Preparation and characterization of PZT thin films deposited on PZT buffer layer with different lead content

References

• A. Tommasi, G. Coletta, D. Balma, S. L. Marasso, D. Perrone, G. Canavese, S. Stassi, S. Bianco, M. Cocuzza, and C. F. Pirri, Process optimisation of a MEMS based PZT actuated microswitch, Microelectron. Eng. 119, 137–140 (2014).
   Web of Science ®Google Scholar
• R. Gupta, M. Tomar, A. Kumar, and V. Gupta, Performance of magnetoelectric PZT/Ni multiferroic system for energy harvesting application, Smart Mater. Struct. 26, 035002–035010 (2017).
   Web of Science ®Google Scholar
• A. Datta, D. Mukherjee, S. Witanachchi, and P. Mukherjee, Hierarchically Ordered Nano- Heterostructured PZT Thin Films with Enhanced Ferroelectric Properties, Adv. Funct. Mater. 24, 2638–2647 (2014).
   Web of Science ®Google Scholar
• K. Byung-Hun, L. Hwa-Sun, K. Sung-Wook, K. Piljoong, and P Yoon-Sok, Hydrodynamic responses of a piezoelectric driven MEMS inkjet print-head[J], Sens. Actuators, A. 210, 131–140 (2014).
   Google Scholar
• R. Thomas, S. Mochizuki, T. Mihara, and T. Ishida, Preparation of Pb(Zr,Ti)O3 thin films by RF-magnetron sputtering with single stoichiometric target: structural and electrical properties, Thin Solid Films. 413, 65–75 (2002).
   Web of Science ®Google Scholar
• M. Shimizu, M. Okaniwa, H. Fujisawa, and H. Niu, Crystalline and ferroelectric properties of Pb(Zr, Ti)O3 thin films grown by low-temperature metalorganic chemical vapor deposition, Jpn. J. Appl. Phys. Part 1. 41, 6686–6689 (2002).
   Web of Science ®Google Scholar
• Z. Wu, J. Zhu, and X. Liu, Improved fatigue property of hafnium substitute lead zirconate titanate deposited by pulse laser deposition, J. Mater. Sci. – Mater. Electron. 28, 1819–1823 (2017).
   Web of Science ®Google Scholar
• Z. Chen, C. T. Yang, B. Li, M. X. Sun, and B. C. Yang, Preferred orientation controlling of PZT (52–48) thin films prepared by sol-gel process, J. Cryst. Growth. 285, 627–632 (2005).
   Web of Science ®Google Scholar
• Z. Wu, J. Zhou, W. Chen, J. Shen, H. Yang, S. Zhang, and Y. Liu, Improvement in temperature dependence and dielectric tunability properties of PbZr0.52Ti0.48O3 thin films using Ba(Mg1/3Ta2/3)O3 buffer layer, Appl. Surf. Sci. 388, 579–583 (2016).
   Web of Science ®Google Scholar
• X. H. Du, J. H. Zheng, U. Belegundu, and K. Uchino, Crystal orientation dependence of piezoelectric properties of lead zirconate titanate near the morphotropic phase boundary, Appl. Phys. Let. 72, 2421–2423 (1998).
   Web of Science ®Google Scholar
• R. Guo, L. E. Cross, S. E. Park, B. Noheda, D. E. Cox, and G. Shirane, Origin of the high piezoelectric response in PbZr1-xTixO3, Phys. Rev. Lett. 84, 5423–5426 (2000).
   PubMed Web of Science ®Google Scholar
• M. Shimizu, M. Sugiyama, H. Fujisawa, and T. Shiosaki, Control of Orientation of Pb(Zr,Ti)O3 Thin Films Using PbTiO3 Buffer Layer, Jpn. J. Appl. Phys. Part 1 33, 5167–5171 (1994).
   Web of Science ®Google Scholar
• J. Zhong, V. Batra, H. Han, S. Kotru, and R. K. Pandey, Effect of Pb content and solution concentration of PbxTiO3 seed layer on {100}-texture and ferroelectric/dielectric behavior of PZT (52/48) thin films, J. Vac. Sci. Technol. A 33, 05E119 (2015).
   Web of Science ®Google Scholar
• W. Gong, J. F. Li, X. C. Chu, Z. L. Gui, and L. T. Li, Preparation and characterization of sol-gel derived (100)-textured Pb(Zr,Ti)O3 thin films: PbO seeding role in the formation of preferential orientation, Acta Mater. 52, 2787–2793 (2004).
   Web of Science ®Google Scholar
• R. Lei, Y. Ren, L. Qiao, H. Gu, Z. Yue, D. Xie, and J. Cao, Improving the fatigue endurance of lead zirconate titanate thin films through PbO interfacial modification, Rare Metals 30, 68–71 (2011).
   Web of Science ®Google Scholar
• M. S. Chen, T. B. Wu, and J. M. Wu, Effect of textured LaNiO3 electrode on the fatigue improvement of Pb(Zr0.53Ti0.47)O3 thin films, Appl. Phys. Let. 68, 1430–1432 (1996).
