Strain rate and temperature sensitivity on the flow behaviour of a duplex stainless steel during hot deformation

References

• Lee S, Lee S, De Cooman B. Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning. Scr Mater. 2011;65(3):225–10.
   Web of Science ®Google Scholar
• Shi J, Sun X, Wang M, et al. Enhanced work-hardening behaviors and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite. Scr Mater. 2010;63(8):815–818.
   Web of Science ®Google Scholar
• Nakada N, Mizutani K, Tsuchiyama T, et al. Difference in transformation behavior between ferrite and austenite formations in medium manganese steel. Acta Mater. 2014;65:251–258.
   Web of Science ®Google Scholar
• Lee S, Lee S, Kumar S, et al. Localized deformation in multiphase ultra-fine-grained 6 pct Mn transformation-induced plasticity steel. Metall. Mater Trans A. 2011;42A:3638–3651.
   Web of Science ®Google Scholar
• Li Z, Misra RDK, Ding H, et al. The significant impact of pre-strain on the structure-mechanical properties relationship in cold-rolled medium manganese TRIP steel. Mater Sci Eng A. 2018;712:206–213.
   Web of Science ®Google Scholar
• Cao R, Liang J, Li F, et al. Intercritical annealing processing and a new type of quenching and partitioning processing, actualized by combining intercritical quenching and tempering, for medium manganese lightweight steel. Steel Res Inter. 2019;1900335. 1–7.
   Google Scholar
• Yan N, Di H, Misra RDK, et al. Enhancing austenite stability in a new medium-Mn steel by combining deep cryogenic treatment and intercritical annealing: an experimental and theoretical study. Mater Sci Eng A. 2019;75:11–21.
   Google Scholar
• Tsuchiyama T, Inoue T, Tobata J, et al. Microstructure and mechanical properties of a medium manganese steel treated with interrupted quenching and intercritical annealing. Scr Mater. 2016;12:236–239.
   Google Scholar
• Li Z, Zhang X, Mou Y, et al. The impact of intercritical annealing in conjunction with warm deformation process on microstructure, mechanical properties and TRIP effect in medium-Mn TRIP steels. Mater Sci Eng A. 2019;746:363–371.
   Web of Science ®Google Scholar
• Qi X, Du L, Hu J, et al. Effect of austenite stability on toughness, ductility, and work-hardening of medium-Mn steel. Mater Sci Technol. 2019;35(17):2134–2142.
   Web of Science ®Google Scholar
• Su G, Gao X, Zhang D, et al. Impact of reversed austenite on the impact toughness of the high-strength steel of low carbon medium manganese. JOM. 2018;70(5):672–679.
   Web of Science ®Google Scholar
• Yamanaka S, Iwamoto T, Sawa T. Study on capturing transformation thermomechanical behaviour of TRIP steel during impact compression. Mater Res Innov. 2011;15(sup1):131–134.
   Web of Science ®Google Scholar
• Zhao K, Chang Y, Hu P, et al. Influence of rapid cooling pretreatment on microstructure and mechanical property of hot stamped AHSS part. J Mater Process Tech. 2016;228:68–75.
   Web of Science ®Google Scholar
• Li X, Chang Y, Wang C, et al. Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties. Mater Sci Eng A. 2017;679:240–248.
   Web of Science ®Google Scholar
• Wu Z, Tang Y, Chen W, et al. Exploring the influence of Al content on the hot deformation behavior of Fe-Mn-Al-C steels through 3D processing map. Vacuum. 2019;159:447–455.
   Web of Science ®Google Scholar
• Liang Z, Li Y, Huang M. The respective hardening contributions of dislocations and twins to the flow stress of a twinning-induced plasticity steel. Scr Mater. 2016;112:28–31.
   Web of Science ®Google Scholar
• Han J, Nam J, Lee Y. The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel. Acta Mater. 2016;113:1–10.
   Web of Science ®Google Scholar
• Kamoutsi H, Gioti E, Ding H. Kinetics of solute partitioning during intercritical annealing of a medium-Mn steel. Mater Trans A. 2015;46A:4841–4846.
   Web of Science ®Google Scholar
• Srivastava A, Bhattacharjee D, Jha, et al. Microstructural and mechanical characterization of C-Mn-Al-Si cold-rolled TRIP-aided steel. Mater Sci Eng A. 2007;445-446:549–557.
   Web of Science ®Google Scholar
• Dijk N, Butt A, Zhao L, et al. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling. Acta Mater. 2005;53(20):5439–5447.
   Web of Science ®Google Scholar
• Challa V, Wan X, Somani M, et al. Significance of interplay between austenite stability and deformation mechanisms in governing three-stage work hardening behavior of phase-reversion induced nanograined/ultrafine-grained (NG/UFG) stainless steels with high strength-high ductility combination. Scr Mater. 2014;86:60–63.
   Web of Science ®Google Scholar
• Li Z, Zhang X, Mou Y, et al. Design of an effective heat treatment involving intercritical hardening for high strength-high elongation of 0.2C-1.5Al-(6- 8.5)Mn-Fe TRIP steels: microstructural evolution and deformation behavior. Mater Sci Technol. 2020;36(4):500–510.
   Web of Science ®Google Scholar
• Wei X, Fu R, Li L. Tensile deformation behavior of cold-rolled TRIP- aided steels over large range of strain rates. Mater Sci Eng A. 2007;465(1–2):260–266.
   Web of Science ®Google Scholar
• Tian R, Li L, Wei X, et al. Effect of temperature and strain rate on dynamic properties of low silicon TRIP steel. J Iron steel Res. Inter. 2006;13(3):51–56.
   Web of Science ®Google Scholar
• Kim M, Park T, Baik K, et al. Crucial microstructural feature to determine the impact toughness of intercritically annealed medium-Mn steel with triplex-phase microstructure. Acta Mater. 2019;164:122–134.
   Web of Science ®Google Scholar
• Han J, Silva A, Ponge D, et al. The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel. Acta. Mater. 2017;122:199–206.
   Google Scholar
• Kuzmina M, Ponge D, Raabe D. Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: example of a 9 wt.% medium Mn steel. Acta. Mater. 2015;86:182–192.
   Google Scholar
• Lacroix G, Pardoen T, Jacques P. The fracture toughness of TRIP-assisted multiphase steels. Acta Mater. 2008;56(15):3900–3913.
   Web of Science ®Google Scholar
• Neeraj T, Srinivasan R, Li J. Hydrogen embrittlement of ferritic steels: observations on deformation microstructure, nanoscale dimples and failure by nanovoiding. Acta Mater. 2012;60(13–14):5160–5171.
   Web of Science ®Google Scholar
• Misra RDK, Challa VSA, Injeti VSY. Phase reversion-induced nanostructured austenitic alloys: an overview[J]. Mater Technol. 2022;37(7):2983–2994.
   Web of Science ®Google Scholar
• Das A, Tarafder S. Geometry of dimples and its correlation with mechanical properties in austenitic stainless steel. Scr Mater. 2008;59(9):1014–1017.
   Web of Science ®Google Scholar