References
- J. Rödel et al., Perspective on the development of lead-free piezoceramics, J. Am. Ceram. Soc. 92 (6), 1153 (2009). DOI: https://doi.org/10.1111/j.1551-2916.2009.03061.x.
- R. C. Garimella, V. R. Sastry, and M. S. Mohiuddin, Piezo-gen - an approach to generate electricity from vibrations, Proc. Earth Planet. Sci. 11, 445 (2015). DOI: https://doi.org/10.1016/j.proeps.2015.06.044.
- X. Xu et al., Application of piezoelectric transducer in energy harvesting in pavement, Int. J. Pavement Res. Technol. 11 (4), 388 (2018). DOI: https://doi.org/10.1016/j.ijprt.2017.09.011.
- J. Rödel et al., Transferring lead-free piezoelectric ceramics into application, J. Eur. Ceram. Soc. 35 (6), 1659 (2015). DOI: https://doi.org/10.1016/j.jeurceramsoc.2014.12.013.
- Y. Saito et al., Lead-free piezoceramics, Nature 432 (7013), 84 (2004). DOI: https://doi.org/10.1038/nature03028.
- P. Bomlai et al., Effect of Calcination Conditions and Excess Alkali Carbonate on the Phase Formation and Particle Morphology of Na0.5K0.5NbO3Powders, J. American Ceramic Society 90 (5), 1650 (2007). DOI: https://doi.org/10.1111/j.1551-2916.2007.01629.x.
- W. Liu, and X. Ren, Large piezoelectric effect in Pb-free ceramics, Phys. Rev. Lett. 103 (25), 257602 (2009). DOI: https://doi.org/10.1103/PhysRevLett.103.257602.
- Mishra, P. Sonia, and P. Kumar, Effect of sintering temperature on dielectric, piezoelectric and ferroelectric properties of BZT–BCT 50/50 ceramics, Journal of Alloys and Compounds 545, 210 (2012). DOI: https://doi.org/10.1016/j.jallcom.2012.08.017.
- X. Ji et al., Structural and electrical properties of BCZT ceramics synthesized by sol–gel process, J. Mater. Sci: Mater. Electron. 29 (9), 7592 (2018). DOI: https://doi.org/10.1007/s10854-018-8751-7.
- X. Lu et al., Decreasing sintering temperature for BCZT lead-free ceramics prepared via hydrothermal route, Funct. Mater. Lett. 10 (04), 1750046 (2017). DOI: https://doi.org/10.1142/S1793604717500461.
- Y. Tian et al., Phase evolutions and electric properties of BaTiO3 ceramics by a low-temperature sintering process, J. Mater. Sci: Mater. Electron. 25 (12), 5467 (2014). DOI: https://doi.org/10.1007/s10854-014-2330-3.
- A. Louaer et al., Crystallization kinetics and growth mechanism of 0.5 (Ba0.85Ca0.15)TiO3−0.5Ba(Zr0.1Ti0.9)O3 powders prepared via solid-state reaction, Phase Transitions 93 (1), 116 (2020). DOI: https://doi.org/10.1080/01411594.2019.1692014.
- W. Wang et al., Phase transitions in (1 − x)BaZr0.2Ti0.8O3−xBa0.7Ca0.3TiO3 powders and ceramic pellets, Ceram. Int. 40 (3), 3933 (2014). DOI: https://doi.org/10.1016/j.ceramint.2013.08.037.
- R. Hayati et al., Effects of Bi2O3 additive on sintering process and dielectric, ferroelectric, and piezoelectric properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 lead-free piezoceramics, J. Eur. Ceram. Soc. 36 (14), 3391 (2016). DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.05.033.
- Z. Wang et al., Synthesis, structure, dielectric, piezoelectric, and energy storage performance of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 ceramics prepared by different methods, J. Mater. Sci: Mater. Electron. 27 (5), 5047 (2016). DOI: https://doi.org/10.1007/s10854-016-4392-x.
- J. G. P. Biner, Advanced ceramic processing and technology, in Advanced Ceramic Processing and Technology (Noyes Publications, Park Ridge, NJ, 1990), p. 98.
- D. S. Keeble et al., Revised structural phase diagram of (Ba0.7Ca0.3TiO3)-(BaZr0.2Ti0.8O3), Appl. Phys. Lett. 102 (9), 092903 (2013). DOI: https://doi.org/10.1063/1.4793400.
- M. Acosta et al., BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives, Appl. Phys. Rev. 4 (4), 041305 (2017). DOI: https://doi.org/10.1063/1.4990046.
- S. Miao et al., Polar order and diffuse scatter in Ba(Ti1−xZrx)O3 ceramics, J. Appl. Phys. 106 (11), 114111 (2009). DOI: https://doi.org/10.1063/1.3253735.
- V. Buscaglia et al. , Average and local atomic-scale structure in BaZrxTi(1-x)O3 (x = 0. 10, 0.20, 0.40) ceramics by high-energy x-ray diffraction and Raman spectroscopy, J. Phys. Condens. Matter. 26 (6), 065901 (2014). DOI: https://doi.org/10.1088/0953-8984/26/6/065901.
- T. Hiroshima, K. Tanaka, and T. Kimura, Effects of microstructure and composition on the curie temperature of lead barium niobate solid solutions, J. Am. Ceram. Soc. 79 (12), 3235 (1996). DOI: https://doi.org/10.1111/j.1151-2916.1996.tb08100.x.
- P. Wang, Y. Li, and Y. Lu, Enhanced piezoelectric properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 lead-free ceramics by optimizing calcination and sintering temperature, J. Eur. Ceram. Soc. 31 (11), 2005 (2011). DOI: https://doi.org/10.1016/j.jeurceramsoc.2011.04.023.
- X. W. Wang et al., Structure, dielectric, and ferroelectric properties of Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics sintered at various temperatures, J. Mater. Sci: Mater. Electron. 31 (6), 4732 (2020). DOI: https://doi.org/10.1007/s10854-020-03030-5.