Synthesis and characterization of long carbon chain polyamide 1012 modified polyamide 6 via melt copolymerization

References

• Bakkali-Hassani, C.; Tunc, D.; Roos, K.; Planes, M.; Lecomte, P.; Carlotti, S. Simultaneous Anionic Ring-Opening and Condensation Reactions for the Synthesis of Aliphatic–N-Alkyl Aromatic Copolyamides. Macromolecules 2017, 50, 175–181. DOI: 10.1021/acs.macromol.6b01592.
   Web of Science ®Google Scholar
• Kim, H.; Oh, K.; Seo, Y. Rheological and Mechanical Properties of a Novel Polyamide 6 Synthesized by Anionic Polymerization of ε-Caprolactam in a Twin-Screw Extruder. Polymer 2019, 177, 196–201. DOI: 10.1016/j.polymer.2019.06.008.
   Web of Science ®Google Scholar
• Lorenzo, D.; Romero, A.; Del-Arco, L.; Santos, A. Linear Amides in Caprolactam from Linear Ketone Impurities in Cyclohexanone Obtained from Cyclohexane: Kinetics and Identification. Ind. Eng. Chem. Res. 2019, 58, 11878–11890. DOI: 10.1021/acs.iecr.9b01997.
   Web of Science ®Google Scholar
• Li, D.; Liu, Q.; Yu, L.; Li, X.; Zhang, Z. Correlation Between Interfacial Interactions and Mechanical Properties of PA-6 Doped with Surface-Capped Nano-Silica. Appl. Surf. Sci. 2009, 255, 7871–7877. DOI: 10.1016/j.apsusc.2009.04.121.
   Web of Science ®Google Scholar
• Jeon, S.; Karkhanechi, H.; Fang, L.; Cheng, L.; Ono, T.; Nakamura, R.; Matsuyama, H. Novel Preparation and Fundamental Characterization of polyamide6 Self-Supporting Hollow Fiber Membranes via Thermally Induced Phase Separation (TIPS.) J. Membr. Sci. 2018, 546, 1–14. DOI: 10.1016/j.memsci.2017.10.008.
   Web of Science ®Google Scholar
• Parodi, E.; Govaert, L. E.; Peters, G. W. M. Glass Transition Temperature Versus Structure of Polyamide 6: A Flash-DSC Study. Thermochim. Acta 2017, 657, 110–122. DOI: 10.1016/j.tca.2017.09.021.
   Web of Science ®Google Scholar
• Banerjee, S. S.; Janke, A.; Gohs, U.; Heinrich, G. Electron-Induced Reactive Processing of Polyamide 6/Polypropylene Blends: Morphology and Properties. Euro. Polym. J 2018, 98, 295–301. DOI: 10.1016/j.eurpolymj.2017.11.030.
   Web of Science ®Google Scholar
• Karami, P.; Shojaei, A. Improvement of Dry Sliding Tribological Properties of Polyamide 6 Using Diamond Nanoparticles. Tribol. Int. 2017, 115, 370–377. DOI: 10.1016/j.triboint.2017.06.003.
   Web of Science ®Google Scholar
• Lai, C.; Chen, S.; Chen, M.; Chen, H.; Hsiao, H.; Liu, L.; Chen, C. Preparation and Characterization of Heterocyclic Polyamide 6 (PA 6) with High Transparencies and Low Hygroscopicities. J. Mol. Struct. 2019, 1175, 836–843. DOI: 10.1016/j.molstruc.2018.08.032.
   Web of Science ®Google Scholar
• Budín, J.; Roda, J.; Brožek, J.; Kříř, J. Anionic Copolymerization of ε-Caprolactam With ω-Laurolactam. Macromol. Symp. 2006, 240, 78–82. DOI: 10.1002/masy.200650810.
   Google Scholar
• Salunkhe, P. H.; Patil, Y. S.; Kadam, V. N.; Mahindrakar, J. N.; Ubale, V. P.; Ghanwat, A. A. Synthesis and Characterization of Processable Polyamides Containing Polar Quinoxaline Unit in the Main Chain and Evaluation of Its Hydrophilicity. J. Macromol. Sci. A 2019, 56, 299–305. DOI: 10.1080/10601325.2019.1569469.
   Web of Science ®Google Scholar
• Çakır, S.; Eriksson, M.; Martinelle, M.; Koning, C. E. Multiblock Copolymers of Polyamide 6 and Diepoxypropylene Adipate Obtained by Solid State Polymerization. Eur. Polym. J. 2016, 79, 13–22. DOI: 10.1016/j.eurpolymj.2016.04.009.
