Assessment of remaining fatigue life based on temperature-evolution measurements

References

• Bremond P, Potet P. Lock-in thermography: a tool to analyze and locate thermomechanical mechanisms in materials and structures. In: Proceedings SPIE (Thermosense XXIII). Vol. 4360; Orland, Florida, USA; 2001; p. 560–566.
   Google Scholar
• Krapez J-C, Pacou D Thermography detection of damage initiation during fatigue tests. In: Proceedings SPIE (Thermosense XXIV). Vol. 4710; Orland, Florida, USA; 2002; p. 435–449.
   Google Scholar
• De Finis R, Palumbo D, Galietti U. Mechanical behaviour of stainless steels under dynamic loading: an investigation with thermal methods. J Imaging. 2016;2:32.
   Web of Science ®Google Scholar
• Shiozawa D, Inagawa T, Washio T, et al. Accuracy improvement in dissipated energy measurement by using phase information. Meas Sci Technol. 2017;28:044004.
   Web of Science ®Google Scholar
• Kawai R, Yoshikawa T, Kurokawa Y, et al. Rapid evaluation of fatigue limit using infrared thermography: comparison between two methods for quantifying temperature evolution. Mech Eng J. 2017;4:17–00009.
   Web of Science ®Google Scholar
• Ricotta M, Meneghetti G, Atzori B, et al. Comparison of experimental thermal methods for the fatigue limit evaluation of a stainless steel. Metals. 2019;9:677.
   Web of Science ®Google Scholar
• Boulanger T, Chrysochoos A, Mabru C, et al. Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels. Int J Fatigue. 2004;26:221–229.
   Web of Science ®Google Scholar
• Morabito AE, Chrysochoos A, Dattoma V, et al. Analysis of heat sources accompanying the fatigue of 2024 T3 aluminium alloys. Int J Fatigue. 2007;29:977–984.
   Web of Science ®Google Scholar
• Meneghetti G. Analysis of the fatigue strength of a stainless steel based on the energy dissipation. Int J Fatigue. 2007;29:81–94.
   Web of Science ®Google Scholar
• Mehdizadeh M, Haghshenas A, Khonsari MM. In-situ technique for fatigue life prediction of metals based on temperature evolution. Int J Mech Sci. 2021;192:106113.
   Web of Science ®Google Scholar
• Palumbo D, Galietti U. thermoelastic phase analysis (TPA): a new method for fatigue behaviour analysis of steels. Fatigue Fract Eng Mater Struct. 2017;40:523–534.
   Web of Science ®Google Scholar
• La Rosa G, Risitano A. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components. Int J Fatigue. 2000;22:65–73.
   Web of Science ®Google Scholar
• Cugy P, Galtier A. Microplasticity and temperature increase in low carbon steels. In: Proc the eighth international fatigue congress (Fatigue 2002); Stockholm, Sweden; 2002; p. 549–556.
   Google Scholar
• Shiozawa D, Inaba K, Akai A, et al. Experimental study of relationship between energy dissipation and fatigue damage from observation of slip band by atomic force microscope. Adv Mater Res. 2014;891–892:606–611.
   Google Scholar
• Shiozawa D, Akai A, Inaba K, et al. Relationship between dissipated energy and growth behavior of slip bands in austenitic stainless steel. In: Proc the 10th Asia-Pacific conference on fracture and strength (APCFS 2016); Toyama, Japan; 2016; p. 223–224.
   Google Scholar
• Akai A, Shiozawa D, Yamada T, et al. Energy dissipation measurement in improved spatial resolution under fatigue loading. Exp Mech. 2020;60:181–189.
   Web of Science ®Google Scholar
• Amiri M, Khonsari MM. Rapid determination of fatigue failure based on temperature evolution: fully reversed bending load. Int J Fatigue. 2010;32:382–389.
   Web of Science ®Google Scholar
• Amiri M, Khonsari MM. Life prediction of metals undergoing fatigue load based on temperature evolution. Mater Sci Eng A. 2010;527:1555–1559.
