REFERENCES
- Sherman, L.M. “Clean-air rules challenge processors,” Plastics Technol. 1995, 41, 2, 83-86.
- Barlow, A.; Contos, D.; Holdren, M.; Garrison, P.; Harris, L.; Janke, B. “Development of emission factors for polyethylene processing,” J. Air & Waste Manage. Assoc. 1996, 46, 569–580.
- Battelle Final Report to the Society of the Plastics Industry, “Sampling and analysis of emissions evolved during thermal processing of ethylene-vinyl acetate and ethylene methyl acrylate resin composites,” March 1995.
- Hoff, A.; Jacobson, S. “Thermal oxidation of polypropylene close to industrial processing conditions,” J. Applied Polym. Sci. 1982, 27, 2,539.
- Patel, S.H.; Xanthos, M. “Volatile emissions during thermoplastics processing—A Review,” Advances in Polym. Technol. 1995, 14, 67.
- Hoff, A.; Jacobsson, S. “Thermo-oxidative degradation of low density polyethylene close to industrial processing conditions,” J. Applied Polym. Sci. 1981, 26, 3,409–3,423.
- Hughes, T.W.; Boland, R.F.; Rinaldi, G.M. Source Assessment: Plastic Processing, State of the Art. Monsanto Research Corporation. March 1978, EPA-600/2-78/004C, 27–28.
- “Air facility subsystem source classification codes and emission factor listing for criteria air pollutants,” EPA, March 1990, EPA 450/490/003.
- Compendium of Methods For The Determination of Toxic Organic Compounds in Ambient Air, U.S. Environmental Protection Agency, June 1988. Available from NTIS as PB90–127374.
- Fed. Regist. 1994, 59, 189, 49,877.
- Forrest, M.J.; Jolly, A.M.; Holding, S.R.; Richards, S.J. “Emissions from processing thermoplastics,” Annals of Occupational Hygiene. 1995, 39, 1, 35–53.
- Battelle Final Report to the Society of the Plastics Industry, “Sampling and analysis of emissions during thermal processing of polypropylene resin mixtures,” April 1995.