References
- B. Jaffe, Piezoelectric Ceramics, Elsevier, (Elsevier, London and New York), 2012
- G. H. Haertling, Ferroelectric ceramics: History and technology, J. Am. Ceram. Soc. 82 (4), 797 (1999). DOI: https://doi.org/10.1111/j.1151-2916.1999.tb01840.x.
- D. Berlincourt, C. Cmolik, and H. Jaffe, Piezoelectric properties of polycrystalline lead titanate zirconate compositions, Proc. IRE 48 (2), 220 (1960). DOI: https://doi.org/10.1109/JRPROC.1960.287467.
- K. Kakegawa et al., Compositional change and compositional fluctuation in Pb (Zr, Ti)O3 containing excess PbO, J. American Ceramic Society 78 (4), 1071 (1995). DOI: https://doi.org/10.1111/j.1151-2916.1995.tb08439.x.
- S. Mishra, A. Singh, and D. Pandey, Thermodynamic nature of phase transitions in Pb(ZrxTi1−x)O3 ceramics near the morphotropic phase boundary. I. Structural studies, Philos. Mag. B 76 (2), 213 (1997). DOI: https://doi.org/10.1080/01418639708241086.
- L. Wu et al., The DC resistivity of modified PZT ceramics, J. Phys. C: Solid State Phys. 16 (14), 2823 (1983). DOI: https://doi.org/10.1088/0022-3719/16/14/022.
- T. Badapanda, Structural, Electrical and optical study of ‘A’ site deficient Heterovalent ion doped Barium Zirconium Titanate Perovskite, 2010.
- Y. Yamashita, Large electromechanical coupling factors in perovskite binary material system, Jpn. J. Appl. Phys. 33 (Part 1, No. 9B), 5328 (1994). DOI: https://doi.org/10.1143/JJAP.33.5328.
- M. I. Morozov, and D. Damjanovic, Hardening-softening transition in Fe-doped Pb(Zr, Ti)O3 ceramics and evolution of the third harmonic of the polarization response, J. Appl. Phys. 104 (3), 034107 (2008). DOI: https://doi.org/10.1063/1.2963704.
- R. Verma, and S. Rout, Frequency-dependent ferro-antiferro phase transition and internal bias field influenced piezoelectric response of donor and acceptor doped bismuth sodium titanate ceramics, J. Appl. Phys. 126 (9), 094103 (2019). DOI: https://doi.org/10.1063/1.5111505.
- J. Rödel et al., Perspective on the development of lead‐free piezoceramics, J. Am. Ceram. Soc. 92 (6), 1153 (2009). DOI: https://doi.org/10.1111/j.1551-2916.2009.03061.x.
- K. J. Puttlitz, and G. T. Galyon, Impact of the ROHS directive on high-performance electronic systems, in: Lead-Free Electron. Solders, (Springer, Boston), 2006, pp. 347–365.
- C. Xu, D. Lin, and K. Kwok, Structure, electrical properties and depolarization temperature of (Bi0.5Na0.5)TiO3–BaTiO3 lead-free piezoelectric ceramics, Solid State Sci. 10 (7), 934 (2008). DOI: https://doi.org/10.1016/j.solidstatesciences.2007.11.003.
- T. Takenaka, K. Maruyama, and K. Sakata, (Bi1/2Na1/2)TiO3-BaTiO3 system for lead-free piezoelectric ceramics, Jpn. J. Appl. Phys. 30 (Part 1, No. 9B), 2236 (1991). DOI: https://doi.org/10.1143/JJAP.30.2236.
- P. Gonnard, and M. Troccaz, Dopant distribution between A and B sites in the PZT ceramics of type ABO3, J. Solid State Chem 23 (3-4), 321 (1978). DOI: https://doi.org/10.1016/0022-4596(78)90080-4.
- R. A. Malik et al., High strain in lead-free Nb-doped Bi1/2(Na0.84K0.16)1/2TiO3–SrTiO3 incipient piezoelectric ceramics, Appl. Phys. Express 7 (6), 061502 (2014). DOI: https://doi.org/10.7567/APEX.7.061502.
- T. H. Dinh et al., Comparison of structural, ferroelectric, and strain properties between A-site donor and acceptor doped Bi1/2(Na0.82K0.18)1/2TiO3 ceramics, Ceram. Int. 41, S458 (2015). DOI: https://doi.org/10.1016/j.ceramint.2015.03.150.
- J. Hao et al., Structure evolution and electrostrictive properties in (Bi0.5Na0.5)0.94Ba0.06TiO3–M2O5 (M = Nb, Ta, Sb) lead-free piezoceramics, J. Eur. Ceram. Soc. 36 (16), 4003 (2016). DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.06.020.
- C.-H. Hong et al., Lead-free piezoceramics–Where to move on?, J. Materiomics 2 (1), 1 (2016). DOI: https://doi.org/10.1016/j.jmat.2015.12.002.
- S. Prasertpalichat, and D. P. Cann, Hardening in non-stoichiometric (1 − x)Bi0.5Na0.5TiO3–xBaTiO3 lead-free piezoelectric ceramics, J. Mater. Sci. 51 (1), 476 (2016). DOI: https://doi.org/10.1007/s10853-015-9235-2.
- P. Fu et al., Piezoelectric, ferroelectric and dielectric properties of Nd2O3-doped (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics, Mater. Sci. Eng. B 167 (3), 161 (2010). DOI: https://doi.org/10.1016/j.mseb.2010.01.057.
