References
- K. Lesniak-Ziolkowska et al., Antibacterial and cytocompatible coatings based on poly(adipic anhydride) for a Ti alloy surface, Bioact. Mater. 5 (3), 709 (2009). DOI: 10.1016/j.bioactmat.2020.04.020.
- S. Liu et al., Superelastic behavior of in-situ eutectic-reaction manufactured high strength 3D porous NiTi-Nb scaffold, Scr. Mater. 181, 121 (2020). DOI: 10.1016/j.scriptamat.2020.02.025.
- D. Carou et al., Latest advances in the micro-milling of titanium alloys: A review, Procedia Manuf. 13, 275 (2017). DOI: 10.1016/j.promfg.2017.09.071.
- B. Niu, J. Sun, and B. Yang, Multisensory based tool wear monitoring for practical applications in milling of titanium alloy, Mater. Today: Proc. 22, 1209 (2020). DOI: 10.1016/j.matpr.2019.12.126.
- N. Joy et al., Experimental investigation and analysis of drilling in Grade 5 Titanium alloy (Ti-6Al-4V), Mater. Today: Proc. 21 (1), 335 (2020). DOI: 10.1016/j.matpr.2019.05.458.
- C. M. Rao, S. S. Rao, and M. A. Herbert, Development of novel cutting tool with a micro-hole pattern on PCD insert in machining of titanium alloy, J. Manuf. Process. 36, 93 (2018).
- J. Ren et al., Tool determination and geometry parameter optimization of carbide tool in high-speed milling of third-generation γ-TiAl alloy, J. Braz. Soc. Mech. Sci. Eng. 40 (10), 491 (2018). DOI: 10.1007/s40430-018-1408-x.
- V. Veeranaath, Experimental investigation of process parameters in orthogonal machining of Ti6Al4V with TiC coated PCBN inserts – a finite element analysis, Mater. Today: Proceed. 5 (9), 19547 (2018).
- A. Majeed, A. Iqbal, and J. Lv, Enhancement of tool life in drilling of hardened AISI 4340 steel using 3D FEM modeling, Int. J. Adv. Manuf. Technol. 95 (5–8), 1875 (2017).
- D. Arulkirubakaran, V. Senthilkumar, and V. Kumawat, Effect of micro-textured tools on machining of Ti–6Al–4V alloy: An experimental and numerical approach, Int. J. Refract. Met. Hard Mater. 54, 165 (2016).
- P. Huang et al., Study on vibration reduction mechanism of variable pitch end mill and cutting performance in milling titanium alloy, Int. J. Adv. Manuf. Technol. 67 (5–8), 1385 (2012).
- C. Agrawal et al., Tool wear progression and its effects on energy consumption and surface roughness in cryogenic assisted turning of Ti-6Al-4V, Int. J. Adv. Manuf. Technol. 111 (5–6), 1319 (2020).
- W. Zhao et al., Effect of liquid nitrogen cooling on surface integrity in cryogenic milling of Ti-6Al-4 V titanium alloy, Int. J. Adv. Manuf. Technol. 106 (3–4), 1497 (2019).
- F. Wang, and Y. Wang, Investigate on effect of cryogenic cooling on oxidation wear of WC-Co carbide tool milling titanium alloy, Mach. Sci. Technol. 23 (6), 906 (2019).