   Web of Science ®Google Scholar
• Jiang L, Wang H, Liaw PK, et al. Characterization of the temperature evolution during high-cycle fatigue of the ULTIMET superalloy: experiment and theoretical modeling. Metall Mater Trans A. 2001;32:2279–2296.
   Web of Science ®Google Scholar
• Yang B, Liaw PK, Morrison M, et al. Temperature evolution during fatigue damage. Intermetallics. 2005;13:419–428.
   Web of Science ®Google Scholar
• Huang Y, Li SX, Lin SE, et al. Using the method of infrared sensing for monitoring fatigue process of metals. Mater Eval. 1984;42:1020–1024.
   Web of Science ®Google Scholar
• Amiri M, Khonsari MM. Nondestructive estimation of remaining fatigue life: thermography technique. J Fail Anal Prev. 2012;12:683–688.
   Google Scholar
• Williams P, Liakat M, Khonsari MM, et al. A thermographic method for remaining fatigue life prediction of welded joints. Mater Des. 2013;51:916–923.
   Web of Science ®Google Scholar
• Liakat M, Naderi M, Khonsari MM, et al. Nondestructive testing and prediction of remaining fatigue life of metals. J Nondestruct Eval. 2014;33:309–316.
   Web of Science ®Google Scholar
• Feltner CE, Morrow JD. Microplastic strain hysteresis energy as a criterion for fatigue fracture. J Basic Eng. 1961;83:15–22.
   Google Scholar
• Guo Q, Guo X, Fan J, et al. An energy method for rapid evaluation of high-cycle fatigue parameters based on intrinsic dissipation. Int J Fatigue. 2015;80:136–144.
   Web of Science ®Google Scholar
• Yang W, Guo X, Guo Q, et al. Rapid evaluation for high-cycle fatigue reliability of metallic materials through quantitative thermography methodology. Int J Fatigue. 2019;124:461–472.
   Web of Science ®Google Scholar
• Fargione G, Geraci A, La Rosa G, et al. Rapid determination of the fatigue curve by the thermographic method. Int J Fatigue. 2002;24:11–19.
   Web of Science ®Google Scholar
• Wang XG, Crupi V, Guo XL, et al. Quantitative thermographic methodology for fatigue assessment and stress measurement. Int J Fatigue. 2010;32:1970–1976.
   Web of Science ®Google Scholar
• Risitano A, Risitano G. Cumulative damage evaluation of steel using infrared thermography. Theor Appl Fract Mech. 2010;54:82–90.
   Web of Science ®Google Scholar
• Risitano A, Risitano G. Cumulative damage evaluation in multiple cycle fatigue tests taking into account energy parameters. Int J Fatigue. 2013;48:214–222.
   Web of Science ®Google Scholar
• Crupi V, Guglielmino E, Maestro M, et al. Fatigue analysis of butt welded AH36 steel joints: thermographic method and design S–N curve. Mar Struct. 2009;22:373–386.
   Web of Science ®Google Scholar
• Fan JL, Guo XL, Wu CW, et al. Research on fatigue behavior evaluation and fatigue fracture mechanisms of cruciform welded joints. Mater Sci Eng A. 2011;528:8417–8427.
   Web of Science ®Google Scholar
• Yang W, Fan J, Guo Q, et al. Experimental procedure for energy dissipation estimation during high-cycle fatigue loading of metallic material. Exp Mech. 2020;60:695–712.
   Web of Science ®Google Scholar
• Luong MP. Fatigue limit evaluation of metals using an infrared thermographic technique. Mech Mater. 1998;28:155–163.
   Web of Science ®Google Scholar
• Curà F, Gallinatti AE, Sesana R. Dissipative aspects in thermographic methods. Fatigue Fract Eng Mater Struct. 2012;35:1133–1147.
   Web of Science ®Google Scholar
• Maquin F, Pierron F. Heat dissipation measurements in low stress cyclic loading of metallic materials: from internal friction to micro-plasticity. Mech Mater. 2009;41:928–942.
