References
- X. Zhang et al., Arc erosion behavior of the Al2O3-Cu/(W, Cr) electrical contacts, Composites Part B 160, 110 (2019). DOI: https://doi.org/10.1016/j.compositesb.2018.10.040.
- S. Pfeiffer et al., Al2O3/Cu-O composites fabricated by pressureless infiltration of paper-derived Al2O3 porous preforms, Ceram. Int. 44 (17), 20835 (2018). DOI: https://doi.org/10.1016/j.ceramint.2018.08.087.
- Z. Y. Wang et al., An electrodeposition approach to obtaining carbon nanotubes embedded copper powders for the synthesis of copper matrix composites, J. Alloys Compd 735, 1357 (2018). DOI: https://doi.org/10.1016/j.jallcom.2017.11.255.
- Z. Y. Wang et al., Improving strength and high electrical conductivity of multi-walled carbon nanotubes/copper composites fabricated by electrodeposition and powder metallurgy, J. Alloys Compd. 735, 905 (2018). DOI: https://doi.org/10.1016/j.jallcom.2017.11.200.
- Z. D. Shi et al., Facile synthesis of high-performance carbon nanosheet/Cu composites from copper formate, Carbon 165, 349 (2020). DOI: https://doi.org/10.1016/j.carbon.2020.04.061.
- A. Abu-Oqail et al., Effect of GNPs coated Ag on microstructure and mechanical properties of Cu-Fe dual-matrix nanocomposite, J. Alloys Compd. 781, 64 (2019). DOI: https://doi.org/10.1016/j.jallcom.2018.12.042.
- M. Abu–Okail et al., Effect of GNPs content at various compaction pressures and sintering temperatures on the mechanical and electrical properties of hybrid Cu/Al2O3/xGNPs nanocomposites synthesized by high energy ball milling, Ceram. Int. 46 (11), 18037 (2020). DOI: https://doi.org/10.1016/j.ceramint.2020.04.120.
- X. Zhang et al., A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites, Nat. Commun. 11 (1), 2775 (2020). DOI: https://doi.org/10.1038/s41467-020-16490-4.
- Y. G. Shi et al., Enhancing copper infiltration into alumina using spark plasma sintering to achieve high performance Al2O3/Cu composites, Ceram. Int. 44 (1), 57 (2018). DOI: https://doi.org/10.1016/j.ceramint.2017.09.062.
- A. Abu-Oqail et al., Effect of high energy ball milling on strengthening of Cu-ZrO2 nanocomposites, Ceram. Int. 45 (5), 5866 (2019). DOI: https://doi.org/10.1016/j.ceramint.2018.12.053.
- H. Wang et al., The preparation of Cu-coated Al2O3 composite powders by electroless plating, Ceram. Int. 37 (7), 2181 (2011). DOI: https://doi.org/10.1016/j.ceramint.2011.03.013.
- A. Mahato, and S. Mondal, Fabrication and microstructure of micro and nano silicon carbide reinforced copper metal matrix composites/nanocomposites, Silicon 13 (4), 1097 (2021). DOI: https://doi.org/10.1007/s12633-020-00491-5.
- Y. Pan et al., Fabrication, mechanical properties and electrical conductivity of Al2O3 reinforced Cu/CNTs composites, J. Alloys Compd. 782, 1015 (2019). DOI: https://doi.org/10.1016/j.jallcom.2018.12.222.
- W. J. Wang et al., Sintering and properties of mechanical alloyed Ti3AlC2-Cu composites, Mater. Sci. Eng., A 685, 154 (2017). DOI: https://doi.org/10.1016/j.msea.2017.01.003.
- W. Q. Lian et al., Fabrication of graphene oxide-Ti3AlC2 synergistically reinforced copper matrix composites with enhanced tribological performance, Ceram. Int. 45 (15), 18592 (2019). DOI: https://doi.org/10.1016/j.ceramint.2019.06.082.
