Mica glass ceramics for dental restorations

References

• Petersen PE, Bourgeois D, Ogawa H, et al. The global burden of oral diseases and risks to oral health. Bull World Health Organ. 2005 Sep;83(9):661–669.
   PubMed Web of Science ®Google Scholar
• Anusavice K, Shen C, Rawls R. Phillips’ Science of Dental Materials. Nair S, editor. Philadelphia: Saunders: Reed ElsevierIndia Private Limited; 2014. First Sout.
   Google Scholar
• University of Tenessee D of MS and E. Introduction to Material Science and Engineering. Chapter 1. http://web.utk.edu/~prack/mse201/Chapter%201%20Basics.pdf.
   Google Scholar
• Anusavice KJ, Shen C, Rawls HR. Science of dental materials. First South Asia Edition. New Delhi: Reed Elsevier India Private Limited; 2014. p. 445–447.
   Google Scholar
• Höland W, Rheinberger V, Apel E, et al. Principles and phenomena of bioengineering with glass-ceramics for dental restoration. J Eur Ceram Soc. 2007;27(2–3):1521–1526.
   Web of Science ®Google Scholar
• Albakry M, Guazzato M, Swain MV. Biaxial flexural strength, elastic moduli, and x-ray diffraction characterization of three pressable all-ceramic materials. J Prosthet Dent. 2003;89(4):374–380.
   PubMed Web of Science ®Google Scholar
• Vogel W, Holand W, Naumann K, et al. Development of machineable bioactive glass ceramics for medical uses. J Non Cryst Solids. 1986;80:34–51.
   Web of Science ®Google Scholar
• Roy S, Basu B. Microstructure development in machinable mica based dental glass ceramics. Trends Biomater Artif Organs. 2006;20(1):90–100.
   Google Scholar
• Kalmodia S, Molla AR, Basu B. In vitro cellular adhesion and antimicrobial property. J Mater Sci Mater Med. 2010;21:1297–1309.
   PubMed Web of Science ®Google Scholar
• Xiang Q, Liu Y, Sheng X, et al. Preparation of mica-based glass-ceramics with needle-like fluorapatite. Dent Mater. 2007;23(2):251–258.
   PubMed Web of Science ®Google Scholar
• Garai M, Sasmal N, Molla AR, et al. Effects of nucleating agents on crystallization and microstructure of fluorophlogopite mica-containing glass–ceramics. J Mater Sci. 2013;49(4):1612–1623.
   Web of Science ®Google Scholar
• Bapna MS, Mueller HJ. Thermodilatometric Characterization for Devitrification of a Micaceous Dental Glass-Ceramic. J Am Ceram Soc. 1999;82(7):1771–1776.
   Web of Science ®Google Scholar
• Petra C, Guess EA, Bonfante PG, et al. All-Ceramic Systems: laboratory and Clinical Performance. Dent Clin North Am. 2011 Apr;55(2):333–352.
   PubMedGoogle Scholar
• Griggs JA. Recent Advances in Materials for All-Ceramic Restorations. Dent Clin North Am. 2007;51(3):713–727.
   PubMedGoogle Scholar
• Pollington S, Patil S. Novel glass-ceramics for dental restorations. J Contemp Dent Pract. 2011;12(1):60–67.
   PubMedGoogle Scholar
• Anon. Celtra® Duo.
   Google Scholar
• Rinke S, Rödiger M, Ziebolz D, et al. Fabrication of Zirconia-Reinforced Lithium Silicate Ceramic Restorations Using a Complete Digital Workflow. Case Rep Dent. 2015; 2015:Article ID 162178, 7 p.
   PubMed Web of Science ®Google Scholar
• McLaren EA, Whiteman YY. Ceramics: rationale for material selection. Compend Contin Educ Dent. 2012;31(9):666–668. 670, 672 passim; quiz 680, 700.
   Google Scholar
• Sol??-Ru??z MF, Agustin-Panadero R, Fons-Font A, et al. A prospective evaluation of zirconia anterior partial fixed dental prostheses: clinical results after seven years. J Prosthet Dent. 2015;113(6):578–584.
   PubMed Web of Science ®Google Scholar
• Amaral M, Valandro LF, Bottino MA, et al. Low-temperature degradation of a Y-TZP ceramic after surface treatments. J Biomed Mater Res Part B Appl Biomater. 2013;101(8):1387–1392.
   PubMed Web of Science ®Google Scholar
• Chen X, Hench LL, Greenspan D, et al. Investigation on phase separation, nucleation and crystallization in bioactive glass-ceramics containing fluorophlogopite and fluorapatite. Ceram Int. 1998;24(5):401–410.
