Management of waste lubricant oil in Europe: A circular economy approach

References

• Abdalla, N., & Fehrenbach, H. (2017). Updating the study Ecological and energetic assessment of re-refining waste oils to base oils Substitution of primarily produced base oils including semi-synthetic and synthetic compounds. ifeu – Institut für Energie. https://bva-altoelrecycling.de/files/uploads/2017/10/oekobilanz_ifeu_2017.pdf
   Google Scholar
• APA. (2015). Especificações Técnicas dos Óleos Usados. https://www.apambiente.pt/_zdata/Politicas/Residuos/FluxosEspecificosResiduos/OU/Especific%0Aacoes_Tecnicas_Oleos_usados-Aprovado.pdf
   Google Scholar
• Arpa, O., Yumrutas, R., & Demirbas, A. (2010). Production of diesel-like fuel from waste engine oil by pyrolitic distillation. Applied Energy, 87(1), 122–127. doi:10.1016/j.apenergy.2009.05.042
   Web of Science ®Google Scholar
• ATSDR. (2007). Toxicological profile for lead. https://www.atsdr.cdc.gov/toxprofiles/tp13.pdf
   Google Scholar
• Audibert, F. (2003). Les huiles usagées: Reraffinage et valorisation énergétique. Edition Technip.
   Google Scholar
• Audibert, F. (2006). Waste engine oils: Rerefining and energy recovery. Elsevier.
   Google Scholar
• Awaja, F., & Pavel, D. (2006). Design aspects of used lubricating oil re-refining. Elsevier.
   Google Scholar
• Battersby, N. S. (2000). The biodegradability and microbial toxicity testing of lubricants-some recommendations. Chemosphere, 41(7), 1011–1027. doi:10.1016/S0045-6535(99)00517-2
   PubMed Web of Science ®Google Scholar
• Benda, R., Bullen, J., & Plomer, A. (1996). Synthetics basics: Polyalphaolefins — base fluids for high-performance lubricants. Journal of Synthetic Lubrication, 13(1), 41–57. doi:10.1002/jsl.3000130105
   Google Scholar
• Borza, M., Leoncini, S., & Modenesi, A. (1983). Spent oil recovery process (U.S. Patent No. 4406778 A). U.S. Patent and Trademark Office.
   Google Scholar
• Botas, J. A., Moreno, J., Espada, J. J., Serrano, D. P., & Dufour, J. (2017). Recycling of used lubricating oil: Evaluation of environmental and energy performance by LCA. Resources, Conservation and Recycling, 125(1), 315–323. doi:10.1016/j.resconrec.2017.07.010
   Google Scholar
• Boughton, B., & Horvath, A. (2004). Environmental assessment of used oil management methods. Environmental Science & Technology, 38(2), 353–358. doi:10.1021/es034236p
   PubMed Web of Science ®Google Scholar
• Bronshteyn, L. A., & Kreiner, J. H. (1999). Energy efficiency of industrial oils. Tribology Transactions, 42(4), 771–4694. doi:10.1080/10402009908982281
   Web of Science ®Google Scholar
• Collins, M., Schiebel, K., Dyke, P. (2017). Life cycle assessment of used oil management. https://www.api.org/∼/media/Files/Certification/Engine-Oil-Diesel/Publications/LCA-of-Used-Oil-Mgmt-ERM-10012017.pdf
   Google Scholar
• Dang, G. S. (1997). Rerefining of used oils — a review of commercial processes. Tribotest, 3(4), 445–457. doi:10.1002/tt.3020030407
   Google Scholar
• Day, M., Bauer, C. (2007). Water contamination in hydraulic and lube systems. https://www.machinerylubrication.com/Read/1084/water-contamination-lube
   Google Scholar
• Deshpande, R. S., Sundaravadivelu, D., Techtmann, S., Conmy, R. N., Santo Domingo, J. W., & Campo, P. (2018). Microbial degradation of Cold Lake Blend and Western Canadian select dilbits by freshwater enrichments. Journal of Hazardous Materials, 352, 111–120. doi:10.1016/j.jhazmat.2018.03.030
   PubMed Web of Science ®Google Scholar
• ECHA. (2008). Support document for identification of alkanes, C10-13, chloro as a substance of very high concern. https://echa.europa.eu/documents/10162/2edcfedb-ec53-4754-8598-e787a8ff7a58
   Google Scholar
• El-Fadel, M., & Khoury, R. (2001). Strategies for vehicle waste-oil management: A case study. Resources, Conservation and Recycling, 33(2), 75–91. doi:10.1016/S0921-3449(01)00058-1
   Web of Science ®Google Scholar
• European Commission. (2017). Towards a circular economy - Waste management in the EU. http://www.europarl.europa.eu/RegData/etudes/STUD/2017/581913/EPRS_STU%282017%29581913_EN.pdf
   Google Scholar
• European Commission. (2018). Best available techniques (BAT) reference document for waste treatment industrial. Emissions Directive 2010/75/EU (Integrated Pollution Prevention and Control). European Commission.