- L. Guo et al., Synthesis of Cu-based TiCx composites via in-situ reaction between CuxTi melt and dissolvable solid carbon, Powder Technol. 362 (5), 375 (2020). DOI: https://doi.org/10.1016/j.powtec.2019.11.122.
- A. Bahador et al., Synergistic strengthening mechanisms of copper matrix composites with TiO2 nanoparticles, Mater. Sci. Eng., A 772, 138797 (2020). DOI: https://doi.org/10.1016/j.msea.2019.138797.
- S.-I. Hahn, and S. J. Hwang, Estimate of the Hall-Petch and Orowan effects in the nanocrystalline Cu with Al2O3 dispersoid, J. Alloys Compd. 483 (1-2), 207 (2009). DOI: https://doi.org/10.1016/j.jallcom.2008.07.205.
- X. H. Zhang et al., Characteristics of nano-alumina particles dispersion strengthened copper fabricated by reaction synthesis, Rare Metal Mater. Eng. 45 (4), 893 (2016). DOI: https://doi.org/10.1016/S1875-5372(16)30095-9.
- S.-J. Han et al., Fabrication of Al2O3 dispersion strengthened copper alloy by spray in-situ synthesis casting process, Met. Mater. Int. 21 (2), 270 (2015). DOI: https://doi.org/10.1007/s12540-015-3469-z.
- P. Mittal et al., Structural, wear and thermal behaviour of Cu–Al2O3–graphite hybrid metal matrix composites, Proc. Instit. Mech. Eng., Part L: J. Mater.: Des. Appl. 234 (8), 1154 (2020). DOI: https://doi.org/10.1177/1464420720929377.
- Y. Liang et al., Preparation and characterization of TiC particulate locally reinforced steel matrix composites from Cu–Ti–C system with various C particles, J. Asian Ceram. Soc. 2 (3), 281 (2014). DOI 101016/j.jascer.2014.06.001. DOI: https://doi.org/10.1016/j.jascer.2014.06.001.
- T. Yang et al., Ultrahigh-strength and ductile superlattice alloys with nanoscale disordered interfaces, Science 369 (6502), 427 (2020). DOI: https://doi.org/10.1126/science.abb6830.
- S. B. Chandrasekhar et al., Dynamic strain ageing in fine grained Cu-1 wt%Al2O3 composite processed by two step ball milling and spark plasma sintering, J. Alloys Compd. 656 (25), 423 (2016). DOI: https://doi.org/10.1016/j.jallcom.2015.09.250.
- X. Z. Kai et al., Strong and ductile particulate reinforced ultrafine-grained metallic composites fabricated by flake powder metallurgy, Scr. Mater. 68 (8), 555 (2013). DOI: https://doi.org/10.1016/j.scriptamat.2012.11.024.
- S. M. Almotairy et al., Superior mechanical performance of inductively sintered Al/SiC nanocomposites processed by novel milling route, Sci. Rep. 10 (1), 10368 (2020). DOI: https://doi.org/10.1038/s41598-020-67198-w.
- A. Fathy, O. Elkady, and A. Abu-Oqail, Microstructure, mechanical and wear properties of Cu–ZrO2 nanocomposites, Mater. Sci. Technol. 33 (17), 2138 (2017). DOI: https://doi.org/10.1080/02670836.2017.1353668.
- Z. Q. Li, J. S. Wang, and H. B. Huang, Influences of grain particle interfacial energies on second-phase particle pinning grain coarsening of polycrystalline, J. Alloys Compd. 818, 152848 (2020). DOI: https://doi.org/10.1016/j.jallcom.2019.152848.
- M. R. Akbarpour et al., Effect of nanoparticle content on the microstructural and mechanical properties of nano-SiC dispersed bulk ultrafine-grained Cu matrix composites, Mater. Des. 52, 881 (2013). DOI: https://doi.org/10.1016/j.matdes.2013.05.072.