   Web of Science ®Google Scholar
• Guess PC, Kuliš A, Witkowski S, et al. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater. 2008;24(11):1556–1567.
   PubMed Web of Science ®Google Scholar
• Raigrodski AJ, Hillstead MB, Meng GK, et al. Survival and complications of zirconia-based fixed dental prostheses: a systematic review. J Prosthet Dent. 2012;107(3):170–177.
   PubMed Web of Science ®Google Scholar
• Rinke S, Gersdorff N, Lange K, et al. Prospective evaluation of zirconia posterior fixed partial dentures: 7-year clinical results. Int J Prosthodont. 2013;26(2):164–171.
   PubMed Web of Science ®Google Scholar
• Vagkopoulou T, Koutayas SO, Koidis P, et al. Zirconia in dentistry: part 1. Discovering the nature of an upcoming bioceramic. Eur J Esthet Dent. 2009;4(2):130–151.
   PubMedGoogle Scholar
• Zahran M, El-Mowafy O, Tam L, et al. Fracture Strength and Fatigue Resistance of All-Ceramic Molar Crowns Manufactured with CADCAM Technology. J Prosthodont. 2008;17(5):370–377.
   PubMedGoogle Scholar
• Dittmer MP, Borchers L, Stiesch M, et al. Stresses and distortions within zirconia-fixed dental prostheses due to the veneering process. Acta Biomater. 2009;5(8):3231–3239.
   PubMed Web of Science ®Google Scholar
• Beuer F, Schweiger J, Eichberger M, et al. High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings - A new fabrication mode for all-ceramic restorations. Dent Mater. 2009;25(1):121–128.
   PubMed Web of Science ®Google Scholar
• Swain MV. Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures. Acta Biomater. 2009;5(5):1668–1677.
   PubMed Web of Science ®Google Scholar
• Höland W, Rheinberger V, Apel E, et al. Future perspectives of biomaterials for dental restoration. J Eur Ceram Soc. 2009;29(7):1291–1297.
   Web of Science ®Google Scholar
• Pollington S, Van Noort NR. An Update of Ceramics in Dentistry.Int J Clin Dent. 2009;2(4):283–307.
   Google Scholar
• Mclaren EA, Cao PT. Ceramics in Dentistry—part I: classes of Materials. Insid Dent. 2009;7(October):94–103.
   Google Scholar
• Höland W, Rheinberger V, Apel E, et al. Clinical applications of glass-ceramics in dentistry. J Mater Sci Mater Med. 2006;17(11):1037–1042.
   PubMed Web of Science ®Google Scholar
• Denry I, Holloway JA. Ceramics for Dental Applications: a Review. Materials (Basel). 2010;3(1):351–368.
   Web of Science ®Google Scholar
• Roy S, Basu B. On the development of two characteristically different crystal morphology in SiO 2 – mgO – al 2 O 3 – K 2 O – B 2 O 3 – F glass-ceramic system. J Mater Sc Mater Med. 2009;20(1):51–66.
   PubMed Web of Science ®Google Scholar
• Höland George BW. Glass Ceramic Technology. 2nd ed. Ohio: The American Ceramic Society; 2012.
   Google Scholar
• Molla AR, Basu B. Microstructure, mechanical, and in vitro properties of mica glass-ceramics with varying fluorine content. J Mater Sci Mater Med. 2009;5:2668–2679.
   Google Scholar
• Henry J, Hill R. The influence of lithia content on the properties of fluorphlogopite glass-ceramics. II. Microstructure hardness and machinability. J Non Cryst Solids. 2003;319:13–30.
   Web of Science ®Google Scholar
• Li H, You DQ, Zhou CR, et al. Study on machinable glass-ceramic containing fluorophlogopite for dental CAD/CAM system. J Mater Sci Mater Med. 2006;17(11):1133–1137.
   PubMed Web of Science ®Google Scholar
• Uno T, Kasuga T, Nakajima K. High-Strength Mica-Containing Glass-Ceramics. J Am Ceram Soc. 1991;74(12):3139–3141.
   Web of Science ®Google Scholar
• Uno T, Kasuga T, Nakayama S, et al. Microstructure of Mica-Based Nanocomposite Glass-Ceramics. J Am Ceram Soc. 1993;76(2):539–541.
   Web of Science ®Google Scholar
• Quinn JB, Sundar V, Lloyd IK. Influence of microstructure and chemistry on the fracture toughness of dental ceramics. Dent Mater. 2003;19(7):603–611.
