References
- T. D. Lee and A. Ebong, “Thin film solar technologies: A review,” in 2015 12th International Conference on High-capacity Optical Networks and Enabling/Emerging Technologies (HONET), 2015, pp. 1–10.
- Jackson P, Wuerz R, Hariskos D, et al. Effects of heavy alkali elements in Cu(In,Ga)Se 2 solar cells with efficiencies up to 22.6%. Phys Status Solidi Rapid Res Lett. 2016 Aug;10(8):583–586.
- Lin YC, Hsieh YT, Lai CM, et al. Impact of Mo barrier layer on the formation of MoSe2 in Cu(In,Ga)Se2 solar cells. J Alloys Compd. 2016;661:168–175.
- Cao Q, Gunawan O, Copel M, et al. Defects in Cu(In,Ga)Se 2 chalcopyrite semiconductors: A comparative study of material properties, defect states, and photovoltaic performance. Adv Energy Mater. 2011;1(5):845–853.
- Wada T, Kohara N, Negami T. Chemical and structural characterization of Cu(In,Ga)Se2/Mo interface in Cu(In, Ga)Se2 solar cells.Japanese Journal of Applied Physics, 1996,Vol 35
- Würz R, Marrón DF, Meeder A. Formation of an interfacial MoSe 2 layer in CVD grown CuGaSe 2 based thin film solar cells. Thin Solid Films. 2003;432:398–402.
- Rand BP, Genoe J, Heremans P, et al. The effect of Mo back contact ageing on Cu(In,Ga)Se2. Prog Photovolt Res Appl. 2007;15(February 2013):659–676.
- Kohara N, Nishiwaki S, Hashimoto Y, et al. Electrical properties of the Cu(In,Ga)Se2/MoSe2/Mo structure. Sol Energy Mater Sol Cells. 2001;67(1–4):209–215.
- Hsiao K-J, Liu J-D, Hsieh -H-H, et al. Electrical impact of MoSe2 on CIGS thin-film solar cells. Phys Chem Chem Phys. 2013;15(41):18174–18178.
- Pang JB, Cai YA, He Q, et al. Preparation and characteristics of MoSe2 interlayer in bifacial Cu(In,Ga)Se2 Solar Cells. Phys Procedia. 2012;32:372–378.
- Wada T, Kohara N, Nishiwaki S, et al. Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells. Thin Solid Films. 2001;387(1–2):118–122.
- Hossain MI, Alharbi FH. Recent advances in alternative material photovoltaics. Mater Technol. 2013;28(1–2):88–97.
- Polizzotti A, Repins IL, Noufi R, et al. The state and future prospects of kesterite photovoltaics. Energy Environ Sci. 2013;6(11):3171.
- Lin YC, Hong DH, Hsieh YT, et al. Role of Mo: nalayer on the formation of MoSe2 phase in Cu(In,Ga)Se2 thin film solar cells. Sol Energy Mater Sol Cells. 2016;155:226–233.
- Shin B, Zhu Y, Bojarczuk NA, et al. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier. Appl Phys Lett. 2012;101(5):053903.
- Jeon CW, Cheon T, Kim H, et al. Controlled formation of MoSe2 by MoNx thin film as a diffusion barrier against Se during selenization annealing for CIGS solar cell. J Alloys Compd. 2015;644:317–323.
- Duchatelet A, Savidand G, Vannier RN, et al. Optimization of MoSe2 formation for Cu(In,Ga)Se2-based solar cells by using thin superficial molybdenum oxide barrier layers. Thin Solid Films. 2013;545:94–99.
- Suryawanshi MP, Agawane GL, Bhosale SM, et al. CZTS based thin film solar cells: a status review. Mater Technol. 2013;28(1–2):98–109.
- Arnou P, Cooper CS, Abbas SA, et al. Solution processing of CuIn(S,Se)2 and Cu(In,Ga)(S,Se)2 thin film solar cells using metal chalcogenide precursors. Thin Solid Films. 2016;633:76–80.
- Nam J, Kang Y, Kim D, et al. The oxidation effect of a Mo back contact on Cu(In,Ga)(Se,S)2 thin-film solar modules. Sol Energy Mater Sol Cells. 2016;144:445–450.
- Li W, Han X, Zhao Y, et al. Pre-annealing induced oxide barrier to suppress the over-selenization of Mo contact. J Mater Sci Mater Electron. 2016;27(11):11188–11191.
- Kubaschewski KHOKO. Thermochemical properties of inorganic substances. 2nd ed. Berlin: Springer-Verlag; 1991.
- Ramanujam J, Singh UP. Copper indium gallium selenide based solar cells – review. Energy Environ Sci. 2017;10:1306–1319.