Referance
- Nikolaou VS. Common controversies in total knee replacement surgery: current evidence. World J Orthop. 2014;5(4):460–468.
- Dalury DF, Pomeroy DL, Gorab RS. Why are total knee arthroplasties being revised? J Arthroplasty. 2013;28(8):120–121.
- Calliess T, Schado S, Richter BI, et al. Quadriceps force during knee extension in different replacement scenarios with a modular partial prosthesis. Clin Biomech. 2014;29(2):218–222.
- Abdel-Jaber S, Belvedere C, Leardini A, et al. Wear simulation of total knee prostheses using load and kinematics waveforms from stair climbing. J Biomech. 2015;48(14):3830–3836. .
- Verstraete MA, Victor J. Possibilities and limitations of novel in-vitro knee simulator. J Biomech. 2015;48(12):3377–3382.
- Romeo A. Design and development of a knee simulator device. PhD Thesis. Politecnico Di Torino University Belgium; 2015.
- Campbell N. Design of knee simulator for the testing of total knee prosthesis. PhD Thesis. Cape Town University South Africa; 2008.
- Walker PS, Lowry MT, Yildirim G, et al. Kinematic differences in posterior stabilized total knees determined by a holistic experimental evaluation method. J Med Devices. 2013;7(3):030907.
- Schwenke T, Orozco D, Schneider E, et al. Differences in wear between load and displacement control tested total knee replacements. Wear. 2009;267(5–8):757–762.
- DesJardins JD, Walker PS, Haider H, et al. The use of a force-controlled dynamic knee simulator to quantify the mechanical performance of total knee replacement designs during functional activity. J Biomech. 2000;33(10):1231–1242.
- Lancin P, Essner A, Yau SS, et al. Wear performance of 1900 direct compression molded, 1020 direct compression molded, and 1020 sheet compression molded UHMWPE under knee simulator testing. Wear. 2007;263(7–12):1030–1033.
- Flannery M, McGloughlin T, Jones E, et al. Analysis of wear and friction of total knee replacements: part I. Wear assessment on a three station wear simulator. Wear. 2008;265(7–8):999–1008.
- De Jongh. D Control of knee flexion aim a knee simulator. PhD Thesis. Gent University Belgium; 2013.
- ISO. Loading and displacement parameters for wear-testing machines with displacemet control and corresponding environmental conditions for test. ISO 14243-3. International Organization for Standardization; 2014.
- Shı J. Finite element analysis of total knee replacement considering gait cycle load and malalıgnment. PhD Thesis. Wolverhampton University England; 2007.
- Bahce E, Emir E. Manufacturing and design of knee joint prosthesis wear simulator. Ordu Univ J Sci Technol. 2018;8(2):187–194.
- Johnston H, Abdelgaied A, Pandit H, et al. Representing the effect of variation in soft tissue constraints in experimental simulation of total knee replacements. J Mech Behav Biomed Mater. 2018;87:87–94.
- Cherian JJ, Kapadia BH, Banerjee S, et al. Kinematic Axis in TKA: concepts and practical applications. Curr Rev Musculoskelet Med. 2014;7(2):89–95.
- Cheng HJ, Hsiau SS. The study of granular agglomeration mechanism. Powder Technol. 2010;199(3):272–283.