Capacity of double-plate vertically loaded anchor in saturated marine fine sand

References

• Aslkhalili, A., H. Shiri, and S. Zendehboudi. 2020. “Reliability Assessment of Dragembedment Anchors in Sand and the Effect of Idealized Anchor Geometry.” Safety in Extreme Environments 2 (1): 37–55. doi:10.1007/s42797-020-00018-6.
   Google Scholar
• Aubeny, C. A., and C. M. B. Chi. 2014. “Analytical Model for Vertically Loaded Anchor Performance.” Journal of Geotechnical and Geoenvironmental Engineering 140 (1): 14–24. doi:10.1061/(ASCE)GT.1943-5606.0000979.
   Web of Science ®Google Scholar
• Bienen, B., C. Gaudin, and M. J. Cassidy. 2012a. “Numerical Modeling of a Hybrid Skirted Foundation under Combined Loading.” Computers and Geotechnics 45: 127–139. doi:10.1016/j.compgeo.2012.05.009.
   Web of Science ®Google Scholar
• Bienen, B., C. Gaudin, M. J. Cassidy, L. Rausch, and O. Purwana. 2012b. “Numerical Modeling of Undrained Capacity of Hybrid Skirted Foundation under Combined Loading.” International Journal of Offshore and Polar Engineering 22 (4): 323–329.
   Web of Science ®Google Scholar
• Bransby, M. F., and M. P. O’Neill. 1999. “Drag Anchor Fluke-Soil Interaction in Clays.” International Symposium on Numerical Models in Geomechanics (NUMOG VII), Balkema, Graz, Austria, 489–494.
   Google Scholar
• Chen, W. F. 1975. Limit Analysis and Soil Plasticity. Amsterdam, The Netherlands: Elsevier Publishing Co.
   Google Scholar
• Cheng, X. L., Y. F. Li, P. G. Wang, Z. X. Liu, and Y. D. Zhou. 2020. “Model Tests and Finite Element Analysis for Vertically Loaded Anchors Subjected to Cyclic Loads in Soft Clays.” Computers and Geotechnics 119: 103317. doi:10.1016/j.compgeo.2019.103317.
   Web of Science ®Google Scholar
• Cong, B. L., Z. T. Wang, A. H. C. Chan, and Q. Yang. 2017. “Analytical Model for Vertically Loaded Anchor Performance with a Bridle Shank.” Computers and Geotechnics 82: 85–98. doi:10.1016/j.compgeo.2016.09.012.
   Web of Science ®Google Scholar
• Das, B. M., R. Moreno, and K. F. Dallo. 1986. “Ultimate Pullout Capacity of Shallow Vertical Anchors in Clay.” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts 25 (2): 148–152. doi:10.1016/0148-9062(86)91827-9.
   Google Scholar
• Das, B. M., and V. K. Puri. 1989. “Holding Capacity of Inclined Square Plate Anchors in Clay.” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts 29 (3): 138–144. doi:10.1016/0148-9062(90)94638-A.
   Google Scholar
• Det Norshke Veritas (DNV). 2002. “Design and Installation of Plate Anchors in Clay.” Recommended Practice RP-E302. DNV RP-E302.
   Google Scholar
• Elkhatib, S., and M. F. Randolph. 2005. “The effect of interface friction on the performance of drag-in plate anchors.” Proceeding of the 5th International Symposium on Frontiers in Offshore Geotechnics, Perth. doi:10.1201/noe0415390637.ch9.
   Google Scholar
• Han, C., D. Wang, C. Gaudin, C. D. O’Loughlin, and M. J. Cassidy. 2016. “Behaviour of Vertically Loaded Plate Anchors under Sustained Uplift.” Géotechnique 66 (8): 681–693. doi:10.1680/jgeot.15.P.232.
   Web of Science ®Google Scholar
• Kelly, R. B., G. T. Houlsby, and B. W. Byrne. 2006. “A Comparison of Field and Laboratory Tests of Caisson Foundations in Sand and Clay.” Géotechnique 56 (9): 617–626. doi:10.1680/geot.2006.56.9.617.
   Web of Science ®Google Scholar
• Lai, Y., B. Zhu, Y. H. Huang, and C. Chen. 2020. “Behaviors of Dragembedment Anchor in Layered Clay Profles.” Applied Ocean Research 101: 102287. doi:10.1016/j.apor.2020.102287.
   Web of Science ®Google Scholar
• Le, C. H., and S. R. Kim. 2012. “Evaluation of Vertical and Horizontal Bearing Capacities of Bucket Foundations in Clay.” Ocean Engineering 52: 75–82. doi:10.1016/j.oceaneng.2012.06.001.
   Web of Science ®Google Scholar
• Li, D. Y., Y. K. Zhang, L. Y. Feng, and Y. F. Gao. 2015. “Capacity of Modified Suction Caissons in Marine Sand under Static Horizontal Loading.” Ocean Engineering 102: 1–16. doi:10.1016/j.oceaneng.2015.04.033.
   Web of Science ®Google Scholar
• Liu, H. X., Y. Liu, H. T. Yang, W. Zhang, and C. L. Liu. 2010a. “Analytical Study on the Ultimate Embedment Depth of Drag Anchors.” Ocean Engineering 37 (14–15), 1292–1306.