   Google Scholar
• Eurostat. (2019). Treatment of waste by waste category, hazardousness and waste management operations. http://appsso.eurostat.ec.europa.eu
   Google Scholar
• Fuchs. (2017). Fuchs group - setting standards worldwide. https://www.fuchs.com/fileadmin/Home/Praesentation/2017/FUCHS_Investor_May.pdf
   Google Scholar
• Fuchs. (2018). Future challenges of the lubricants industry. https://www.fuchs.com/fileadmin/Home/Praesentation/2018/180618_FCMD_CTO.pdf
   Google Scholar
• Gary, J. G., Handwerk, G. E., & Kaiser, M. J. (2007). Petroleum refining: Technology and economics. (5th ed.). CRC Press.
   Google Scholar
• GEIR. (2004). An environmental review of waste oils regeneration. http://www.geir-rerefining.org/documents/PositionpaperGEIR161104.pdf
   Google Scholar
• GEIR. (2016). Waste framework directive revision: European waste oil re-refining industry position. https://www.geir-rerefining.org/wp-content/uploads/GEIRpositionpaperWFD_2016_FINAL.pdf
   Google Scholar
• Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017). The circular economy – A new sustainability paradigm? Journal of Cleaner Production, 143, 757–768. doi:10.1016/j.jclepro.2016.12.048
   Web of Science ®Google Scholar
• Ghisellini, P., Cialani, C., & Ulgiati, S. (2016). A review on circular economy: The expected transition to a balanced interplay of environmental and economic systems. Journal of Cleaner Production, 114, 11–32. doi:10.1016/j.jclepro.2015.09.007
   Web of Science ®Google Scholar
• Gregson, N., Crang, M., Fuller, S., & Holmes, H. (2015). Interrogating the circular economy: The moral economy of resource recovery in the EU. Economy and Society, 44(2), 218–243. doi:10.1080/03085147.2015.1013353
   Web of Science ®Google Scholar
• Gustavsson, F. (2013). Triboactive component coatings. Tribological testing and microanalysis of low-friction tribofilms [Doctoral Thesis]. Digitala Vetenskapliga Arkivet. Uppsala University. http://www.diva-portal.org/smash/record.jsf?pid=diva2%3A585099&dswid=1213
   Google Scholar
• Harnoy, A. (2003). Bearing design in machinery: Engineering tribology and lubrication. Marcel Dekker, Inc.
   Google Scholar
• Heshmati, A. (2015). A review of the circular economy and its implementation. Heshmati, Almas. IZA Discussion Paper No. 9611. https://ssrn.com/abstract=2713032
   Google Scholar
• Hsu, Y.-L., Lee, C.-H., & Kreng, V. B. (2009). Analysis and comparison of regenerative technologies of waste lubricant. WSEAS Transactions on Environment and Development, 5(3), 295–309.
   Google Scholar
• Hsu, Y. L., & Liu, C. C. (2011). Evaluation and selection of regeneration of waste lubricating oil technology. Environmental Monitoring and Assessment, 176(1-4), 197–212. doi:10.1007/s10661-010-1576-3
   PubMed Web of Science ®Google Scholar
• HIS Markit (2015). Synthetic lubricants - specialty chemicals update program. https://ihsmarkit.com/products/chemical-synthetic-lubricants-scup.html
   Google Scholar
• IARC. (2018). List of classifications, Volumes 1–120. http://monographs.iarc.fr/ENG/Classification/latest_classif.php
   Google Scholar
• Jafari, A. J., & Hassanpour, M. (2015). Analysis and comparison of used lubricants, regenerative technologies in the world. Resources, Conservation and Recycling, 103, 179–191. doi:10.1016/j.resconrec.2015.07.026
   Web of Science ®Google Scholar
• Jahromi, F. A., Kannan, N., Zakaria, M. P., & Aris, A. Z. (2014). Persistent contaminants in waste oils: A short review on PCBs and PAHs as main contaminants. In A. Z. Aris, T. H. Tengku Ismail, R. Harun, A. M. Abdullah, & M. Y. Ishak (Eds.), From sources to solution (pp. 107–110). Springer.
   Google Scholar
• Jhanani, S., & Joseph, K. (2011). Used oil generation and management in the automotive industries. International Journal of Environmental Sciences, 2(2), 638–648.
