References
- P. Stefan et al., Highly efficient 400 W near-fundamental-mode green thin-disk laser, Opt. Lett. 41 (1), 171 (2016). DOI: https://doi.org/10.1364/OL.41.000171.
- A. Goldstein and A. Krell, Transparent ceramics at 50: Progress made and further prospects, J. Am. Ceram. Soc. 99 (10), 3173 (2016). DOI: https://doi.org/10.1111/jace.14553.
- B. X. Jiang et al., A comparison between TGT and Cz Grown Nd: YAG, J. Mater. Sci. Technol. 22 (5), 581 (2006). DOI: https://doi.org/10.3321/j.issn:1005-0302.2006.05.002.
- C. Li et al., Deformation mechanism and force modelling of the grinding of YAG single crystals, Int. J. Mach. Tool Manuf. 143, 23 (2019). DOI: https://doi.org/10.1016/j.ijmachtools.2019.05.003.
- D. G. Ahn, K. W. Byun, and M. C. Kang, Thermal characteristics in the cutting of inconel 718 superalloy using CW Nd: YAG laser, J. Mater. Sci. Technol. 26 (4), 362 (2010). DOI: https://doi.org/10.1016/S1005-0302(10)60059-X.
- L. Fabien et al., High-power Yb: YAG single-crystal fiber amplifiers for femtosecond lasers in cylindrical polarization, Opt. Lett. 40 (11), 2517 (2015). DOI: https://doi.org/10.1364/OL.40.002517.
- R. Q. Xie et al., Fabrication of Nd: YAG crystal slab using composite lap, High Power Laser Particle Beams 26 (1), 140 (2014). DOI: https://doi.org/10.3788/HPLPB201426.012007. (in Chinese).
- H. M. Martin, Techniques for optical fabrication of a 2-mm-thick adaptive secondary mirror, Adaptive Opt. Syst. Appl. 2534 (134), 134 (1995). and, and D. S. Anderson, DOI: https://doi.org/10.1117/12.217732.
- S. Miller et al., Fabrication of ultrathin mirrors for adaptive and space optics, Adaptive Opt. Syst. Appl. 3126, 391 (1997). DOI: https://doi.org/10.1117/12.279049.
- X. K. Shi et al., Measuring the precision machining surface of YAG crystalline substrates with SPM, Aviation Precision Manuf. Technol. 36 (2), 5 (2000). DOI: CNKI:SUN:HJZJ.0.2000-02-002. (in Chinese)
- M. Touge, J. Watanabe, and T. Matsuo, Ultra-thinning processing of dielectric substrates by precision abrasive machining, CIRP Ann. – Manuf. Technol. 55 (1), 317 (2006). DOI: https://doi.org/10.1016/S0007-8506(07)60425-9.
- X. L. Chen, D. P. Li, and Q. W. Yan, Study on method for manufacturing thin schmidt corrector, Astron. Res. Technol. 3 (3), 3283 (2006). DOI: https://doi.org/10.14005/j.cnki.issn1672-7673.2006.03.009..(in Chinese)
- Q. T. Huang et al., Research on ultra thin mirror fabrication techniques, Opt. Tech. 33 (5), 741 (2007). DOI: https://doi.org/10.3321/j.issn:1002-1582.2007.05.024. (in Chinese).
- J. Li, Y. Zhu, and C. T. Chen, Chemical mechanical polishing of transparent Nd: YAG ceramics, Key Eng. Mater. 375–376 (3), 278 (2008). DOI: https://doi.org/10.4028/.www.scientific.net/KEM.375-376.278.
- Q. Zhao et al., Control technique for mechanical strength of ultrathin polished Ge wafer, Semicond. Technol. 35 (8), 768 (2010). DOI: https://doi.org/10.3969/.j.issn.1003-353x.2010.08.006.(in Chinese)
- Y. B. Wang et al., Research on back protecting tape for ultrathin silicon wafer polishing process, Electron. Process Technol. 32 (1), 27 (6), 57 (2018). DOI: https://doi.org/10.3969/j.issn.1003-8965.2018.06.025. (in Chinese).
- L. Sun et al., Experimental study on ultra-precision polishing for ultrathin quartz substrates, J. Mech. Electric. Eng. 30 (9), 1055 (2013). DOI: https://doi.org/10.3969/j.issn.1001-4551.2013.09.005.(in Chinese)
- J. Du et al., Study on the mechanisms and control method of edge chipping fracture in the machining of brittle and hard materials, Mech. Sci. Technol. Aerospace Eng. 32 (10), 1451 (2013). DOI: https://doi.org/10.13433/j.cnki.1003-8728.2013.10.006.(in Chinese)
- M. Z. He et al., Double-side polishing of 3 mm large-aperture ultra-thin component, High Power Laser Particle Beams 25 (12), 3315 (2013). DOI: https://doi.org/10.3788/HPLPB20132512.3315.(in Chinese)
- H. Y. Li, N. Hua, and M. S. Sui, Study on the fracture of ultrathin fused quartz wafer during double sided polishing process, China Build. Mater. Sci. Technol. 27 (6), 57 (2018). (in Chinese)
- Z. X. Chen et al., Experimental research on double-sides processing of ultra-thin sapphire wafer based on layer stacked clamping, Surf. Technol. 50 (5), 340 (2021). DOI: https://doi.org/10.16490/j.cnki.issn.1001-3660.2021.05.038. (in Chinese).