   Web of Science ®Google Scholar
• Liu, H. X., W. Zhang, X. W. Zhang, and C. L. Liu. 2010b. “Experimental Investigation on the Penetration Mechanism and Kinematic Behavior of Draganchors.” Applied Ocean Research 32 (4): 434–442. doi:10.1016/j.apor.2010.09.004.
   Web of Science ®Google Scholar
• Luke, A. M., A. F. Rauch, R. E. Olson, and E. C. Mecham. 2005. “Components of Suction Caisson Capacity Measured in Axial Pullout Tests.” Ocean Engineering 32 (7): 878–891. doi:10.1016/j.oceaneng.2004.10.007.
   Web of Science ®Google Scholar
• Murff, J. D., M. F. Randolph, S. Elkhatib, H. J. Kolk, R. M. Ruinen, P. J. Strom, and C. P. Thorne. 2005. “Vertically Loaded Plate Anchors for Deepwater Applications.” In Proceedings of the First International Symposium on Frontiers in Offshore Geotechnics, University of Western Australia.
   Google Scholar
• Neubecker, S. R., and M. F. Randolph. 1995. “Profile and Frictional Capacity of Embedded Anchor Chain.” Journal of the Geotechnical Engineering Division, ASCE 121 (11): 787–803.
   Google Scholar
• Neubecker, S. R., and M. F. Randolph. 1996. “The Performance of Drag Anchor and Chain Systems in Cohesive Soil.” Marine Georesources & Geotechnology 14 (2): 77–96. doi:10.1080/10641199609388305.
   Web of Science ®Google Scholar
• O’Neill, M. P., M. F. Bransby, and M. F. Randolph. 2003. “Drag Anchor Fluke-Soil Interaction in Clays.” Canadian Geotechnical Journal 40 (1): 78–94. doi:10.1139/t02-096.
   Web of Science ®Google Scholar
• Qiao, D. S., M. R. Bao, J. Yan, D. C. Zhao, and Y. G. Li. 2018. “A Method to Predict Embedded Trajectory Based on the Finite Element Analyses of Bearing Capacity of Draganchor.” In Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. doi:10.1115/OMAE2018-77167.
   Google Scholar
• Randolph, M. F., M. J. Cassidy, and Y. Tian. 2015. “Analytical Solution for Ultimate Embedment Depth and Potential Holding Capacity of Plate Anchors.” Géotechnique 65 (6): 517–530. doi:10.1680/geot.14.P.228.
   Web of Science ®Google Scholar
• Randolph, M. F., S. Elkhatib, M. Cassidy, and S. Gourvenec. 2005. “The Effect of Interface Friction on the Performance of Drag-in Plate Anchors.” In Frontiers in Offshore Geotechnics doi:10.1201/noe0415390637.ch9.
   Google Scholar
• Ruinen, R., and G. Degenkamp. 2001. “Anchor Selection and Installation for Shallow and Deepwater Mooring Systems.” In 11th International Offshore and Polar Engineering Conference, International Society of Offshore and Polar Engineers.
   Google Scholar
• Shen, K. M. 2017. Performance of Offshore Mooring Systems during Installation and in Service. Zhejiang: Zhejiang University.
   Google Scholar
• Thorne, C. P. 1998. “Penetration and Load Capacity of Marine Draganchors in Soft Clay.” Journal of Geotechnical and Geoenvironmental Engineering 124 (10): 945–953. doi:10.1061/(ASCE)1090-0241(1998)124:10(945).
   Web of Science ®Google Scholar
• Tian, Y., M. F. Randolph, and M. J. Cassidy. 2015. “Analytical solution for ultimate embedment depth and potential holding capacity of plate anchors.” Géotechnique 65(6): 517–530. doi:10.1680/geot.14.P.228
   Google Scholar
• Vryhof Anchors. 1990. Anchor Manual. Krimpen Ad Yssel, The Netherlands.
   Google Scholar
• Wang, L. Z., K. M. Shen, L. L. Li, and Z. Guo. 2014. “Integrated Analysis of Dragembedment Anchor Installation.” Ocean Engineering 88: 149–163. doi:10.1016/j.oceaneng.2014.06.028.
   Web of Science ®Google Scholar
• Xing, G. Q., W. Xuan, and B. Zhang. 2020. Towed Embedded Double-Layer Flat Plate Bearing Anchor. State Intellectual Property Office of the P.R. China. ZL201910259959.x.
   Google Scholar
• Yang, M., J. D. Murff, and C. P. Aubeny. 2010. “Undrained Capacity of Plate Anchors under General Loading.” Journal of Geotechnical and Geoenvironmental Engineering 136 (10): 1383–1393. doi:10.1061/(ASCE)GT.1943-5606.0000343.
   Web of Science ®Google Scholar
• Zace Services Ltd. 2011. Zsoil.Pc2011 Manual. Lausanne, Switzerland: Elmepress International.
   Google Scholar
• Zhang, Y. K., Y. F. Gao, D. Y. Li, and A. H. Mahfouz. 2016. “H-M Bearing Capacity of a Modified Suction Caisson Determined by Using Load-/Displacement-Controlled Methods.” Chinese Ocean Engineering 30 (6): 926–941.
   Web of Science ®Google Scholar
• Zhao, Y. B. 2016. Numerical and Theoretical Study of Complex Kinematic Behaviors of Deepwater Anchors in Marine Clay. Tianjin: Tianjin University.
   Google Scholar