   Web of Science ®Google Scholar
• Bouchékif, H.; Tunc, D.; Le Coz, C.; Deffieux, A.; Desbois, P.; Carlotti, S. Controlled Synthesis of Crosslinked Polyamide 6 Using a Bis-Monomer Derived from Cyclized Lysine. Polymer 2014, 55, 5991–5997. DOI: 10.1016/j.polymer.2014.09.050.
   Web of Science ®Google Scholar
• Yang, S.; Zhao, J.; Zhao, J.; Zhang, J. Cross-Linked Polyamides Prepared through Direct Bulk Michael Addition and Polycondensation from 1,6-Hexanediamine and Methyl Acrylate. Chin. J. Polym. Sci. 2020, 38, 143–150. DOI: 10.1007/s10118-019-2332-y.
   Web of Science ®Google Scholar
• Porubská, M.; Szöllös, O.; Janigová, I.; Jomová, K.; Chodák, I. Crosslinking of Polyamide-6 Initiated by Proton Beam Irradiation. Radiat. Phys. Chem. 2017, 133, 52–57. DOI: 10.1016/j.radphyschem.2016.12.010.
   Web of Science ®Google Scholar
• Kazemi, Y.; Kakroodi, A. R.; Mark, L. H.; Filleter, T.; Park, C. B. Effects of Polymer-Filler Interactions on Controlling the Conductive Network Formation in Polyamide 6/multi-Walled Carbon Nanotube Composites. Polymer 2019, 178, 121684. DOI: 10.1016/j.polymer.2019.121684.
   Web of Science ®Google Scholar
• Kuram, E. Micro-Machinability of Injection Molded Polyamide 6 Polymer and Glass-Fiber Reinforced Polyamide 6 Composite. Compos. B. Eng 2016, 88, 85–100.
   Web of Science ®Google Scholar
• Feldman, D. Polyamide Nanocomposites. J.Macromol. Sci. A 2017, 54, 255–262. DOI: 10.1080/10601325.2017.1282700.
   Web of Science ®Google Scholar
• Guerrica-Echevarría, G.; Eguiazábal, J. I.; Nazábal, J. Water Sorption in Polyamide 6/Poly(Amino-Ether) Blends. I. Sorption Characteristics and Phase Behavior. J.Macromol. Sci. A 2003, 40, 557–569. DOI: 10.1081/MA-120020853.
   Web of Science ®Google Scholar
• Wang, Z.; Lin, N.; Kang, H.; Hao, X.; Liu, R. Miscibility, Crystallization and Properties of Bio-Based Polyamide 56/Polyamide 6 Blends. Polymer 2023, 265, 125603. DOI: 10.1016/j.polymer.2022.125603.
   Web of Science ®Google Scholar
• Liu, F.; McAuley, K. B. Improved Kinetic Rate Constants for Nylon 6, Nylon 6, 6, and Nylon 6/6, 6 Copolymer. Macromol. React. Eng. 2020，1, 1900037. DOI: 10.1002/mren.201900037
   Web of Science ®Google Scholar
• Tang, J.; Xu, B.; Xi, Z.; Pan, X.; Zhao, L. Controllable Crystallization Behavior of Nylon-6/66 Copolymers Based on Regulating Sequence Distribution. Ind. Eng. Chem. Res. 2018, 57, 15008–15019. DOI: 10.1021/acs.iecr.8b02671.
   Web of Science ®Google Scholar
• Venkataramani, S.; Lee, J. H.; Park, M. G.; Kim, S. C. Structure and Properties of Polyamide-6 & 6/66 Clay Nanocomposites. J. Macromol. Sci. A 2008, 46, 65–73. DOI: 10.1080/10601320802515399.
   Web of Science ®Google Scholar
• Chen, Y.; Lee, Y.; Rwei, S. Synthesis and Characterization of Trace Aromaticcopolyamide 6 with Tunable Mechanical Andviscoelastic Behavior. J. Appl. Polym. Sci. 2022, 139, 51649.
   Google Scholar
• Rwei, S.; Ranganathan, P.; Chiang, W.; Lee, Y. Synthesis of Low Melting Temperature Aliphatic-Aromatic Copolyamides Derived fromNovel Bio-Based Semi Aromatic Monomer. Polymers 2018, 10, 793–798. DOI: 10.3390/polym10070793.
   PubMed Web of Science ®Google Scholar
• Álvarez-Láinez, M. L.; Palacio R, J. A. Correlations Between Thermal and Tensile Behavior With Friction Coefficient Incopolyamides 6/12. Wear 2017, 372-373, 76–80. DOI: 10.1016/j.wear.2016.11.018.
