Preparation and in vitro degradation characterization of Si-containing coating on AZ31B alloy

References

• H. Waizy, J. M. Seitz, J. Reifenrath, A. Weizbauer, F. W. Bach, A. Meyer-Lindenberg, et al: ‘Biodegradable magnesium implants for orthopedic applications’, J. Mater. Sci., 2013, 48, 39–50.10.1007/s10853-012-6572-2
   Web of Science ®Google Scholar
• M. Rahim, R. Eifler, B. Rais and P. P. Mueller: ‘Alkalization is responsible for antibacterial effects of corroding magnesium’, J. Biomed. Mater. Res. Part A, 2015, 103, 3526–3532.10.1002/jbm.v103.11
   PubMed Web of Science ®Google Scholar
• F. Witte, J. Fischer, J. Nellesen, H. A. Crostack, V. Kaese, A. Pisch, et al: ‘In vitro and in vivo corrosion measurements of magnesium alloys’, Biomaterials, 2006, 27, 1013–1018.10.1016/j.biomaterials.2005.07.037
   PubMed Web of Science ®Google Scholar
• F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A. Meyer-Lindenberg, C. J. Wirth, et al: ‘In vivo corrosion of four magnesium alloys and the associated bone response’, Biomaterials, 2005, 26, 3557–3563.10.1016/j.biomaterials.2004.09.049
   PubMed Web of Science ®Google Scholar
• P. Trivedi, K. C. Nune, R. D. K. Misra, S. Goel, R. Jayganthan and A. Srinivasan: ‘Grain refinement to submicron regime in multiaxial forged Mg-2Zn-2Gd alloy and relationship to mechanical properties’, Mat. Sci. Eng. A, 2016, 668, 59–65.10.1016/j.msea.2016.05.050
   Web of Science ®Google Scholar
• G. Swati, R. K. Singh Raman, A. S. Khann: ‘In vitro investigation of biodegradable polymeric coating for corrosion resistance of Mg-6Zn-Ca alloy in simulated body fluid’, Mater. Sci. Eng. C, 2014, 42, 91–101.
   PubMed Web of Science ®Google Scholar
• Y. Ma, N. Li, D. Li, M. L. Zhang and X. M. Huang: ‘A two-step surface treatment, combining fluoride pretreatment and anodic electrophoresis deposition of waterborne acrylic resin, for Mg-Li-Al-Ce alloy’, Mater. Lett., 2013, 90, 11–13.10.1016/j.matlet.2012.07.053
   Web of Science ®Google Scholar
• L. Wang, K. Zhang, W. Sun, T. T. Wu, H. R. He and G. C. Liu: ‘Hydrothermal synthesis of corrosion resistant hydrotalcite conversion coating on AZ91D alloy’, Mater. Lett., 2013, 106, 111–114.10.1016/j.matlet.2013.05.018
   Web of Science ®Google Scholar
• X. N. Gu, N. Li, W. R. Zhou, Y. F. Zheng, X. Zhao, Q. Z. Cai, et al.: ‘Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg-Ca alloy’, Acta. Biomater., 2011, 7, 1880–1889.10.1016/j.actbio.2010.11.034
   PubMed Web of Science ®Google Scholar
• M. Daroonparvar, M. A. M. Yajid, H. R. Bakhsheshi-Rad, N. M. Yusof, S. Izman, E. Hamzah, et al. Corrosion resistance investigation of nanostructured Si- and Si/TiO2-coated Mg alloy in 3.5% NaCl solution’, Vacuum, 2014, 108, 61–65.10.1016/j.vacuum.2014.05.020
   Web of Science ®Google Scholar
• M. A. Taha, N. A. El-Mahallawy, R. M. Hammouda and S. I. Nassef: ‘PVD coating of Mg–AZ31 by thin layer of Al and Al–Si’, J. Coat. Technol. Res., 2010, 7, 793–800.10.1007/s11998-010-9252-7
   Web of Science ®Google Scholar
• M. S. Killian, S. Seiler, V. Wagener, R. Hahn, C. Ebensperger, B. Meyer and P. Schmuki: ‘Interface chemistry and molecular bonding of functional ethoxysilane-based self-assembled monolayers on magnesium surfaces’, ACS Appl. Mater. Inter., 2015, 7, 9006–9014.10.1021/am5075634
   PubMed Web of Science ®Google Scholar
• A. Mahapatro, T. M. D. Negron, S. A. Arshanapalli, A. S. Gomes and L. Yao: ‘Fabrication, biofunctionality and biocompatibility evaluations of octadecyltrichlorosilane nano coatings on magnesium alloy’, J. Nanoen. Nanomanu., 2015, 5, 294–303.10.1166/jnan.2015.1255
   Google Scholar
• A. Mahapatro, T. D. Matos Negron, A. S. Gomes: ‘Nanostructured self-assembled monolayers on magnesium for improved biological performance’, Mater. Technol., 2016, 1–10. doi:10.1080/10667857.2016.1222053.
