Studies on electrical properties of microwave assisted synthesis of NiO/YSZ composites for high - performance anode in solid oxide fuel cell

References

• Gao Z, Mogni L, Miller EC, et al. A perspective on low-temperature solid oxide fuel cells. Energy Environ Sci. 2016;9(5):1602–1644. DOI: 10.1039/C5EE03858H.
   Web of Science ®Google Scholar
• Perry Murray E, Sai TT, Barnett SA. Adirect-methane fuel cell with a ceria-based anode. Nature. 1999;400:649.
   Web of Science ®Google Scholar
• Shri Prakash B, Senthil Kumar S, Aruna ST. Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: a review. Renew Sustain Energy Rev. 2014;36:149–179.10.1016/j.rser.2014.04.043
   Web of Science ®Google Scholar
• Koide H, Someya Y, Yoshida T. Properties of Ni/YSZ cermet as anode for SOFC. Solid State Ionics. 2000;132:253–260.10.1016/S0167-2738(00)00652-4
   Web of Science ®Google Scholar
• Aruna ST, Muthuraman M. Synthesis and properties of Ni-YSZ cermet: anode material for solid oxide fuel cells. Solid State Ionics. 1998;111:45–51.10.1016/S0167-2738(98)00187-8
   Web of Science ®Google Scholar
• Lee JH, Heo JW, Lee DS, et al. The impact of anode microstructure on the power generating characteristics of SOFC. Solid State Ionics. 2003;158:225–232.10.1016/S0167-2738(02)00915-3
   Web of Science ®Google Scholar
• Min Park YM. Microstructure and electrical properties of YSZ–NiO composites. Solid State Ionics. 1999;120:265–274.10.1016/S0167-2738(99)00010-7
   Web of Science ®Google Scholar
• Marinsek M, Zupan K, Macek J. Preparation of Ni–YSZ composite materials for solid oxide fuel cell anodes by the gel-precipitation method. J Power Sources. 2000;86:383–389.
   Web of Science ®Google Scholar
• Jiang SP, Duan YY, Love JG. Fabrication of high-performance NiOY2O3-ZrO2 cermet anodes of solid oxide fuel cells by ion impregnation. J Electrochen Soc. 2002;149:1175–1183.
   Web of Science ®Google Scholar
• Kim SD, Moon H, Hyun SH, et al. Ni-YSZ cermet anode fabricated from NiO-YSZ composite powder for high-performance and durability of solid oxide fuel cells. Solid State Ionics. 2007;178:1304–1309.10.1016/j.ssi.2007.06.014
   Web of Science ®Google Scholar
• Keech PG, Trifan DE, Birss VI. Synthesis and performance of sol-gel prepared Ni-YSZ cermet SOFC anodes. J Electrochem Soc. 2005;152(3):A645–A651.10.1149/1.1855875
   Web of Science ®Google Scholar
• Mohebbi H, Ebadzadeh T, Hesari FA. Synthesis of nano-crystalline (Ni/NiO)–YSZ by microwave-assisted combustion synthesis method: the influence of pH of precursor solution. J Power Sources. 2008;178:64–68.10.1016/j.jpowsour.2007.12.054
   Web of Science ®Google Scholar
• Patil KC, Aruna ST, Mimania T. Combustion synthesis: an update. Curr Opin Solid State Mater Sci. 2002;6:507–512.
   Web of Science ®Google Scholar
• Mangalaraja RV, Ananthakumar S, Manohar P, et al. Microwave-flash combustion synthesis of Ni0.8Zn0.2Fe2O4 and its dielectric characterization. Mater Lett. 2004;58:1593–1596.10.1016/j.matlet.2003.10.032
   Web of Science ®Google Scholar
• de Freitas MR, de Gouveia GL, Costa LJD, et al. Microwave assisted combustion synthesis and characterization of nanocrystalline nickel-doped cobalt ferrites. Mater Res AHEAD. 2016;19(Suppl.1):27.
   Web of Science ®Google Scholar
• Gedevanishvili S, Agrawal D, Roy R. Microwave combustion synthesis and sintering of intermetallics and alloys. J Mater Sci Lett. 1999;18:665–668.
   Google Scholar
• Anbarasi P, Satheesh Kumar E, Chithralekha P. Synthesis of B-site substituted cathode material for reduced capacity fading. Int J ChemTech Res. 2015;8:8–12.
   Google Scholar
• Kakade MB, Ramanathan S, Das D. Gel-combustion, characterization and processing of porous Ni–YSZ cermet for anodes of solid oxide fuel cells (SOFCs). Ceram Int. 2011;37:195–200.
   Web of Science ®Google Scholar
• Kim SD, Moon H, Hyun SH, et al. Performance and durability of Ni-coated YSZ anodes for intermediate temperature solid oxide fuel cells. Solid State Ionics. 2006;177:931–938.10.1016/j.ssi.2006.02.007
   Web of Science ®Google Scholar
• Bernard-Granger GB, Guizard C. New relationships between relative density and grain size during solid-state sintering of ceramic powders. Acta Mater. 2008;56:6273–6282.10.1016/j.actamat.2008.08.054
   Web of Science ®Google Scholar
• Han KR, Jeong Y, Lee H, et al. Fabrication of NiO/YSZ anode material for SOFC via mixed NiO precursors. Mater Lett. 2007;61:1242–1245.10.1016/j.matlet.2006.07.005
   Web of Science ®Google Scholar
• Sahoo S, Dash U, Parashar SKS, et al. Frequency and temperature dependent electrical characteristics of CaTiO3 nano-ceramic prepared by high-energy ball milling. J Adv Ceram. 2013;2:291–300.10.1007/s40145-013-0075-8
   Web of Science ®Google Scholar
• Singh K, Acharya S, Bhoga S. Glycene-nitrates combustion synthesis and properties of nano-sized Ce1-x Gdx O2-δ’. Indian J Eng Mater S. 2006;13:525–530.
   Web of Science ®Google Scholar
• Anbarasi P, Satheeshkumar E, Ilango K, et al. Dielectric studies and conduction mechanism of Zn and Ag modified LiMn2O4 synthesized by solution combustion method. Appl Phys A. 2017;123:407.
   Web of Science ®Google Scholar
• Hong HS, Chae US, Choo ST, et al. Microstructure and electrical conductivity of Ni/YSZ and NiO/YSZ composites for high-temperature electrolysis prepared by mechanical alloying. J Power Sources. 2005;149:84–89.10.1016/j.jpowsour.2005.01.057
   Web of Science ®Google Scholar
• El-Mallah HM. AC electrical conductivity and dielectric properties of perovskite (Pb,Ca)TiO 3 ceramic. Acta PhysPol A. 2012;122:174.10.12693/APhysPolA.122.174
   Google Scholar
• Chithra lekha P, Subramanian S. Investigation of pseudocapacitance effect and frequency dependence of ac impedance in polyaniline–polyoxometalate hybrids. J Mater Sci. 2009;44:6040–6053.10.1007/s10853-009-3828-6
   Web of Science ®Google Scholar