Advanced search
Publication Cover
Integrated Ferroelectrics
An International Journal
Volume 235, 2023 - Issue 1
Submit an article Journal homepage
59
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Effect of Process Parameters on Properties of NiCrAl20%WC Cladding Layer

Binfeng Hea Shaanxi Key Laboratory of Surface Engineering and Remanufacturing, Xi’an University, Xi’an, Shaanxi, ChinaView further author information
,
Fangxia Yea Shaanxi Key Laboratory of Surface Engineering and Remanufacturing, Xi’an University, Xi’an, Shaanxi, ChinaView further author information
,
Ling Liua Shaanxi Key Laboratory of Surface Engineering and Remanufacturing, Xi’an University, Xi’an, Shaanxi, ChinaView further author information
,
Fangyi Zhaib School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo, Henan, ChinaCorrespondence[email protected] [email protected]
View further author information
&
Guofa Mib School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo, Henan, ChinaView further author information
Pages 126-136 | Received 19 Aug 2022, Accepted 09 Mar 2023, Published online: 22 May 2023

References

  • W. X. Diao, H. B. Tang, and Y. L. Fang, Microstructure and wear resistance of laser clad Cr_7C_3 reinforced Cr-Ni-Si coating, Las. Tech. 35 (4), 457 (2011).
  • M. R. Ripoll et al., The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings, Mat. & Des. 99, 509 (2016). DOI: 10.1016/j.matdes.2016.03.081.
  • H. Torres et al., Experimental simulation of high temperature sliding contact of hot rolled steel, Trib. Int. 93, 745 (2016). DOI: 10.1016/j.triboint.2015.01.007.
  • S. Zhou, X. Dai, and X. Zeng, Effects of processing parameters on structure of Ni-based WC composite coatings during laser induction hybrid rapid cladding, Appl. Surf. Sci. 255 (20), 8494 (2009). DOI: 10.1016/j.apsusc.2009.05.161.
  • G. Sun et al., Effect of scanning speeds on microstructure and wear behavior of laser-processed NiCr–Cr3C2–MoS2–CeO2 on 38CrMoAl steel, Opt. & Las. Tech. 77, 80 (2016). DOI: 10.1016/j.optlastec.2015.08.008.
  • F. X. Huang et al., Effects of process parameters on microstructure and hardness of layers by laser cladding, ISIJ Int. 51 (3), 441 (2011). DOI: 10.2355/isijinternational.51.441.
  • R. Cottam, and M. Brandt, Laser cladding of Ti-6Al-4V Powder on Ti-6Al-4V substrate: effect of laser cladding parameters on microstructure, in Lasers in Manufacturing 2011: Proceedings of the 6th International Wlt Conference on Lasers in Manufacturing, Vol. 12 (2011), pp. 323–329. DOI: 10.1016/j.phpro.2011.03.041.
  • F. Weng et al., Microstructures and wear properties of laser cladding Co-based composite coatings on Ti–6Al–4V, Hot Work. Tech. 80, 174 (2015). DOI: 10.1016/j.matdes.2015.05.005.
  • W. Li et al., Effect of WC mass fraction on the microstructure and friction properties of WC/Ni60 laser cladding layer of brake discs, Special Casting & Nonferrous Alloys 47 (20), 28754 (2021). DOI: 10.1016/j.ceramint.2021.07.035.
  • P. A. Kobryn, and E. H. Moore, The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V, Scripta Materialia (4), 43 (2000).
  • T. Savanth, J. Singh, and J. S. Gill, Laser power and scanning speed influence on the microstructure, hardness, and slurry erosion performance of Colmonoy-5 claddings, Materials 234 (7), 947 (2020). DOI: 10.1177/1464420720922568.
  • S.-H. Si et al., Effect of laser power on microstructure and wear resistance of WCP/Ni cermet coating, J. Iron and Steel Res., Int. 13 (3), 74 (2006). DOI: 10.1016/S1006-706X(06)60065-4.
  • M. Zhong et al., High-power laser cladding Stellite 6 + WC with various volume rates, J. Laser Appl. 13 (6), 247 (2001). DOI: 10.2351/1.1418706.
  • Y. Sun, and M. Hao, Statistical analysis and optimization of process parameters in Ti6Al4V laser cladding using Nd:YAG laser, Optics and Lasers in Eng. 50 (7), 985 (2012). DOI: 10.1016/j.optlaseng.2012.01.018.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.