References
- Garnham JE, Fletcher DI, Davis CL, et al. Visualization and modelling to understand rail rolling contact fatigue cracks in three dimensions. Proc Inst Mech Eng F J Rail Rapid Transit. 2011;225(F2):165–178.
- Pohl R, Erhard A, Montag HJ, et al. NDT techniques for railroad wheel and gauge corner inspection. NDT E Int. 2004;37(2):89–94.
- Ringsberg JW, Bergkvist A. On propagation of short rolling contact fatigue cracks. Fatigue Fract Eng Mater Struct. 2003;26(10):969–983.
- Tillberg J, Larsson F, Runesson K. A study of multiple crack interaction at rolling contact fatigue loading of rails. Proc Inst Mech Eng F J Rail Rapid Transit. 2009;223(4):319–330.
- Cannon DF, Edel KO, Grassie SL, et al. Rail defects: an overview. Fatigue Fract Eng Mater Struct. 2003;26(10):865–886.
- Magel EE. Rolling contact fatigue: a comprehensive review. Department of Transportation-Federal railroad administration; Washington (DC); 2011.
- Nicholson GL, Rowshandel H, Hao XJ, et al. Measurement and modelling of ACFM response to multiple RCF cracks in rail and wheels. Ironmaking Steelmaking. 2013;40(2):87–91.
- Li W, Chen GM, Zhang CR, et al. Simulation analysis and experimental study of defect detection underwater by ACFM probe. China Ocean Eng. 2013;27(2):277–282.
- Yuan XA, Li W, Chen GM, et al. Two-step interpolation algorithm for measurement of longitudinal cracks on pipe strings using circumferential current field testing system. IEEE Trans Ind Inform. 2018;14(2):394–402.
- Papaelias MP, Roberts C, Davis CL. A review on non-destructive evaluation of rails: state-of-the-art and future development. Proc Inst Mech Eng F J Rail Rapid Transit. 2008;222(4):367–384.
- Howitt M. Bombardier brings ACFM into the rail industry. Insight. 2002;44(6):379–382.
- Topp D, Smith M. Application of the ACFM inspection method to rail and rail vehicles. Insight-Non-Destructive Test Condition Monit. 2005;47(6):354–357.
- Railtrack. Permanent way special instruction No. 4, Issue 2; 2002.
- Rowshandel H. The development of an autonomous robotic inspection system to detect and characterise rolling contact fatigue cracks in railway track [ PhD thesis]. University of Birmingham; 2014.
- Shen J, Zhou L, Rowshandel H, et al. Determining the propagation angle for non-vertical surface-breaking cracks and its effect on crack sizing using an ACFM sensor. Meas SciTechnol. 2015;26(11):115604.
- Rowshandel H, Nicholson GL, Shen J, et al. Characterisation of clustered rolling contact fatigue cracks in rails using an ACFM sensor and application of an artificial neural network. NDT E Int. 2018;98:80–88.
- Shen J. Responses of alternating current field measurement (ACFM) to rolling contact fatigue (RCF) cracks in railway rails. PhD thesis, University of Warwick, 2017.
- Comsol Multiphysics® v.5.0. COMSOL AB, Stockholm, Sweden. 2015
- Nicholson GL, Kostryzhev AG, Hao XJ, et al. Modelling and experimental measurements of idealised and light-moderate RCF cracks in rails using an ACFM sensor. NDT E Int. 2011;44(5):427–437.
- Nicholson G, Davis C. Modelling of the response of an ACFM sensor to rail and rail wheel RCF cracks. NDT E Int. 2012;46:107–114.
- Rowshandel H, Nicholson GL, Davis CL, et al. A robotic approach for NDT of RCF cracks in rails using an ACFM sensor. Insight. 2011;53(7):368–376.
- Rowshandel H, Nicholson GL, Davis CL, et al. An integrated robotic system for automatic detection and characterisation of rolling contact fatigue cracks in rails using an alternating current field measurement sensor. Proc Inst Mech Eng F J Rail Rapid Transit. 2013;227(4):310–321.
- Rowshandel H, Nicholson G, Shen J, et al. An improved characterisation method for sizing multiple rolling contact fatigue cracks in rails using a machine learning approach. NDT E Int. 2018;98:80–88.