   Google Scholar
• M. Li, Y. Cheng, Y. F. Zheng, X. Zhang, T. F. Xi and S. C. Wei: ‘Plasma enhanced chemical vapor deposited silicon coatings on Mg alloy for biomedical application’, Surf. Coat. Technol., 2013, 228, S262–S265.10.1016/j.surfcoat.2012.05.128
   Web of Science ®Google Scholar
• M. Jamesh, G. Wu, Y. Zhao and P. K. Chu: ‘Effects of silicon plasma ion implantation on electrochemical corrosion behavior of biodegradable Mg-Y-RE Alloy’, Corros. Sci., 2013, 69, 158–163.10.1016/j.corsci.2012.11.037
   Web of Science ®Google Scholar
• E. M. Carlisle: ‘The nutritional essentiality of silicon’, Nutr. Rev., 1982, 40, 193–198.
   PubMed Web of Science ®Google Scholar
• M. Yamada, Y. Tohno, S. Tohno, Y. Tohno and M. Benjamin: ‘Silicon compatible with the height of human vertebral column’, Boil. Trace. Elem. Res., 2003, 95, 113–122.10.1385/BTER:95:2
   PubMed Web of Science ®Google Scholar
• T. Ahmadi, A. Monshi, V. Mortazavi, et al: ‘Synthesis and biodegradation evaluation of nano-Si and nano-Si/TiO2 coatings on biodegradable Mg-Ca alloy in simulated body fluid’, Ceram. Int., 2014, 40, 8341–8349.10.1016/j.ceramint.2014.01.040
   Web of Science ®Google Scholar
• W. Y. Zhai, H. X. Lu, L. Chen, X. T. Lin, Y. Huang, K. R. Dai, et al: ‘Silicate bioceramics induce angiogenesis during bone regeneration’, Acta. Biomater., 2012, 8, 341–349.10.1016/j.actbio.2011.09.008
   PubMed Web of Science ®Google Scholar
• M. Y. Shie, S. J. Ding, H. C. Chang: ‘The role of silicon in osteoblast-like cell proliferation and apoptosis’, Acta. Biomater., 2011, 7, 2604–2614.10.1016/j.actbio.2011.02.023
   PubMed Web of Science ®Google Scholar
• L. L. Tan, Q. Wang, X. Lin, P. Wan, G. D. Zhang, Q. Zhang, et al: ‘Loss of mechanical properties in vivo and bone-implant interface strength of AZ31B magnesium alloy screws with Si-containing coating’, Acta. Biomater., 2014, 10, 2333–2340.10.1016/j.actbio.2013.12.020
   PubMed Web of Science ®Google Scholar
• D. Yi, C. Wu, X. Ma, H. Ji, X. B. Zheng and J. Chang: ‘Preparation and in vitro evaluation of plasma-sprayed bioactive akermanite coatings’, Biomed. Mater., 2012, 7, 2719–2726.
   Web of Science ®Google Scholar
• C. T. Wu, Z. T. Chen, D. L. Yi, J. Chang and Y. Xiao: ‘Multidirectional effects of Sr-, Mg-, and Si-containing bioceramic coatings with high bonding strength on inflammation, osteoclastogenesis, and osteogenesis’, ACS Appl. Mater. Inter., 2014, 6, 4264–4276.10.1021/am4060035
   PubMed Web of Science ®Google Scholar
• Anon: ‘ASTM designation C633-standard method of test for adhesive or cohesive strength of flame-sprayed coatings’, 19th Annual Book of ASTM Standards, Part 17; 1969, 636–642, Philadelphia, PA: ASTM.