   Google Scholar
• John, R. C., Itah, A. Y., Essien, J. P., & Ikpe, D. I. (2011). Fate of nitrogen-fixing bacteria in crude oil contaminated wetland ultisol. Bulletin of Environmental Contamination and Toxicology, 87(3), 343–353. doi:10.1007/s00128-011-0320-1
   PubMed Web of Science ®Google Scholar
• Kajdas, C. (2014). Re-refining technologies. In T. Mang (Ed.), Encyclopedia of lubricants and lubrication (pp. 1554–1568). Springer-Verlag.
   Google Scholar
• Kalnes, T. N., Shonnard, D. R., & Schuppel, A. (2006). LCA of a spent lube oil re-refining process. Computer Aided Chemical Engineering, 21, 713–718. doi:10.1016/S1570-7946(06)80129-X
   Google Scholar
• Kanokkantapong, V., Kiatkittipong, W., Panyapinyopol, B., Wongsuchoto, P., & Pavasant, P. (2009). Used lubricating oil management options based on life cycle thinking. Resources, Conservation and Recycling, 53(5), 294–299. doi:10.1016/j.resconrec.2009.01.002
   Web of Science ®Google Scholar
• Kapoor, V., Li, X., Elk, M., Chandran, K., Impellitteri, C. A., & Santo Domingo, J. W. (2015). Impact of heavy metals on transcriptional and physiological activity of nitrifying bacteria. Environmental Science & Technology, 49(22), 13454–13462. doi:10.1021/acs.est.5b02748
   PubMed Web of Science ®Google Scholar
• Kapustina, V., & Horttanainen, M. (2016). A review of the existing waste oil management systems. Journal of Solid Waste Technology & Management, 42(1), 948–961.
   Google Scholar
• Kayode, J., Olowoyo, O., & Oyedeji, A. (2009). The effects of used engine oil pollution on the growth and early seedling performance of Vigna uniguiculata and Zea mays. Research Journal of Soil Biology, 1(1), 15–19. doi:10.3923/rjsb.2009.15.19
   Google Scholar
• Kentonm, K. J. (1998). Oil re-refining method and apparatus (U.S. Patent No. 5,759,385). U.S. Patent and Trademark Office.
   Google Scholar
• Kirchherr, J., Reike, D., & Hekkert, M. (2017). Conceptualizing the circular economy: An analysis of 114 definitions. Resources, Conservation and Recycling, 127, 221–232. doi:10.1016/j.resconrec.2017.09.005
   Web of Science ®Google Scholar
• Klamerus-Iwan, A., Błońska, E., Lasota, J., Kalandyk, A., & Waligórski, P. (2015). Influence of oil contamination on physical and biological properties of forest soil after chainsaw use. Water, Air, and Soil Pollution, 226(11), 389. doi:10.1007/s11270-015-2649-2
   PubMed Web of Science ®Google Scholar
• Kupareva, A., Mäki-Arvela, P., & Murzin, D. Y. (2013). Technology for rerefining used lube oils applied in Europe: A review. Journal of Chemical Technology & Biotechnology, 88(10), 1780–1793. doi:10.1002/jctb.4137
   Web of Science ®Google Scholar
• Laing, D., & Thomas, H. (2014). Food and pharma industry lubrication. In T. Mang (Ed.), Encyclopedia of lubricants and lubrication (pp. 645–679). Springer-Verlag.
   Google Scholar
• Lugt, P. M. (2013). Grease lubrication in rolling bearings. Wiley.
   Google Scholar
• Lynch, T. R. (2007). Process chemistry of lubricant base stocks. CRC Press.
   Google Scholar
• Madanhire, I., & Mbohwa, C. (2016). Mitigating environmental impact of petroleum lubricants. Springer.
   Google Scholar
• Magnabosco, L. M., & Rondeau, W. A. (1993). Improved process for the production of base stock oils from used oil (EP Patent No. 0574272 A2). European Patent Office.
   Google Scholar
• Mang, T., Bobzin, K., & Bartels, T. (2011). Industrial tribology: Tribosystems, friction, wear and surface engineering, lubrication. Wiley-VCH.
   Google Scholar
• Mang, T., & Dresel, W. (2017). Lubricants and lubrication. Wiley.
   Google Scholar
• Mannetje, L., & Laghate, A. (1990). Process for re-refining spent lube oils (U.S. Patent No. 4941967 A). U.S. Patent and Trademark Office.
   Google Scholar
• Minana, J., Schieppati, R., & Dalla, F. (1994). Process to re-refine used oils (EP Patent No. 0618959 A1). European Patent Office.
