References
- B. Wang et al., Mechanism of damage generation during drilling of carbon/epoxy composites and titanium alloy stacks, Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 228 (7), 698 (2014). DOI: https://doi.org/10.1177/0954405413508117.
- X. Wang et al., Comparative tool wear study based on drilling experiments on CFRP/Ti stack and its individual layers, Wear 317 (1–2), 265 (2014). DOI: https://doi.org/10.1016/j.wear.2014.05.007.
- M. Ramulu, T. Branson, and D. Kim, A study on the drilling of composite and titanium stacks, Compos. Struct. 54 (1), 67 (2001). DOI: https://doi.org/10.1016/S0263-8223(01)00071-X.
- B. Luo et al., A novel prediction model for thrust force and torque in drilling interface region of CFRP/Ti stacks, Int. J. Adv. Manuf. Technol. 81 (9–12), 1497 (2015). DOI: https://doi.org/10.1007/s00170-015-7294-9.
- T. Chensheng, and W. Wei, Research on automatic drilling tool technology for aircraft assembly, Aeronaut. Manuf. Technol. 475 (6), 43 (2015).
- M. Slamani, J. F. Chatelain, and H. Hamedanianpour, Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP, Int. J. Mater. Form 8 (2), 305 (2015). DOI: https://doi.org/10.1007/s12289-014-1170-2.
- L. Chunqi, Y. Jun, and F. Yucan, Research status and development trend analysis of aeronautical laminate material drilling technology, Mach. Manuf. Autom. 3, 24–26 (2015).
- D. Wu et al., Influence of grinding to the surface and subsurface quality of KDP crystal, Adv. Mater. Res. 53–54, 203 (2008). DOI: https://doi.org/10.4028/www.scientific.net/AMR.53-54.203.
- J. Xu, and M. El Mansori, Numerical modeling of stacked composite CFRP/Ti machining under different cutting sequence strategies, Int. J. Precis. Eng. Manuf. 17 (1), 99 (2016). DOI: https://doi.org/10.1007/s12541-016-0013-0.
- L. N. López de Lacalle et al., Design and test of a multitooth tool for CFRP milling, J. Compos. Mater. 43 (26), 3275∼ (2009). DOI: https://doi.org/10.1177/0021998309345354.
- E. O. Ezugwu et al., Evaluation of the performation of CBN tools when turning Ti-6Al-4V alloy with high pressure coolant supplies, Int. J. Mach. Tools Manuf. 45 (9), 1009 (2005). DOI: https://doi.org/10.1016/j.ijmachtools.2004.11.027.
- A. N. Amin, A. F. Ismail, and M. K. Nor Khairusshima, Effectiveness of uncoated WC-Co and PCD inserts in end milling of titanium alloy-Ti-6Al-4V, J. Mater. Process. Technol. 192–193, 147 (2007). DOI: https://doi.org/10.1016/j.jmatprotec.2007.04.095.
- G. A. Oosthuizen, G. Akdogan, and N. Treurnicht, The performance of PCD tools in high-speed milling of Ti6Al4V, Int. J. Adv. Manuf. Technol. 52 (9–12), 929∼ (2011). DOI: https://doi.org/10.1007/s00170-010-2804-2.
- L. Zhou et al., Hole diameter variation and roundness in dry orbital drilling of CFRP/Ti stacks, Int. J. Adv. Manuf. Technol. 87 (1–4), 811 (2016). DOI: https://doi.org/10.1007/s00170-016-8528-1.
- H. Wang et al., A comparative study on helical milling of CFRP/Ti stacks and its individual layers, Int. J. Adv. Manuf. Technol. 86 (5–8), 1973 (2016). DOI: https://doi.org/10.1007/s00170-015-8296-3.
- E. Brinksmeier, and R. Janssen, Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys, CIRP Ann. Manuf. Technol. 51 (1), 87 (2002). DOI: https://doi.org/10.1016/S0007-8506(07)61472-3.
- G. He et al., Helical milling of CFRP/Ti-6Al-4V stacks with varying machining parameters, Trans. Tianjin Univ. 21 (1), 56 (2015). DOI: https://doi.org/10.1007/s12209-015-2360-9.