   Web of Science ®Google Scholar
• Haghshenas A, Jang JY, Khonsari MM. On the intrinsic dissipation and fracture fatigue entropy of metals. Mech Mater. 2021;155:103734.
   Web of Science ®Google Scholar
• Jang JY, Khonsari MM. On the evaluation of fracture fatigue entropy. Theor Appl Fract Mech. 2018;96:351–361.
   Web of Science ®Google Scholar
• Naderi M, Amiri M, Khonsari MM. On the thermodynamic entropy of fatigue fracture. Proc R Soc A. 2010;466:423–438.
   Google Scholar
• Mehdizadeh M, Khonsari MM. On the role of internal friction in low-and high-cycle fatigue. Int J Fatigue. 2018;114:159–166.
   Web of Science ®Google Scholar
• Mehdizadeh M, Haghshenas A, Khonsari MM. On the effect of internal friction on torsional and axial cyclic loading. Int J Fatigue. 2021;145:106113.
   Web of Science ®Google Scholar
• Hayabusa K, Inaba K, Ikeda H, et al. Estimation of fatigue limits from temperature data measured by IR thermography. Exp Mech. 2017;57:185–194.
   Web of Science ®Google Scholar
• Goto M, Nishitani H, Miyagawa H, et al. Fatigue damage of heat-treated 0.45%C steel smooth specimens under two-step loading. JSME Int J Ser 1. 1990;33:249–255.
   Web of Science ®Google Scholar
• Zhu SP, Huang HZ, Wang ZL. Fatigue life estimation considering damaging and strengthening of low amplitude loads under different load sequences using fuzzy sets approach. Int J Damage Mech. 2011;20:876–899.
   Web of Science ®Google Scholar
• Jiang C, Liu X, Zhang M, et al. An improved nonlinear cumulative damage model for strength degradation considering loading sequence. Int J Damage Mech. 2021;30:415–430.
   Web of Science ®Google Scholar
• Gope PC, Mahar CS. Evaluation of fatigue damage parameters for Ni-based super alloys Inconel 825 steel notched specimen using stochastic approach. Fatigue Fract Eng Mater Struct. 2021;44:427–443.
   Web of Science ®Google Scholar
• Kurek M, Łagoda T. Fatigue damage cumulation in materials under random loading based on an energy model. Fatigue Fract Eng Mater Struct. 2021;44:1114–1124.
   Web of Science ®Google Scholar
• Liu Y, Ye N, Hu X, et al. An improved fatigue damage model based on the virtual load spectrum of golden section method. Fatigue Fract Eng Mater Struct. 2021;44:2101–2118.
   Web of Science ®Google Scholar
• Farag MM, El-Kady RM, Hammouda MMI. Cracking simulation-based cumulative fatigue damage assessment. Fatigue Fract Eng Mater Struct. 2021;44:2186–2201.
   Web of Science ®Google Scholar
• Jang J, Khonsari MM. On the prediction of fatigue life subjected to variable loading sequence. Fatigue Fract Eng Mater Struct. 2021;44:2962–2974.
   Web of Science ®Google Scholar
• Duyi Y, Zhenlin W. A new approach to low-cycle fatigue damage based on exhaustion of static toughness and dissipation of cyclic plastic strain energy during fatigue. Int J Fatigue. 2001;23:679–687.
   Web of Science ®Google Scholar
• Liakat M, Khonsari MM. An experimental approach to estimate damage and remaining life of metals under uniaxial fatigue loading. Mater Des. 2014;57:289–297.
   Web of Science ®Google Scholar
• Jang JY, Mehdizadeh M, Khonsari MM. Nondestructive estimation of remaining fatigue life without the loading history. Int J Damage Mech. 2020;29:482–502.
   Web of Science ®Google Scholar
• Salimi H, Pourgol-Mohammad M, Yazdani M. Metal fatigue assessment based on temperature evolution and thermodynamic entropy generation. Int J Fatigue. 2019;127:403–416.
   Web of Science ®Google Scholar