References
- E. Useia, International energy outlook 2018-highlights 2018.
- A. Ss, B. Bm, and B. Mt, Development of a new eco-friendly composite material based on gypsum reinforced with a mixture of cork fibre and cardboard waste for building thermal insulation, Compos. Commun. 16 (C), 20 (2019).
- H. Gao et al., Characterization of light foamed concrete containing fly ash and desulfurization gypsum for wall insulation prepared with vacuum foaming process, Constr. Build. Mater. 281, 122411 (2021). DOI: https://doi.org/10.1016/j.conbuildmat.2021.122411.
- L. Yang et al., Effects of modified materials prepared from wastes on the performance of flue gas desulfurization gypsum-based composite wall materials, Constr. Build. Mater. 257, 119519 (2020). DOI: https://doi.org/10.1016/j.conbuildmat.2020.119519.
- W. Paul, P. Kevin, and J. B. Richard, Physical and mechanical properties of plasters incorporating aerogel granules and polypropylene monofilament fibres, Constr. Build. Mater. 158, 472 (2018).
- M. Schuss, U. Pont, and A. Mahdavi, Long-term experimental performance evaluation of aerogel insulation plaster, Energy Procedia 132, 508 (2017). DOI: https://doi.org/10.1016/j.egypro.2017.09.696.
- F. Chen et al., Fly ash based lightweight wall materials incorporating expanded perlite/SiO2 aerogel composite: Towards low thermal conductivity, Constr. Build. Mater. 249, 118728 (2020). DOI: https://doi.org/10.1016/j.conbuildmat.2020.118728.
- S. Liu et al., A novel building material with low thermal conductivity: Rapid synthesis of foam concrete reinforced silica aerogel and energy performance simulation, Energy Build. 177, 385 (2018). DOI: https://doi.org/10.1016/j.enbuild.2018.08.014.
- GB/T 10294. 2008. Thermal insulation material steady state thermal resistance and related characteristics of the determination of protective hot plate.
- GB/T 17669.3. 1999. Determination of mechanical properties of building gypsum.
- GB/T 20473. 2006. Building heat preservation sand.
- GB/T 17669.4. 1999, determination of physical properties of gypsum paste S1.
- N. Zhao et al., Direct production of porous carbon nanosheets particle composites from wasted litchi shell for supercapacitors, J. Alloys Compd. 788, 677 (2019). DOI: https://doi.org/10.1016/j.jallcom.2019.02.304.
- D. Sanz-Pont et al., Anhydrite aerogel composites for thermal insulation, Mater. Struct. 49 (9), 3647 (2016). DOI: https://doi.org/10.1617/s11527-015-0746-8.
- J. Peng, J. Dong, and J. Zhang, Study on the dissolution hydration properties and sintering activation mechanism of anhydrite, J. Build. Mater. 13 (01), 111 (2010).
- N. Zhao, L. Deng, and D. Luo, China Oxygen doped hierarchically porous carbon for electrochemical supercapacitor, Int. J. Electrochem. Sci. 13 (11), 10626 (2018). DOI: https://doi.org/10.20964/2018.11.20.
- N. Zhao, L. Deng, and D. Luo, Electrospun antimony tin oxide nanofibers with superior stability as anode material for li-ion batteries, Int. J. Electrochem. Sci. 13, 10612 (2018). DOI: https://doi.org/10.20964/2018.11.36.
- D. Luo et al., Enhanced electrochemical performance of cnts/α-fe2o3/ppy composite as anode material for lithium ion batteries, Trans. Indian Ceram. Soc. 78 (1), 34 (2019). DOI: https://doi.org/10.1080/0371750X.2019.1583134.