204
Views
6
CrossRef citations to date
0
Altmetric
Technical Paper

PM Emissions Emanating from Limited-Access Highways

&
Pages 85-94 | Published online: 27 Dec 2011

REFERENCES

  • Pierson, W.R.; Brachaczek, W.W. “PM associated with vehicles on the road, II,” Aerosol Sci. Technol. 1983, 2, 1–40.
  • Weingartner, D.N.; Keler, C.; Stahel, W.A.; Baltensperger, U.; Burtscher, H.J., J. Aerosol Sci. 1995, 26, S669–S670.
  • Gertler, A.W.; Wittorff, D.N.; Zielinska, B.; Chow, J.C. “Determination of mobile source particulate emission factors in tunnels,” In PM: Health and Regulatory Issues; Air & Waste Management Association: Pittsburgh, PA, 1995: pp 608–622.
  • Rogak, S.N.; Pott, U.; Campbell, I.; Nejedly, Z. “Fine particle emissions from heavy-duty vehicles in Vancouver, BC,” Presented at the 90th Annual Meeting of the Air & Waste Management Association, Toronto, Ontario, Canada, June 1997; paper 97-WP96.02.
  • Gilles, J.A.; Gertler, A.W.; Sagebiel, J.C.; Dippel, W.A. “On-road PMZ5 and PM10 emissions in the Sepulveda Tunnel, Los Angeles, California,” Presented at the A&WMA Specialty Conference PM25 A Fine Particle Standard; Air & Waste Management Association: Long Beach, CA, January 1998.
  • Cowherd, C. Jr.; Englehart, P.J. “Paved road dust particulate emissions source category report”; Prepared for the U.S. Environmental Protection Agency by Midwest Research Institute: Kansas City, MO, 1984; EPA-600/7-84–077.
  • Kitsa, V.; Lioy, P.J. “Near field dispersion of mechanically resus-pended dust from an unpaved road,” In Transactions: PMW Standards and Nontraditional Particulate Source Controls; Chow, J.C., Ono, D., Eds.; Air & Waste Management Association: Pittsburgh, PA, 1992; pp 382–398.
  • Muleski, G.E.; Stevens, K. “PM10 emissions from public unpaved roads in rural Arizona,” In Transactions: PMW Standards and Nontraditional Particulate Source Controls; Chow, J.C., Ono, D., Eds.; Air & Waste Management Association: Pittsburgh, PA, 1992; pp 324–334.
  • Zimmer, R.A.; Reeser, W.K.; Cummins, P. “Evaluation of PM10 emission factors for paved streets,” In Transactions: PMW Standards andNontradi-tional Particulate Source Controls; Chow, J.C., Ono, D., Eds.; Air & Waste Management Association: Pittsburgh, PA, 1992; pp 311–323.
  • Midwest Research Institute. “Emission Factor Documentation for AP-42, Section 13.2.1: Paved Roads”; Prepared for the U.S. Environmental Protection Agency by Midwest Research Institute: Kansas City, MO, 1993; MRI Project 9712–44.
  • Claiborn, C.; Mitra, A.; Adams, G; Bamesberger, L; Allwine, G.; Kantamaneni, R.; Lamb,B; Westberg, H. “Evaluation of PM10 emission rates from paved and unpaved roads using tracer techniques,” Atmos. Environ. 1995, 29, 1075–1089.
  • Kantamaneni, R.; Adams, G.; Bamesberger, L.; Allwine, E.; Westberg, H.; Lamb, B.; Claiborn, C. “The measurement of roadway PM10 emission rates using atmospheric tracer ratio techniques,” Atmos. Environ. 1996, 30, 4209–4223.
  • Watson, J.G.; Chow, J.C.; Gillies, J.A.; Moosmueller, H.; Rogers, C.F.; DuBois, D.; Derby, J. “Effectiveness Demonstration of Fugitive Dust Control Methods for Public Unpaved Roads and Unpaved Shoulders on Paved Roads”; Prepared for California Regional Particulate Air Quality Study by Desert Research Institute: Reno, NV, 1996; DRI Document 685-5200.1F1.
  • Midwest Research Institute. “Addendum to Emission Factor Documentation for AP-42, Section 11.2.5 and 11.2.6 (Now 13.2.1): Paved Roads”; Prepared for the U.S. Environmental Protection Agency by Midwest Research Institute: Kansas City, MO, 1997; MRI Project 4604–02.
  • Cowherd, C.; Kuykendal, W.B. “Fine Particle Components of PM-10 from Fugitive Dust Sources,” Presented at the 90th Annual Meeting of the Air & Waste Management Association, Toronto, Ontario, Canada, June 1997; paper 97-WP96.04.
  • Lamoree, D.P. M.S. Thesis, environmental engineering program, Washington University, St. Louis, MO, 1999.
  • Chow, J.C. “Critical Review: measurement methods to determine compliance with ambient air quality standards for suspended particles,” J. Air & Waste Manage. Assoc. 1995, 45, 320–382.
  • Pleasant, M. “Philadelphia Diesel Particulate Monitoring Study”; Prepared for the U.S. Environmental Protection Agency by ManTech Environmental Technology, Inc.: Research Triangle Park, NC, 1994; ManTech Document SP-4420-94–09.
  • Tropp, R.J.; Jones, K.; Kuhn, G; Berg, N.J., Jr. “Comparison of PM2.5 saturation samplers with prototype PM2.5 Federal Reference Method samplers”; Presented at the A&WMA Specialty Conference PM2.5: A Fine Particle Standard; Air & Waste Management Association, Long Beach, CA, January 1998.
  • U.S. Environmental Protection Agency. Draft User's Guide to PART5: A Program for Calculating Particle Emissions from Motor Vehicles; U.S. Environmental Protection Agency: Ann Arbor, MI, 1995; EPA-AA- AQAB–92–2.
  • Benson, P.E. CALINE4-A Dispersion Model for Predicting Air Pollutant Concentrations Near Roadways; Federal Highway Administration, U.S. Department of Transportation: Washington, DC, 1984; FHWA/CA/ TL–84/15.
  • Benson, P.E. “A review of the development and application of the CALINE3 and CALINE4 models,” Atmos. Environ. 1992, 265, 379–390.
  • U.S. Environmental Protection Agency. “Section 13.2.1: Paved Roads,” Compilation of Air Pollutant Emission Factors; Document #AP-42, Supplement D to the fifth edition, U.S. Environmental Protection Agency: Research Triangle Park, NC, 1997.
  • Maricq, M.; Podsiadlik, D.; Chase, R.E. “Beyond mass emissions: an examination of the size-resolved and transient nature of particle emissions by motor vehicles,” Presented at the A&WMA Specialty Conference PM2.5: A Fine Particle Standard; Air & Waste Management Association, Long Beach, CA, January 1998.
  • Cadle, S.H.; Mulawa, P.; Ragazzi, R.A.; Barrett, R.; Lawson, D.R.; Knapp, K.T.; Snow, R. “Light-duty vehicle exhaust PM measurements in the Denver, CO area,” Presented at the A&WMA Specialty Conference PM2.5: A Fine Particle Standard; Air & Waste Management Association, Long Beach, CA, January 1998.
  • Singh, R.B.; Colls, J. “Development of particulate emission factors and size distributions for European motor vehicles,” Presented at the 90th Annual Meeting of the Air & Waste Management Association, Toronto, Ontario, Canada, June 1997; paper 97-WP96.01.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.