   PubMed Web of Science ®Google Scholar
• Montazerian M, Alizadeh P, Eftekhari Yekta B. Pressureless sintering and mechanical properties of mica glass-ceramic/Y-PSZ composite. J Eur Ceram Soc. 2008;28(14):2687–2692.
   Web of Science ®Google Scholar
• Cheng, K., Wan, J., Liang, K. Crystallization of R2O–MgO–Al2O3–B2O3–SiO2–F (R=K+, Na+) glasses with different fluorine source. Materials Letters. 2001;47(1–2):1–6. https://doi.org/10.1016/S0167-577X(00)00201-9.
   Web of Science ®Google Scholar
• Radonjić L, Nikolić L. The effect of fluorine source and concentration on the crystallization of machinable glass-ceramics. J Eur Ceram Soc. 1991;7(1):11–16.
   Google Scholar
• Uno T, Kasuga T, Nakajima K. High-Strength Mica-Containing Glass-Ceramics. J Am Ceram Soc. 1991;74:3139–3141.
   Web of Science ®Google Scholar
• Kalmodia S, Basu B, Molar AR. In vitro cellular adhesion and antimicrobial property. J Mater Sci Mater Med. 2010;21:1297–1309.
   PubMed Web of Science ®Google Scholar
• Taruta S, Watanabe K, Kitajima K, et al. Effect of titania addition on crystallization process and some properties of calcium mica – apatite glass-ceramics. J Non Cryst Solids. 2003;321:96–102.
   Web of Science ®Google Scholar
• Wang J, Stevens R. Zirconia-toughened alumina (ZTA) ceramics. J Mater Sci. 1989;24(10):3421–3440.
   Web of Science ®Google Scholar
• Hench LL. Bioceramics. J Am Ceram Soc. 1998;28:1705–1728.
   Google Scholar
• Hannink RHJ, Kelly PM, Muddle BC. Transformation Toughening in Zirconia-Containing Ceramics. J Am Ceram Soc. 2004;83(3):461–487.
   Google Scholar
• Manicone PF, Rossi Iommetti P, Raffaelli L. An overview of zirconia ceramics: basic properties and clinical applications. J Dent. 2007;35(11):819–826.
   PubMed Web of Science ®Google Scholar
• Holand W, Beall G. Glass–ceramic Technology. Ohio: The American Ceramic Society; 2002.
   Google Scholar
• Montazerian M, Alizadeh P, Eftekhari Yekta B. Processing and properties of a mica-apatite glass-ceramic reinforced with Y-PSZ particles. J Eur Ceram Soc. 2008;28(14):2693–2699.
   Web of Science ®Google Scholar
• Verne E, Defilippia A,R, Carlb G, et al. Viscous flow sintering of bioactive glass-ceramic composites toughened by zirconia particles. J Eur Ceram Soc. 2003;23:675–683.
   Web of Science ®Google Scholar
• Yang H, Wu S, Hu J, et al. Influence of nano-ZrO2 additive on the bending strength and fracture toughness of fluoro-silicic mica glass–ceramics. Mater Des. 2011;32(3):1590–1593.
   Web of Science ®Google Scholar
• Persson C, Unosson E, Ajaxon I, et al. Nano grain sized zirconia-silica glass ceramics for dental applications. J Eur Ceram Soc. 2012;32(16):4105–4110.
   Web of Science ®Google Scholar
• Li H, Wang D, Meng X, et al. Influence of heat treatments upon the mechanical properties and in vitro bioactivity of ZrO 2 -toughened MgO-CaO-SiO 2 -P 2 O 5 -CaF 2 glass–ceramics. Biointerphases. 2014;9(3):031014.
   PubMed Web of Science ®Google Scholar
• Gali S, Ravikumar K, Murthy BVS, et al. Zirconia toughened mica glass ceramics for dental restorations. Dent Mater. 2018;34(3):e36–e45.
   PubMed Web of Science ®Google Scholar
• Qin F, Zheng S, Luo Z, et al. Evaluation of machinability and flexural strength of a novel dental machinable glass-ceramic. J Dent. 2009;37(10):776–780.
   PubMed Web of Science ®Google Scholar
• Taruta S, Sakata M, Yamaguchi T, et al. Crystallization process and some properties of novel transparent machinable calcium-mica glass-ceramics. Ceram Int. 2008;34(1):75–79.
   Web of Science ®Google Scholar
• Kelly JR, Benetti P, Rungruanganunt P, et al. The slippery slope – critical perspectives on in vitro research methodologies. Dent Mater. 2012;28(1):41–51.
