References
- Aoki T, Takagi T, Komura I, et al. Study of a methodology of identifying important research problems by the PIRT process. J. Nucl. Sci. Technol. 2014;51:832–844.10.1080/00223131.2014.898596
- Komura I, Hirasawa T, Nagai S, et al. Crack detection and sizing technique by ultrasonic and electromagnetic methods. Nucl. Eng. Des. 2001;206:351–362.10.1016/S0029-5493(00)00421-0
- Light GM, Fisher JL, Tennis RF, et al. Detection and sizing of defects in control rod drive mechanism penetrations using eddy current and ultrasonics. J. Pressure Vessel Technol. 1996;118:301–307.10.1115/1.2842192
- Nishimizu A, Endo H, Tooma M, et al. Non-destructive examination using a flexible multi-coil eddy current probe for weld surfaces of core internal components of nuclear power plants. Insight. 2012;54:134–137.10.1784/insi.2012.54.3.134
- Auld BA, Moulder JC. Review of advances in quantitative eddy current nondestructive evaluation. J. Nondestr. Eval. 1999;18:3–36.10.1023/A:1021898520626
- Bowler JR. Review of eddy-current inversion with application to non-destructive evaluation. Int. J. Appl. Electromagnet. Mech. 1997;8:3–16.
- Cheng W, Komura I, Shiwa M, et al. Eddy current examination of fatigue cracks in Inconel welds. J. Pressure Vessel Technol. 2006;129:169–174.
- Nishimizu A, Matsui T, Koike M, et al. Development of eddy current testing system for complicated-shaped components. Trans. At. Eng. Soc. Jpn. 2008;7:142–151.10.3327/taesj.J07.013
- Raj B, Mukhopadhyay CK, Jayakumar T. Frontiers in NDE research nearing maturity for exploitation to ensure structural integrity of pressure retaining components. Int. J. Press. Vessels Pip. 2006;83:322–335.10.1016/j.ijpvp.2006.02.025
- Yusa N, Janousek L, Rebican M, et al. Caution when applying eddy current inversion to stress corrosion cracking. Nucl. Eng. Des. 2006;236:211–221.10.1016/j.nucengdes.2005.06.016
- Yusa N, Huang H, Miya K. Numerical evaluation of the ill-posedness of eddy current problems to size real cracks. NDT&E Int. 2007;40:185–191.
- Janousek L, Smetana M, Alman M. Decline in ambiguity of partially conductive cracks’ depth evaluation from eddy current testing signals. Int. J. Appl. Electromagnet. Mech. 2012;39:329–334.
- The Japan Electric Association. 2010. JEAG4217-2010.
- Yusa N, Hashizume H. Evaluation of stress corrosion cracking as a function of its resistance to eddy currents. Nucl. Eng. Des. 2009;239:2713–2718.10.1016/j.nucengdes.2009.08.032
- Matsuoka F, Kameari A. Calculation of three dimensional eddy current by FEM-BEM coupling method. IEEE Trans. Magn. 1998;24:182–185.
- Takagi T, Fukutomi H. Benchmark activities of eddy current testing for steam generator tubes. In: Udpa SS, et al., editors. Electromagnetic nondestructive evaluation (IV). IOS Press; 2000. p. 235–252.
- Wang J, Yusa N, Pan H, Udpa SS, Takagi T, Pavo J, Albanese R. Discussion of numerical modeling of thermal fatigue cracks based on eddy current signals. NDT&E Int. 2013;55:96–101.