development and implementation of a comprehensive laboratory safety program in a cancer research center
- Prosch , S. A. Improving chemical laboratory safety in an academic institution utilizing inventory
- Grayson , R. Laboratory waste: Bulking hazards and development of standard operating procedures
- Grice , K. Lead exposure action plan for remote field personnel
- Johnson , L. Infant lead exposure in a residential setting
- England , E. Worker exposure during use of a chromate free aircraft primer (tie coat)
- Beck , E. Health risk evaluation of an exothermic welding process
- Zoubeck , P. A. Solvents and dermal exposure
- Errede , D. Investigation of and response to respirator complaints in an insect-rearing laboratory
- McGinley , M. Abatement of odor/irritant infiltration from restaurants and micro brewery
- Smith , E. Hazards of the microbrewing industry
- Walters , M. Practical methods for measuring ventilation rate using carbon dioxide (CO2)
- Hays , S. Solving a serious indoor air quality problem with electron microscopy analysis
- Hollander , J. Ergonomics job analysis of plutonium casting
- James , T. Increasing computer workstation comfort through simple modification
- Martinez , A. Component analyses of grain dusts that contribute to occupational lung injury
- Bliss , T. Residual pesticides in housing and bedding at migrant labor camps in Northwestern Ohio
- Rando , R. An investigation of a sulfide hazard in the production of yellow mustard
- Horner , W. Mold biosensor: An additional technique of building investigation
- Horan , T. A two-stage program for conducting indoor air quality assessments
- Zimmer , A. T. Thermodynamic equilibrium calculations as an occupational assessment tool: Welding alloy examples
- Carlton , G. N. Particle size distributions of sanding particulates during U.S. Air Force corrosion control operations
- Guillemin , M. P. Challenges in the assessment of occupational exposure to diesel soot
- Smolik , E. Urinary 1-hydroxypyrene concentration as a biological marker of the occupational exposure to PAHs in coke plant
- Roh , J. H. Evaluation of dermal measurement for workers in benzidine manufacturing factory
- England , E. C. Reducing chromate exposures during the depainting and priming of fighter aircraft