REFERENCES
- Wu, C.H.; Chang, C.Y.; Hor, J.L. “On the thermal treatment of plastic mixtures in MSW: pyrolysis kinetics,” Waste Manage. 1993, 13, 221235.
- Seymour, R.B. Engineering Polymer Sourcebook; McGraw-Hill: New York, 1990.
- Chung, S.L.; Lai, N.L. “Suppression of soot by metal additives during the combustion of polystyrene,” J. Air & Waste Manage. Assoc. 1992, 42, 1082–1088.
- Mayer, A. Particle Size Distribution Downstream of Traps of Different Design; SAE Paper No. 950372; Society of Automotive Engineers: Warrendale, PA, 1995.
- Eller, R. “Solid waste management in Japan,” Waste Age 1992, 23, 5364.
- Flagan, R.C.; Seinfeld, J.H. Fundamentals of Air Pollution Engineering; Prentice-Hall: Englewood Cliffs, NJ, 1998.
- Panagiotou, T.; Levendis, Y.A. “A study on the combustion characteristics of PVC, poly(styrene), poly(ethylene) and poly(propylene) particles under high heating rates,” Combustion and Flame 1994a, 99(4), 53–74.
- Panagiotou, T.; Levendis, Y.A.; Delichiatsios, M. “Combustion behavior of poly(styrene) particles of various degrees of crosslinking and styrene monomer droplets,” Combust. Sci. & Tech. 1994b, 103(1-6), 6384.
- Panagiotou, T.; Levendis, Y.A. “Combustion of pulverized PVC and poly(ethylene),” Combust. Sci. & Tech. 1996a, 112, 117–140.
- Panagiotou, T.; Levendis, Y.A. “Observations on the combustion of polymers (plastics): from single particles to groups of particles,” Combust. Sci. & Tech. 1998, 137, (1–6), 121–148.
- Wheatley, L.; Levendis, Y.A.; Vouros, P. “An exploratory study on the combustion and PAH emissions of selected municipal waste plastics,” Environ. Sci. & Tech. 1993, 27 (13), 2885–2895.
- Panagiotou, T.; Levendis, Y.A.; Carlson, J.; Dunayefskiy, Y.; Vouros, P. “Semi-volatile organic emissions from burning poly(styrene), poly(ethylene) and PVC particles at high temperatures,” Combust. Sci. & Tech. 1996b, 116-117 (1-6), 91–128.
- Panagiotou, T.; Levendis, Y.A.; Carlson, J.; Vouros, P. The Effect of Bulk Equivalence Ratio on the PAH Emissions from the Combustion of PVC, Poly(styrene) and Poly(ethylene). In Proceedings of Twenty-Sixth Symposium (International) on Combustion; The Combustion Institute: Pittsburgh, PA, 1996; pp 2421–2430.
- Courtemanche, B.; Levendis, Y.A. “A laboratory study on the NO, NO2, SO2, and CO emissions from the combustion of pulverized coal, municipal waste plastics and tires,” Fuel 1997, 77(3), 183–196.
- Coghlan, A. “Can burning plastics be good for the world? NewScientist 1994, 143, 20.
- Lea, W.R. “Plastic incineration versus recycling: a comparison of energy and landfill cost savings,” J. Hazard. Mater. 1996, 47, 295–302.
- “Combustion study shows no PVC link with toxicity,” Modern Plastics 1987, 64, 12–13.
- “Incinerator operator: vinyl is harmless,” Modern Plastics 1989, 66, 19–20.
- Glassman, I. Soot Formation in Combustion Processes. In Proceedings of Twenty-Second Symposium (International) on Combustion; The Combustion Institute, Pittsburgh, PA, 1982; pp 295–311.
- Chung, S.L.; Tsang, S.M. “Soot control during the combustion of polystyrene,” J. Air & Waste Manage. Assoc. 1991, 41(6), 821–826.
- Cumper, J.G.; Levendis, Y.A.; Metghalchi, M. Characterization of the Environment in a Laminar Flow Furnace with Applications to the Combustion of Coal and Coal-Water Slurries; Vol. 148; American Society of Mechanical Engineers Publication, Heat Transfer Division, 1998, pp 89–96.
- Atal, A.; Steciak, J.; Levendis, Y.A. “Combustion and SO2-NOx emissions of bituminous coal particles treated with CMA,” Fuel 1995, 74 (4), 495–506.
- Steciak, J.; Levendis, Y.A.; Wise, D.L.; Simons, G. “Dual SO2-NOx concentration reduction by calcium salts of carboxylic acids,” J. Environ. Eng. (N.Y) 1995, 121 (8), 595–604.
- Haynes, B.S. In Fossil Fuel Combustion — A Source Book; Bartok, W.A.; Sarofim, A.F., Eds.; John Wiley & Sons: New York, 1989.