References
- Potter MDG, Dixon S. Ultrasonic texture measurement of sheet metals: an integrated system combining Lamb and shear wave techniques. Nondestruct Test Eval. 2005;20(4):201–210.
- Davis CL, Mukhopadhyay P, Strangwood M, et al. Comparison between elastic modulus and ultrasonic velocity anisotropy with respect to rolling direction in steels. Ironmaking Steelmaking. 2008;35(5):359–366.
- Carvajal L, Artigas A, Monsalve A, et al. Acoustic birefringence and Poisson’s ratio determined by ultrasound: tools to follow-up deformation by cold rolling and recrystallization. Mater Res. 2017;20:304–310.
- Clark AV, Hehman CS, Nguyen TN. Ultrasonic measurement of stress using a rotating EMAT. J Res Nondestruct Eval. 2000;12(4):217–239.
- Allen D, Sayers C. The measurement of residual stress in textured steel using an ultrasonic velocity combinations technique. Ultrasonics. 1984;22:179–188.
- Arora A. Effect of texture and stress on acoustic birefringence. Scr Mater. 1984;18(8):763–766.
- Gonchar AV, Mishakin VV, Klyushnikov VA, et al. Variation of elastic characteristics of metastable austenite steel under cycling straining. Tech Phys. 2017;62(4):537–541.
- Truell R, Elbaum C, Chick B. Ultrasonic methods in solid state physics. New York: Academic; 1969.
- Zolotorevsky N, Rybin VV. Фрагментация и текстурообразование при деформации металлических материалов [Fragmentation and texture formation during the deformation of metallic materials]. Moscow: Yurayt Publishing House; 2016. Russian.
- Rybin VV. Большие пластические деформации и разрушение металлов [Large plastic deformation and destruction of metals]. Moscow: Metallurgy; 1986. Russian.
- Allen D, Sayers C. The measurement of residual stress in textured steel using an ultrasonic velocity combinations technique. Ultrasonics. 1984;22:179–188.
- Mishakin VV, Naumov M, Mishakin SV, et al. Development of an acoustic method for assessing the damage to metal alloys before formation of a macrocrack. Russ J Nondestruct Test. 2007;43(10):677–682.
- Zisman AA, Rybin VV. Basic configurations of interfacial and junction defects induced in a polycrystal by deformation of grains. Acta Mater. 1996;44:403–407.
- Rybin VV, Perevezentsev VN, Kirikov SV. Formation of strain-induced broken dislocation boundaries at faceted grain boundaries. Phys Met Metall. 2018;119(5):421–429.
- Sachs G. Zur Ableitung einer Fliefibedingung. Zs. Verein Deutsch Ing. 1928;72:734–736. Deutsch.
- de Wit SR. Continuum Theory of Disclinations [ Russian translation]. Moscow: Mir; 1978.
- Kröner E. Continuum theory of defects. Amsterdam: North Holland Publ. Comp.; 1981.
- Romanov AE. Mechanics and physics of disclinations in solids. Eur J Mech A Solids. 2003;22:727–741.
- Rybin VV, Zisman AA. Zolotorevsky NYu Junction disclinations in plastically deformed crystals. Acta Metall Mater. 1993;41(7):2211–2217.
- Needleman A, van der Giessen E. Discrete dislocation and continuum descriptions of plastic flow. Mater Sci Eng A. 2001;309–310:1–13.
- Kirikov SV, Perevezentsev VN. К расчету упругих напряжений от мезодефектов, формирующихся на границах зерен при пластической деформации поликристаллов [Calculation of elastic stresses from mesodefects formed at grain boundaries during plastic deformation of polycrystals]. Проблемы прочности и пластичности. 2019;81(2):212–221. Russian.
- Zisman AA, Rybin VV. Mesoscopic stress field arising from the grain interaction in plastically deformed polycrystals. Acta Mater. 1998;46:457–464.
- Sayers CM. Ultrasonic velocities in anisotropic polycrystalline aggregates. J Phys D. 1982;1(5):2157–2167.