   PubMed Web of Science ®Google Scholar
• Peng Z, Izzat Abdul Rahman M, Zhang Y, et al. Wear behavior of pressable lithium disilicate glass ceramic. J Biomed Mater Res B Appl Biomater. 2016;104(5):968–978.
   PubMed Web of Science ®Google Scholar
• Nagarajan VS, Jahanmir S. The relationship between microstructure and wear of mica-containing glass-ceramics. Wear. 1996;200(1–2):176–185.
   Web of Science ®Google Scholar
• Ravikiran A, Jahanmir S. Effect of interfacial layers on wear behavior of a dental glass-ceramic. J Am Ceram Soc. 2000;83(7):1831–1833.
   Web of Science ®Google Scholar
• Sripetchdanond J, Leevailoj C. Wear of human enamel opposing monolithic zirconia, glass ceramic, and composite resin: an in vitro study. J Prosthet Dent. 2014;112(5):1141–1150.
   PubMed Web of Science ®Google Scholar
• Magne P, Oh W-S, Pintado MR, et al. Wear of enamel and veneering ceramics after laboratory and chairside finishing procedures. J Prosthet Dent. 1999;82(6):669–679.
   PubMed Web of Science ®Google Scholar
• Mö Rmann WH, Stawarczyk B, Ender A, et al. Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. J Mech Behavior Biomed Mater 2013.1 (20):113–25
   Google Scholar
• Heintze SD. How to qualify and validate wear simulation devices and methods. Dent Mater. 2006;22(8):712–734.
   PubMed Web of Science ®Google Scholar
• Abdul Aziz A, Saury C, Bui Xuan V, et al. On the material characterization of a composite using micro CT image based finite element modeling presented at SPIE Smart Structures and Materials and NDE; 2006. Feb; San Diego, CA.
   Google Scholar
• Höland W, Schweiger M, Frank M, et al. A comparison of the microstructure and properties of the IPS Empress®2 and the IPS Empress® glass-ceramics. J Biomed Mater Res. 2000;53(4):297–303.
   PubMed Web of Science ®Google Scholar
• Jung Y-S, Lee J-W, Choi Y-J, et al. A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain. J Adv Prosthodont. 2010;2(3):111.
   PubMed Web of Science ®Google Scholar
• Jahanmir S, Dong X. Wear mechanism of a dental glass-ceramic. Wear. 1995;181–183:821–825.
   Web of Science ®Google Scholar
• Metzler KT, Woody RD, Miller AW, et al. In vitro investigation of the wear of human enamel by dental porcelain. J Prosthet Dent. 1999;81(3):356–364.
   PubMed Web of Science ®Google Scholar
• Al-Hiyasat AS, Saunders WP, Sharkey SW, et al. Investigation of human enamel wear against four dental ceramics and gold. J Dent. 1998;26(5–6):487–495.
   PubMed Web of Science ®Google Scholar
• Krejci I, Lutz F, Reimer M. Wear of CAD/CAM ceramic inlays: restorations, opposing cusps, and luting cements. Quintessence Int. 1994;25(3):199–207.
   PubMedGoogle Scholar
• Sripetchdanond J, Leevailoj C. Wear of human enamel opposing monolithic zirconia, glass ceramic, and composite resin: an in vitro study. J Prosthet Dent. 2014;112(5):1141–1150.
   PubMed Web of Science ®Google Scholar
• Lambrechts P, Debels E, Van Landuyt K, et al. How to simulate wear? Overview of existing methods. Dental Materials. 2006;22:693–701.
   PubMed Web of Science ®Google Scholar
• Anusavice KJ. Science of Dental Materials. New Delhi: Reed Elsevier India Private Limited; 2012.
   Google Scholar
• Raptis NV, Michalakis KX. Optical Behavior of Current Ceramic Systems. 2005.
   Google Scholar
• Friebel M, Povel K, Cappius H-J, et al. Optical properties of dental restorative materials in the wavelength range 400 to 700 nm for the simulation of color perception. J Biomed Opt. 2015;14(5):054029.
   Google Scholar
• Corning Corporation D. Optical Properties, Definitions and Measurements Optical Properties. Light Solut. 2012;11–2092-01.
   Google Scholar
• Cook WD, McAree DC. Optical properties of esthetic restorative materials and natural dentition. J Biomed Mater Res. 1985;19(5):469–488.
   PubMed Web of Science ®Google Scholar
• Sinthuprasirt P, Van Noort R, Moorehead R, et al. Evaluation of a novel multiple phase veneering ceramic. Dent Mater. 2015;31(4):443–452.