   Google Scholar
• H. Li, S. Pang, Y. Liu, L. Sun, P. K. Liaw and T. Zhang: ‘Biodegradable Mg-Zn-Ca-Sr bulk metallic glasses with enhanced corrosion performance for biomedical applications’, Mater. Design, 2015, 67, 9–19.10.1016/j.matdes.2014.10.085
   Web of Science ®Google Scholar
• X. Liu, J. Sun, K. Qiu, Y. Yang, P. Zhongjie, L. Li, et al: ‘Effects of alloying elements (Ca and Sr) on microstructure, mechanical property and in vitro corrosion behavior of biodegradable Zn-1.5 Mg alloy’, J. Alloy. Compd., 2016, 664, 444–452.10.1016/j.jallcom.2015.10.116
   Web of Science ®Google Scholar
• J. Liu, Y. Lu, X. Jing, Y. Yuan and M. Zhang: ‘Characterization of plasma electrolyticoxidation coatings formed on Mg-Li alloy in an alkaline silicate electrolyte containing silica sol’, Mater. Corros., 2009, 60, 865–870.10.1002/maco.v60:11
   Web of Science ®Google Scholar
• Z. J. Jia, M. Li, Q. Liu, X. C. Xu, Y. Cheng, Y. F. Zheng, et al: ‘Micro-arc oxidization of a novel Mg-1Ca alloy in three alkaline KF electrolytes: corrosion resistance and cytotoxicity’, Appl. Sur. Sci., 2014, 292, 1030–1039.10.1016/j.apsusc.2013.11.038
   Web of Science ®Google Scholar
• F. Fally, I. Virlet, J. Riga and J. J. Verbis: ‘Detailed multitechnique spectroscopic surface and bulk characterization of plasma polymers deposited from 1-propanol, ally1 alcohol, and propargyl alcohol’, J. Appl. Polym. Sci., 1996, 59, 1569–1584.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• X. Y. Lu, Y. Zuo, X. H. Zhao and Y. M. Tang: ‘The improved performance of a Mg-rich epoxy coating on AZ91D magnesium alloy by silane pretreatment’, Corros. Sci., 2012, 60:165–172.10.1016/j.corsci.2012.03.041
   Web of Science ®Google Scholar
• H. Fukuda, Y. Matsumoto: ‘Effects of Na2SiO3 on anodization of Mg-Al-Zn alloy in 3 M KOH solution’, Corros. Sci., 2004, 46, 2135–2142.10.1016/j.corsci.2004.02.001
   Web of Science ®Google Scholar
• H. R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar, M. Kasiri-Asgarani, M. Medraj: ‘Synthesis and biodegradation evaluation of nano-Si and nano-Si/TiO2 coatings on biodegradable Mg-Ca alloy in simulated body fluid’, Ceram. Int., 2014, 40, 14009–14018.10.1016/j.ceramint.2014.05.126
   Web of Science ®Google Scholar
• H. R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar, M. A. M. Yajid and M. Medraj: ‘Fabrication and corrosion behavior of Si/HA nano-composite coatings on biodegradable Mg-Zn-Mn-Ca alloy’, Surf. Coat. Technol., 2014, 258, 1090–1099.10.1016/j.surfcoat.2014.07.025
   Web of Science ®Google Scholar
• F. Y. Zhang, S. Cai, G. H. Xu, S. B. Shen, Y. Li, M. Zhang, et al: ‘Corrosion behavior of mesoporous bioglass-ceramic coated magnesium alloy under applied forces’, J. Mech. Behav. Biomed., 2016, 56, 146–155.10.1016/j.jmbbm.2015.11.029
   PubMed Web of Science ®Google Scholar
• C. F. Dunne, G. K. Levy, O. Hakimi, E. Aghion, B. Twomey and K. T. Stanton: ‘Corrosion behaviour of biodegradable magnesium alloys with hydroxyapatite coatings’, Surf. Coat. Technol., 2016, 289, 37–44.10.1016/j.surfcoat.2016.01.045
   Web of Science ®Google Scholar
• G. K. Levy, Y. Ventura, J. Goldman, R. Vago and E. Aghion: ‘Cytotoxic characteristics of biodegradable EW10X04 Mg alloy after Nd coating and subsequent heat treatment’, Mater. Sci. Eng. C, 2016, 62, 752–761.10.1016/j.msec.2016.01.086
   PubMed Web of Science ®Google Scholar
• L. Pompa, Z. U. Rahman, E. Munoz and W. Haider: ‘Surface characterization and cytotoxicity response of biodegradable magnesium alloys’, Mater. Sci. Eng. C, 2015, 49, 761–768.10.1016/j.msec.2015.01.017
   PubMed Web of Science ®Google Scholar
• N. T. Kirkland, N. Birbilis, M. P. Staiger: ‘Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations’, Acta. Biomater., 2012, 8, 925–936.10.1016/j.actbio.2011.11.014
   PubMed Web of Science ®Google Scholar
• Z. J. Li, X. N. Gu, S. Q. Lou and Y. F. Zheng: ‘The development of binary Mg-Ca alloys for use as biodegradable materials within bone’, Biomaterials, 2008, 29, 1329–1344.10.1016/j.biomaterials.2007.12.021
   PubMed Web of Science ®Google Scholar
• M. P. Staiger, A. M. Pietak, J. Huadmai and G. Dias: ‘Magnesium and its alloys asorthopedic biomaterials: a review’, Biomaterials, 2006, 27, 1728–1734.10.1016/j.biomaterials.2005.10.003
   PubMed Web of Science ®Google Scholar
• J. H. Jo, J. Y. Hong, K. S. Shin, H. E. Kim and Y. H. Koh: ‘Enhancing biocompatibility andcorrosion resistance of Mg implants via surface treatments’, J. Biomater. Appl., 2012, 27, 469–476.10.1177/0885328211412633
   PubMed Web of Science ®Google Scholar
• Y. K. Pan, C. Z. Chen, D. G. Wang and D. L. Huang: ‘Dissolution and precipitation behaviors of silicon-containing ceramic coating on Mg–Zn–Ca alloy in simulated body fluid’, Colloids Surf. B Biointerfaces, 2014, 122, 746–751.10.1016/j.colsurfb.2014.08.012
   PubMed Web of Science ®Google Scholar
• W. Stumm, J. J. Morgan, ed.: ‘Aquatic chemistry’, 3rd edn., 407–1025; 1996, New York: Wiley-Interscience.
   Google Scholar