503
Views
2
CrossRef citations to date
0
Altmetric
Research Article

A parameter optimized variational mode decomposition method for rail crack detection based on acoustic emission technique

, , , &
Pages 411-439 | Received 08 Jan 2020, Accepted 02 Jun 2020, Published online: 13 Jul 2020

References

  • Bruzelius K, Mba D. An initial investigation on the potential applicability of acoustic emission to rail track fault detection. NDT E Int. 2004;37(7):507–516.
  • Zhang X, Zou Z, Wang K, et al. A new crack detection method using LSTM network for actual application based on AE technique. Appl Acoust. 2018;142:78–86.
  • Yilmazer P, Amini A, Papaelias M. The Structural health condition monitoring of rail steel using acoustic emission techniques. 51st Annual Conference of the British Institute of Non-Destructive Testing; 2012; Northamptonshire, UK.
  • Zhang J, Ma Y, Yan W, et al. Defect detection and location in switch rails by acoustic emission and Lamb wave analysis: A feasibility study. Appl Acoust. 2016;105:67–74.
  • Wang J, Liu X, Ni YQ. A Bayesian probabilistic approach for acoustic emission-based rail condition assessment. Comput Aided Civ Infrastruct Eng. 2018;33(1):21–34.
  • Thakkar N A, Steel J A, Reuben RL. Rail-wheel interaction monitoring using Acoustic Emission: A laboratory study of normal rolling signals with natural rail defects. Mech Syst Signal Process. 2010;24(1):256–266.
  • Siracusano G, Lamonaca F, Tomasello R, et al. A framework for the damage evaluation of acoustic emission signals through Hilbert-Huang transform. Mech Syst Signal Process. 2016;75:109–122.
  • Bassim MN. Detection of fatigue crack propagation with acoustic emission. NDT E Int. 1992;25(6):287–289.
  • Zhang X, Feng N, Wang Y, et al. Acoustic emission detection of rail defect based on wavelet transform and Shannon entropy. J Sound Vib. 2015;339:419–432.
  • Bianchi D, Mayrhofer E, Gröschl M, et al. Wavelet packet transform for detection of single events in acoustic emission signals. Mech Syst Signal Process. 2015;64-65:441–451.
  • Zhang X, Wang Y, Wang K, et al. Rail crack detection based on the adaptive noise cancellation method of EMD at high speed. IEEE International Instrumentation and Measurement Technology Conference (I2MTC); 2017; Turin, Italy.
  • Han L, Li C, Shen L. Application in feature extraction of AE signal for rolling bearing in EEMD and cloud similarity measurement. Shock Vib. 2015;2015:1–8.
  • Dragomiretskiy K, Zosso D. Variational mode decomposition. IEEE Trans Signal Process. 2014;62(3):531–544.
  • Wang Y, Markert R. Filter bank property of variational mode decomposition and its applications. Signal Process. 2016;120:509–521.
  • Xiao Y, Li J, Bai L, et al. A small leak detection method based on VMD adaptive de-noising and ambiguity correlation classification intended for natural gas pipelines. Sensors. 2016;16(12):2116–2132.
  • Li Y, Li Y, Chen X, et al. Denoising and feature extraction algorithms using NPE combined with VMD and their applications in ship-radiated noise. Symmetry. 2017;9(11):256–274..
  • Viswanath A, Jose KJ, Krishnan N, et al. Spike detection of disturbed power signal using VMD. Procedia Comput Sci. 2015;46:1087–1094.
  • Chen L, Liu L, He M, et al. Gearbox Fault Diagnosis Based on VMD and Acoustic Emission Technology. IEEE International Instrumentation and Measurement Technology Conference (I2MTC); 2019; Auckland, New Zealand.
  • Zarour D, Thomas M, Meziani S, et al. Diagnosis of bearing defects by variational modes decomposition from vibratory and acoustic emission measurements. Int J Veh Noise Vibr. 2019;15(1):21-41.
  • Gao Z, Wang X, Lin J, et al. Online evaluation of metal burn degrees based on acoustic emission and variational mode decomposition. Measurement. 2017;103:302–310.
  • Shi P, Yang W. Precise feature extraction from wind turbine condition monitoring signals by using optimized variational mode decomposition. IET Renewable Power Gener. 2016;11(3):245–252.
  • Yang K, Wang G, Dong Y, et al. Early chatter identification based on an optimized variational mode decomposition. Mech Syst Signal Process. 2019;115:238–254.
  • Yan X, Jia M, Xiang L. Compound fault diagnosis of rotating machinery based on OVMD and a 1.5-dimension envelope spectrum. Meas Sci Technol. 2016;27(7):075002.
  • Zhang X, Miao Q, Zhang H, et al. A parameter-adaptive VMD method based on grasshopper optimization algorithm to analyze vibration signals from rotating machinery. Mech Syst Signal Process. 2018;108:58–72.
  • Hua ZH, Huang NE. Ensemble empirical mode decomposition: a noise-assisted data analysis method. Adv Adapt Data Anal. 2009;1(1):1–41.
  • Kennedy J, Eberhart R Particle swarm optimization. International Conference on Neural Networks; 1995; Perth, Australia.
  • Hao Q, Zhang X, Wang K, et al. A signal-adapted wavelet design method for acoustic emission signals of rail cracks. Appl Acoust. 2018;139:251–258.
  • Bandt C, Pompe B. Permutation entropy: A natural complexity measure for time series. Phys Rev Lett. 2002;88(17):174102.
  • Duda R, Hart P. Pattern Classification and Scene Analysis. New York: Wiley Press; 1973.
  • Jiang X, Wang J, Shi J, et al. A coarse-to-fine decomposing strategy of VMD for extraction of weak repetitive transients in fault diagnosis of rotating machines. Mech Syst Signal Process. 2019;116:668–692.
  • Han T, Jiang D, Zhao Q, et al. Comparison of random forest, artificial neural networks and support vector machine for intelligent diagnosis of rotating machinery. Trans Inst Meas Control. 2018;40(8):2681–2693.
  • Han T, Liu C, Yang W, et al. Deep transfer network with joint distribution adaptation: A new intelligent fault diagnosis framework for industry application. ISA Trans. 2020;97:269–281.
  • He Z, Shao H, Zhang X, et al. Improved deep transfer auto-encoder for fault diagnosis of gearbox under variable working conditions with small training samples. IEEE Access. 2019;7:115368–115377.
  • Shao H, Cheng J, Jiang H, et al. Enhanced deep gated recurrent unit and complex wavelet packet energy moment entropy for early fault prognosis of bearing. Knowledge-Based Syst. 2020;188:105022.
  • Zhang X, Feng N, Zou Z, et al. An investigation on rail health monitoring using acoustic emission technique by tensile test. IEEE International Instrumentation and Measurement Technology Conference (I2MTC); 2015; Pisa, Italy.
  • Wang K, Zhang X, Han R, et al. An improved recovery method of rail crack signal based on least-square deconvolution algorithm with sectional regulatory factors. IEEE International Instrumentation and Measurement Technology Conference (I2MTC); 2018; Houston, USA.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.