REFERENCES
- Bostick, W.D.; Hoffman, D.P.; Stevenson, R.J.; Richmond, A.; Bickford, D.F. “Surrogate Formulations for Thermal Treatment of Low-Level Mixed Waste: Part IV - Waste Water Treatment Sludges,” U.S. DOE/ MWIP-18, Oak Ridge, TN, 1994.
- Overcamp, T.J.; Hewlett, K.J.; Bennert, D.M.; Harden, J.M.; Resce, J.L. “Vitrification Demonstration of Surrogate West End Treatment Facility Mixed-Waste Sludge,” Clemson University, Report to the Westinghouse Savannah River Company, CU/ESE/VRL-96-001, 1996.
- Overcamp, T.J.; Wilson, R.A.; Harden, J.M. “Vitrification Demonstration of Surrogate Rocky Flats Precipitate Mixed-Waste Sludge,” Clemson University, Report to the Westinghouse Savannah River Company, CU/ESE/VRL-97-002, 1997.
- Overcamp, T.J.; Harden, J.M. “Vitrification Demonstration of Surrogate Los Alamos National Laboratory TA-50 Mixed-Waste Sludge,” Clemson University, Report to the Westinghouse Savannah River Company, CU/ESE/VRL-97-001, 1997.
- U.S. EPA, “Glass manufacturing,” Compilation of Air Pollution Emission Factors, v. I, Stationary Point and Area Sources; chap. 11.15, 1996.
- U.S. EPA, “Glass fiber manufacturing,” Compilation of Air Pollution Emission Factors, v. I, Stationary Point and Area Sources; chap. 11.13, 1996.
- Teller, A.J.; Hseih, J.Y. “Glass manufacturing,” Air Pollution Engineering Manual; Buonicore, A.J., and. Davis, W.T., Eds.; Van Nostrand Reinhold: New York, NY, 1992, 770–777.
- Teller, A.J. “Control of glass furnace emissions,” Glass Industry 1976, 57, 12–22.
- Matlack, K.S.; Muller, I.S.; Hojaji, H.; Mohr, R.K.; Brandys, M.; Wang, E.; Pegg, I.L.; Macedo, P.B. “Vitrification of actual mixed wastes in a new high-temperature melter,” Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries II; Jain, V. and Peeler, D., Eds.; American Ceramic Society: Westerville, OH, 1996,pp. 11–18.
- Fu, S.S.; Matlack, K.S.; Mohr, R.K.; Luo, W.; Wang, E.; Leontiev, M.;Hojaji, H.; Brandys, M.; Wang, E.; Pegg, I.L.; Macedo, P.B. “Minimelter runs of mixed wastes high in lead, barium, phosphorous, and sulfur,” Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries II; Jain, V., and Peeler, D., Eds.; American Ceramic Society: Westerville, OH, 1996, pp. 27–40.
- Overcamp, T.J.; Harden, J.M.; Cicero, C.A.; Bickford, D.F. “Offgas emission from slurry-fed, joule-heated vitrification systems,” Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries II; Jain, V., and Peeler, D., Eds.; American Ceramic Society: Westerville, OH, 1996, pp. 261–269.
- U.S. EPA. “Standards of performance for new stationary sources national emission standards for hazardous air pollution: Addition of Method 29 to Appendix A of Part 60 and Amendments to Method 101A of Appendix B of Part 61,” Fed. Regist. 1996, 61 (81), 18,26018,281.