   PubMed Web of Science ®Google Scholar
• Tuncel İ, Turp I, Üşümez A. Evaluation of translucency of monolithic zirconia and framework zirconia materials. J Adv Prosthodont. 2016;8(3):181.
   PubMed Web of Science ®Google Scholar
• Kim M-J, Ahn J-S, Kim J-H, et al. Effects of the sintering conditions of dental zirconia ceramics on the grain size and translucency. J Adv Prosthodont. 2013;5(2):161–166.
   PubMed Web of Science ®Google Scholar
• Heffernan MJ, Aquilino SA, Diaz-Arnold AM, et al. Relative translucency of six all-ceramic systems. Part II. Jounral Prosthet Dent. 2002;88(1):5–8.
   Web of Science ®Google Scholar
• Orera VM, Merino RI. Cerámica y Vidrio Ceramics with photonic and optical applications Cerámicas con aplicaciones ópticas y fotónicas. Boletín La Soc Española Cerámica Y Vidr. 2015;54(1):1–10.
   Google Scholar
• Taruta S, Ichinose T, Yamaguchi T, et al. Preparation of transparent lithium-mica glass-ceramics. J Non Cryst Solids. 2006;352(52–54):5556–5563.
   Web of Science ®Google Scholar
• Taruta S, Matsuki M, Nishikiori H, et al. Preparation and luminescent properties of Eu-doped transparent mica glass-ceramics. Ceram Int. 2010;36(4):1303–1309.
   Web of Science ®Google Scholar
• Taruta S, Mizoguchi A, Yamakami T, et al. Formation of Ag nanoparticles in transparent mica glass-ceramics. J Non Cryst Solids. 2017;455:52–58.
   Web of Science ®Google Scholar
• Ritzberger C, Schweiger M, Höland W. Principles of crystal phase formation in Ivoclar Vivadent glass-ceramics for dental restorations. J Non Cryst Solids. 2015;432:137–142.
   Web of Science ®Google Scholar
• Murray PE, Godoy CG, Godoy FG. How is the biocompatibilty of dental biomaterials evaluated? Med Oral Patol Oral Cir Bucal. 2007;12:E258–E66.
   PubMedGoogle Scholar
• Thonemann B, Schmalz G, Hiller K, et al. Responses of L929 mouse ® broblasts, primary and immortalized bovine dental papilla-derived cell lines to dental resin components. Dent Mater. 2002;18:318–323.
   PubMed Web of Science ®Google Scholar
• Messer RLW, Lockwood PE, Wataha JC, et al. In vitro cytotoxicity of traditional versus contemporary dental ceramics. J Prosthet Dent. 2003;90(5):452–458.
   PubMed Web of Science ®Google Scholar
• Brackett MG, Lockwood PE, Messer RLW, et al. In vitro cytotoxic response to lithium disilicate dental ceramics. Dent Mater. 2008;24(4):450–456.
   PubMed Web of Science ®Google Scholar
• Elshahawy WM, Watanabe I, Kramer P. In vitro cytotoxicity evaluation of elemental ions released from different prosthodontic materials. Dent Mater. 2009;25(12):1551–1555.
   PubMed Web of Science ®Google Scholar
• S V A, Podzorova LI, Shvorneva LI, et al. [Development of modified zirconia based dental material]. Stomatologii͡A. 2011;90(5):10–13.
   Google Scholar
• Browne RM. The in vitro assessment of the cytotoxicity of dental materials–does it have a role? Int Endod J. 1988;21(2):50–58.
   PubMed Web of Science ®Google Scholar
• Murray PE, Lumley PJ, Ross HF, et al. Tooth slice organ culture for cytotoxicity assessment of dental materials. Biomaterials. 2000;21(16):1711–1721.
   PubMed Web of Science ®Google Scholar
• Pae A, Lee H, Kim H-S, et al. Attachment and growth behaviour of human gingival fibroblasts on titanium and zirconia ceramic surfaces. Biomed Mater. 2009;4(2):025005.
   PubMed Web of Science ®Google Scholar
• Mustafa K, Odén A, Wennerberg A, et al. The influence of surface topography of ceramic abutments on the attachment and proliferation of human oral fibroblasts. Biomaterials. 2005;26(4):373–381.
   PubMed Web of Science ®Google Scholar
• Yamano. S, Kwok-Yui Ma A, Shanti RM, et al. The influence of different implant materials on human gingival fibroblast morphology, proliferation, and gene expression. Int J Oral Maxillofac Implant. 2011;26(6):1247–1255.
   PubMed Web of Science ®Google Scholar
• Zanotto ED. A bright future for glass-ceramics. Am Ceram Soc Bull. 2010;89(10):19–27.
   Google Scholar