   Web of Science ®Google Scholar
• Kehayoglou, A. H. Anionic Copolymers of Caprolactam with Laurolactam (Nylon 6/12 Copolymers) I: Preparation and General Properties. Eur. Polym. J. 1983, 19, 183–188. DOI: 10.1016/0014-3057(83)90124-6.
   Web of Science ®Google Scholar
• Goodman, I.; Kehayoglou, A. H. Anionic Copolymers of Caprolactam with Laur- Olactam (Nylon 6/12 Copolymers) II. Eur. Polym. J. 1983, 19, 321–325. DOI: 10.1016/0014-3057(83)90167-2.
   Web of Science ®Google Scholar
• Wang, B.; Hu, G.; Zhao, X.; Gao, F. Preparation and Characterization of Nylon 6 11 Copolymer. Mater. Lett. 2006, 60, 2715–2717. DOI: 10.1016/j.matlet.2006.01.076.
   Web of Science ®Google Scholar
• Zierdt, P.; Mitzner, E.; Gomoll, A.; Theumer, T.; Lieske, A. Synthesis of Polyamide 6/11 Copolymers and Their Use as Matrix Polymer in Wood-Plastic Composites. J. Appl. Polym. Sci 2016, 133, 44155.
   Web of Science ®Google Scholar
• Li, Y.; Zhang, G.; Zhu, X.; Yan, D. Isothermal and Nonisothermal Crystallization Kinetics of Partially Melting Nylon 1012. J. Appl. Polym. Sci. 2003, 88, 1311–1319. DOI: 10.1002/app.11811.
   Web of Science ®Google Scholar
• Kricheldorf, H. R.; Mühlhaupt, R. 13C-Nmr-Sequenzanalyse 7. Aliphatische Homo- Und Copolyamide Des Nylon-6.6 Typs. Angew. Makromol. Chem. 1977, 65, 169–182. DOI: 10.1002/apmc.1977.050650112.
   Google Scholar
• Aerdts, A. M.; Eersels, K. L. L.; Groeninckx, G. Transamidation in Melt-Mixed Aliphatic and Aromatic Polyamides. 1. Determination of the Degree of Randomness and Number-Average Block Length by Means of 13C NMR. Macromolecules 1996, 29, 1041–1045. DOI: 10.1021/ma9507857.
   Web of Science ®Google Scholar
• Liu, M.; Li, K.; Yang, S.; Fu, P.; Wang, Y.; Zhao, Q. Synthesis and Thermal Decomposition of Poly(Dodecamethyleneterephthalamide). J. Appl. Polym. Sci. 2011, 122, 3369–3376. DOI: 10.1002/app.34416.
   Web of Science ®Google Scholar
• Wang, Z.; Wei, T.; Xue, X.; He, M.; Xue, J.; Song, M.; Wu, S.; Kang, H.; Zhang, L.; Jia, Q. Synthesis of Fully Bio-Based Polyamides with Tunable Properties by Employing Itaconic Acid. Polymer 2014, 55, 4846–4856. DOI: 10.1016/j.polymer.2014.07.034.
   Web of Science ®Google Scholar
• Novitsky, T. F.; Lange, C. A.; Mathias, L. J.; Osborn, S.; Ayotte, R.; Manning, S. Eutectic Melting Behavior of Polyamide 10,T-co-6,T and 12,T-co-6,T Copolyterephthalamides. Polymer 2010, 51, 2417–2425. DOI: 10.1016/j.polymer.2010.03.045.
   Web of Science ®Google Scholar
• Wu, Q.; Liu, X.; Berglund, L. A. An Unusual Crystallization Behavior in Polyamide 6/Montmorillonite Nanocomposites. Macromol. Rapid Commun. 2001, 22, 1438–1440. DOI: 10.1002/1521-3927(20011101)22:17<1438::AID-MARC1438>3.0.CO;2-U.
   Web of Science ®Google Scholar
• Lin, C.; Zou, F.; Fernández-Ronco, M. P.; Yan, Y.; Hufenus, R. Melting Behavior and Non-Isothermal Crystallization Kinetics of Copolyamide 6/12. Polym.Cryst 2019, 2, 10054.
   Google Scholar
• Liang, Z.; Pan, P.; Zhu, B.; Inoue, Y. Isomorphic Crystallization of Poly(Hexamethyleneadipate-co-Butyleneadipate): Regulating Crystal Modification of Polymorphic Polyester from Internal Crystalline Lattice. Macromolecules 2010, 43, 6429–6437. DOI: 10.1021/ma1008989.
   Google Scholar
• Zhang, C. Progress in Semicrystalline Heat-Resistant Polyamides. E-Polymers 2018, 18, 373–408. DOI: 10.1515/epoly-2018-0094.
   Web of Science ®Google Scholar