   Web of Science ®Google Scholar
• B. Wen, Y. Zhang, X. Liu, L. Ma, and X. Wang, Fatigue improvement in modified lead zirconate titanate ceramics through employment of La0.8Sr0.2MnO3 buffer layers, Ceram. Int. 39, 219–225 (2013).
   Web of Science ®Google Scholar
• H. Miyazaki, Y. Miwa, and H. Suzuki, Improvement in fatigue property for a PZT ferroelectric film device with SRO electrode film prepared by chemical solution deposition, Mater. Sci. Eng. B 136, 203–206 (2007).
   Google Scholar
• D. H. Li, E. S. Lee, H. W. Chung, and S. Y. Lee, Comparison of the effect of PLT and PZT buffer layers on PZT thin films for ferroelectric materials applications, Appl. Surf. Sci. 252, 4541–4544 (2006).
   Web of Science ®Google Scholar
• H. Paik, J. Hong, Y. A. Jeon, S. K. Kim, Y. Kim, Y. Kim, Y. S. Kim, and K. No, Orientation and fatigue improvement of PZT thin films on cubic textured CaRuO3 electrode, Int. Ferroelectr. 75, 115–121 (2005).
   Web of Science ®Google Scholar
• S. A. S. Rodrigues, J. P. B. Silva, A. Khodorov, J. Martin-Sanchez, M. Pereira, and M. J. M. Gomes, Improvement of the fatigue and the ferroelectric properties of PZT films through a LSCO seed layer, Mater. Sci. Eng. B 178, 1224–1229 (2013).
   Web of Science ®Google Scholar
• F. Yang, W. D. Fei, and Q. Sun, Highly (100)-textured Pb(Zr0.52Ti0.48)O3film derived from a modified sol-gel technique using inorganic zirconium precursor, J. Mater. Process. Technol. 209, 220–224 (2009).
   Google Scholar
• R. Poyato, M. L. Calzada, and L. Pardo, Effects of substrate annealing and post-crystallization thermal treatments on the functional properties of preferentially oriented (Pb,Ca)TiO3 thin films, J. Appl. Phys. 93, 4081–4090 (2003).
   Web of Science ®Google Scholar
• V. P. Afanas'ev, G. N. Mosina, A. A. Petrov, I. P. Pronin, L. M. Sorokin, and E. A. Tarakanov, Specific properties of the PZT-based thin-film capacitor structures with excess lead oxide, Tech. Phys. Let. 27, 467–469 (2001).
   Web of Science ®Google Scholar
• J. G. Wu, J. L. Zhu, D. Q. Xiao, J. G. Zhu, J. Z. Tan, and Q. L. Zhang, Preparation and properties of highly (100)-oriented Pb(Zr0.2Ti0.8)O3 thin film prepared by rf magnetron sputtering with a PbOx buffer layer, J. Appl. Phys. 101, 094107 (2007).
   Web of Science ®Google Scholar
• P. Kumar, P. Singh, S. Singh, J. K. Juneja, C. Prakash, and K. K. Raina, Influence of lanthanum substitution on dielectric properties of modified lead zirconate titanates, Ceram. Int. 41, 5177–5181 (2015).
   Google Scholar
• S. B. Narang, and D. Kaur, Dielectric Anomaly in La Modified Barium Titanates, Ferroelectr. Lett. 36, 20–27 (2009).
   Web of Science ®Google Scholar
• J. Zhu, X. Zhu, M. Jiang, X. Li, J. Zhu, and D. Xiao, Enhanced ferroelectric and dielectric properties of highly (100)-oriented 0.67Pb(Mg1/3Nb2/3)O3-0.33PbTiO3 thin films with a special Pb(Zr0.2,Ti0.8)O3/PbOx bilayered buffer layer, J. Appl. Phys. 104, 086104 (2008).
   Web of Science ®Google Scholar
• H. Sun, Y. Zhang, X. Liu, S. Guo, Y. Liu, and W. Chen, The effect of Mn/Nb doping on dielectric and ferroelectric properties of PZT thin films prepared by sol-gel process, J. Sol-Gel Sci. Technol. 74, 378–386 (2015).
   Web of Science ®Google Scholar
• K. Aoki, Y. Fukuda, K. Numata, and A. Nishimura, Dielectric Properties of (111) and (100) Lead-Zirconate-Titanate Films Prepared by Sol-Gel Technique, Jpn. J. Appl. Phys. Part 1 33, 5155–5158 (1994).
   Web of Science ®Google Scholar
• J. K. Yang, W. S. Kim, and H. H. Park, The investigation of Pb-sufficient buffer layer on the ferroelectric properties in Pt/PZT/Pt structure, Ferroelectr. 260, 611–616 (2001).
   Web of Science ®Google Scholar
• J. J. Lee, C. L. Thio, and S. B. Desu, Electrode contacts on ferroelectric Pb(Zrx,Ti1-x)O3 and SrBi2Ta2O9 thin films and their influence on fatigue properties, J. Appl. Phys. 78, 5073–5078 (1995).
   Web of Science ®Google Scholar