   Google Scholar
• Monier, V., Labouze, E. (2001). Critical review of existing studies and life cycle analysis on the regeneration and incineration of waste oils. http://ec.europa.eu/environment/waste/studies/oil/waste_oil.pdf
   Google Scholar
• Morkunas, I., Woźniak, A., Mai, V. C., Rucińska-Sobkowiak, R., & Jeandet, P. (2018). The role of heavy metals in plant response to biotic stress. Molecules, 23(9), 2320. doi:10.3390/molecules23092320
   PubMed Web of Science ®Google Scholar
• Mortier, R. M., Fox, M. F., & Orszulik, S. T. (2010). Chemistry and technology of lubricants (3rd ed.). Springer.
   Google Scholar
• Özbay, H. (2016). The effects of motor oil on the growth of three aquatic macrophytes. Acta Ecologica Sinica, 36(6), 504–508. doi:10.1016/j.chnaes.2016.08.005
   Google Scholar
• Parchomenko, A., Nelen, D., Gillabel, J., & Rechberger, H. (2019). Measuring the circular economy - A multiple correspondence analysis of 63 metrics. Journal of Cleaner Production, 210, 200–216. doi:10.1016/j.jclepro.2018.10.357
   Web of Science ®Google Scholar
• Pillai, I., Ritchie, L., Heywood, R., Wilson, G., Pahlavanpour, B., Setford, S., & Saini, S. (2005). Development of an improved analytical method for the determination of carcinogenic polycyclic aromatic hydrocarbons in transformer oil. Journal of Chromatography A, 1064(2), 205–212. doi:10.1016/j.chroma.2004.12.066
   PubMed Web of Science ®Google Scholar
• Pinheiro, C. T., Quina, M. J., Gando-Ferreira, L. M., & Cardoso, C. M. (2020). Effect of chemical additives on the regeneration of waste lubricant oil. In C. Vilarinho et al. (Ed.), Wastes: Solutions, treatments and opportunities (Vol. 3, pp. 13–18). CRC Press – Taylor & Francis Group. 
   Google Scholar
• Pinheiro, C. T., Ascensão, V. R., Cardoso, C. M., Quina, M. J., & Gando-Ferreira, L. M. (2017). An overview of waste lubricant oil management system: Physicochemical characterization contribution for its improvement. Journal of Cleaner Production, 150, 301–308. doi:10.1016/j.jclepro.2017.03.024
   Web of Science ®Google Scholar
• Pinheiro, C. T., Ascensão, V. R., Reis, M. S., Quina, M. J., & Gando-Ferreira, L. M. (2017). A data-driven approach for the study of coagulation phenomena in waste lubricant oils and its relevance in alkaline regeneration treatments. Science of the Total Environment, 599–600, 2054–2064. doi:10.1016/j.scitotenv.2017.05.124
   PubMed Web of Science ®Google Scholar
• Pinheiro, C. T., Pais, R. F., Quina, M. J., & Gando-Ferreira, L. M. (2018). Regeneration of waste lubricant oil with distinct properties by extraction-flocculation using green solvents. Journal of Cleaner Production, 200, 578–587. doi:10.1016/j.jclepro.2018.07.282
   Web of Science ®Google Scholar
• Pires, A., & Martinho, G. (2013). Life cycle assessment of a waste lubricant oil management system. The International Journal of Life Cycle Assessment, 18(1), 102–112. doi:10.1007/s11367-012-0455-2
   Web of Science ®Google Scholar
• Pirro, D. M., Daschner, E., & Wessol, A. A. (2001). Lubrication fundamentals (2nd ed.). CRC Press.
   Google Scholar
• Pöhler, J., Mödler, M., Bruhnke, D., & Hindenberg, H. (2004). Method for reprocessing waste oils (U.S. Patent No. 6712954 B1). U.S. Patent and Trademark Office.
   Google Scholar
• Ray, S., Rao, P. V. C., & Choudary, N. V. (2012). Poly-α-olefin-based synthetic lubricants: A short review on various synthetic routes. Lubrication Science, 24(1), 23–44. doi:10.1002/ls.166
   Web of Science ®Google Scholar
• Rizvi, S. Q. A. (2009). A comprehensive review of lubricant chemistry, technology, selection, and design. ASTM International.
   Google Scholar
• Robinson, P. R. (2006). Petroleum processing overview. In C. S. Hsu & P. R. Robinson (Eds.), Practical advances in petroleum processing (Vol. 1, pp. 1–76). Springer.
   Google Scholar
• Rudnick, L. (2013). Synthetics, mineral oils, and bio-based lubricants: Chemistry and technology. CRC Press.