- J. E. Daniels et al., Electric-field-induced phase transformation at a lead-free morphotropic phase boundary: Case study in a 93%(Bi0.5Na0.5)TiO3–7%BaTiO3 piezoelectric ceramic, Appl. Phys. Lett. 95 (3), 032904 (2009). DOI: https://doi.org/10.1063/1.3182679.
- S. Prasertpalichat et al., Comparison of structural, ferroelectric, and piezoelectric properties between A-site and B-site acceptor doped 0.93Bi0.5Na0.5TiO3-0.07BaTiO3 lead-free piezoceramics, J. Eur. Ceram. Soc 41, 4116–4128 (2021).
- R. Ranjan, and A. Dviwedi, Structure and dielectric properties of (Na0.50Bi0.50)1−xBaxTiO3: 0≤ x ≤ 0.10, Solid State Commun 135 (6), 394 (2005). DOI: https://doi.org/10.1016/j.ssc.2005.03.053.
- L. Pauling, The Nature of the Chemical Bond…, Cornell University Press, Ithaca, NY, 1960.
- L. H. Ahrens, The use of ionization potentials Part 1. Ionic radii of the elements, Geochim. Cosmochim. Acta 2 (3), 155 (1952). DOI: https://doi.org/10.1016/0016-7037(52)90004-5.
- R. A. Malik et al., Giant strain, thermally-stable high energy storage properties and structural evolution of Bi-based lead-free piezoceramics, J. Alloys Comp. 682, 302 (2016). DOI: https://doi.org/10.1016/j.jallcom.2016.04.297.
- R.-A. Eichel , Structural and dynamic properties of oxygen vacancies in perovskite oxides-analysis of defect chemistry by modern multi-frequency and pulsed EPR techniques , Phys. Chem. Chem. Phys. 13 (2), 368 (2011). DOI: https://doi.org/10.1039/b918782k.
- W. Jo et al., On the phase identity and its thermal evolution of lead free (Bi1/2Na1/2)TiO3-6 mol% BaTiO3, J. Appl. Phys. 110 (7), 074106 (2011). DOI: https://doi.org/10.1063/1.3645054.
- J. Kling et al., Temperature‐dependent phase transitions in the lead‐free piezoceramics (1–x–y)(Bi1/2Na1/2)TiO3–xBaTiO3–y(K0.5Na0.5)NbO3 observed by in situ transmission electron microscopy and dielectric measurements, J. Am. Ceram. Soc. 96 (10), 3312 (2013). DOI: https://doi.org/10.1111/jace.12493.
- W. Bai et al., Structure evolution and large strain response in BNT–BT lead-free piezoceramics modified with Bi(Ni0.5Ti0.5)O3, J. Alloys Comp. 649, 772 (2015). DOI: https://doi.org/10.1016/j.jallcom.2015.07.178.
- A. Ullah et al., Large strain under a low electric field in lead-free bismuth-based piezoelectrics, Appl. Phys. Lett. 103 (2), 022906 (2013). DOI: https://doi.org/10.1063/1.4813420.
- J. Zang et al., Impedance spectroscopy of (Bi1/2Na1/2)TiO3–BaTiO3 ceramics modified with (K0.5Na0.5)NbO3, J. Am. Ceram. Soc. 97 (5), 1523 (2014). DOI: https://doi.org/10.1111/jace.12804.
- Q. Xu et al., Dielectric behavior and impedance spectroscopy in lead-free BNT–BT–NBN perovskite ceramics for energy storage, Ceram. Int. 42 (8), 9728 (2016). DOI: https://doi.org/10.1016/j.ceramint.2016.03.062.
- M. Rawat, and K. Yadav, Compositional effects on structural, dielectric, ferroelectric and transport properties of Ba1−x(Bi0.5Li0.5)xTiO3 ceramics, Mater. Chem. Phys 148 (3), 655 (2014). DOI: https://doi.org/10.1016/j.matchemphys.2014.08.031.
- B. Barick, R. Choudhary, and D. Pradhan, Dielectric and impedance spectroscopy of zirconium modified (Na0.5Bi0.5)TiO3 ceramics, Ceram. Int. 39 (5), 5695 (2013). DOI: https://doi.org/10.1016/j.ceramint.2012.12.087.
- Q. Xu et al., Electrical properties and relaxation behavior of Bi0.5Na0.5TiO3-BaTiO3 ceramics modified with NaNbO3, J. Eur. Ceram. Soc 36 (10), 2469 (2016). DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.03.011.
- Y. Huang et al., High-temperature impedance spectroscopy of BaFe0.5Nb0.5O3 ceramics doped with Bi0.5Na0.5TiO3, Appl. Phys. A. 114 (3), 891 (2014). DOI: https://doi.org/10.1007/s00339-013-7735-y.
- C. Wang, T. Xia, and X. Lou, Effects of Fe2O3 doping on the electrical properties of Na0.47Bi0.47Ba0.06TiO3 lead-free ceramics, Ceram. Int. 44 (18), 22053 (2018). DOI: https://doi.org/10.1016/j.ceramint.2018.09.101.
- F. Li et al., Huge strain and energy storage density of A-site La3+ donor doped (Bi0.5Na0.5)0.94Ba0.06TiO3 ceramics, Ceram. Int 43 (1), 106 (2017). DOI: https://doi.org/10.1016/j.ceramint.2016.09.117.