   Google Scholar
• Rudnick, L., & Shubkin, R. (1999). Synthetic lubricants and high-performance functional fluids (2nd ed.). CRC Press.
   Google Scholar
• Salam, L. B. (2016). Metabolism of waste engine oil by Pseudomonas species. 3 Biotech, 6(1), 98. doi:10.1007/s13205-016-0419-5
   PubMedGoogle Scholar
• Sequeira, A. (1994). Lubricant base oil and wax processing. Marcel Dekker, Inc.
   Google Scholar
• Shankar, R., Jung, J. H., Loh, A., An, J. G., Ha, S. Y., & Yim, U. H. (2020). Environmental significance of lubricant oil: A systematic study of photooxidation and its consequences. Water Research, 168, 115183. doi:10.1016/j.watres.2019.115183
   PubMed Web of Science ®Google Scholar
• Speight, J. G. (2017). Environmental organic chemistry for engineers. Butterworth-Heinemann.
   Google Scholar
• Speight, J. G., & Exall, D. I. (2014). Rerefining of used lubricating oils. CRC Press.
   Google Scholar
• Srivastava, V., Sarkar, A., Singh, S., Singh, P., de Araujo, A. S. F., & Singh, R. P. (2017). Agroecological responses of heavy metal pollution with special emphasis on soil health and plant performances. Frontiers in Environmental Science, 5, 64. doi:10.3389/fenvs.2017.00064
   Web of Science ®Google Scholar
• Stachowiak, G. W., & Batchelor, A. W. (2014). Engineering tribology (4th ed.). Elsevier.
   Google Scholar
• Swigert, J. P., Lee, C., Wong, D. C. L., & Podhasky, P. (2014). Aquatic hazard and biodegradability of light and middle atmospheric distillate petroleum streams. Chemosphere, 108, 1–9. doi:10.1016/j.chemosphere.2014.02.028
   PubMed Web of Science ®Google Scholar
• Totten, G. E., & De Negri, V. J. (2017). Handbook of hydraulic fluid technology (2nd ed.). CRC Press.
   Google Scholar
• Totten, G. E., Westbrook, S., & Shah, R. (2003). Fuels and lubricants handbook: Technology, properties, performance, and testing. ASTM International. doi:10.1520/MNL37WCD-EB
   Google Scholar
• U.S. Department of Energy. (2006). Used oil re-refining study to address energy policy Act of 2005 Section 1838. https://fossil.energy.gov/epact/used_oil_report.pdf
   Google Scholar
• UK Environment Agency. (2015). Technical guidance WM3: Waste classification - Guidance on the classification and assessment of waste. https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/427077/LIT_10121.pdf
   Google Scholar
• UNEP. (2015). Guidelines for environmentally sound management of used oils in the Mediterranean. UNEP.
   Google Scholar
• US EPA. (2011). Environmentally acceptable lubricants (Report No. EPA 800‐R‐11‐002). Washington, DC: United States Environmental Protection Agency Office of Wastewater Management.
   Google Scholar
• Vazquez-Duhalt, R. (1989). Environmental impact of used motor oil. The Science of the Total Environment, 79(1), 1–23. doi:10.1016/0048-9697(89)90049-1
   PubMed Web of Science ®Google Scholar
• Vwioko, D. E., Anoliefo, G. O., & Fashemi, S. D. (2006). Metal concentration in plant tissues of Ricinus communis L. (Castor oil) grown in soil contaminated with spent lubricating oil. Journal of Applied Sciences and Environmental Management, 10(3), 127–134. doi:10.4314/jasem.v10i3.17331
   Google Scholar
• Williams, M. R., & Krzykawski, J. (2001). Method for obtaining base oil and removing impurities from used oil products (U.S. Patent 6174431 B1). U.S. Patent and Trademark Office.
   Google Scholar
• Xue, J., Yu, Y., Bai, Y., Wang, L., & Wu, Y. (2015). Marine oil-degrading microorganisms and biodegradation process of petroleum hydrocarbon in marine environments: A review. Current Microbiology, 71(2), 220–228. doi:10.1007/s00284-015-0825-7
   PubMed Web of Science ®Google Scholar
• Zakaria, M. P., Takada, H., Tsutsumi, S., Ohno, K., Yamada, J., Kouno, E., & Kumata, H. (2002). Distribution of polycyclic aromatic hydrocarbons (PAHs) in rivers and estuaries in Malaysia: A widespread input of petrogenic PAHs. Environmental Science & Technology, 36(9), 1907–1918. doi:10.1021/es011278
   PubMed Web of Science ®Google Scholar