References
- Beek, J. F.; Blokland, P.; Posthumus, P.; Aalders, M.; Pickering, J. W.; Sterenborg, H. J. C. M.; van Gemert, M. J. C. In Vitro Double-Integrating-Sphere Optical Properties of Tissues between 630 and 1064 nm. Phys. Med. Biol. 1997, 42, 2255–2261. DOI: 10.1088/0031-9155/42/11/017.
- Pickering, J. W.; Prahl, S. A.; van Wieringen, N.; Beek, J. F.; Sterenborg, H. J. C. M.; van Gemert, M. J. C. Double-Integrating-Sphere System for Measuring the Optical Properties of Tissue. Appl. Opt. 1993, 32, 399–410. DOI: 10.1364/AO.32.000399.
- Prahl, S. A.; van Gemert, M. J. C.; Welch, A. J. Determining the Optical Properties of Turbid Media by Using the Adding–Doubling Method. Appl. Opt. 1993, 32, 559–568. DOI: 10.1364/AO.32.000559.
- Zhang, C.; Anzalone, N. C.; Faria, R. P.; Pearce, J. M. Open-Source 3D-Printable Optics Equipment. PLoS One 2013, 8, e59840. DOI: 10.1371/journal.pone.0059840.
- Baden, T.; Chagas, A. M.; Gage, G.; Marzullo, T.; Prieto-Godino, L. L.; Euler, T. Open Labware: 3-D Printing Your Own Lab Equipment. PLoS Biol. 2015, 13, e1002086. DOI: 10.1371/journal.pbio.1002086.
- Wijnen, B.; Hunt, E. J.; Anzalone, G. C.; Pearce, J. M. Open-Source Syringe Pump Library. PLoS One. 2014, 9, e107216. DOI: 10.1371/journal.pone.0107216.
- Salazar-Serrano, L. J.; Torres, J. P.; Valencia, A. A 3D Printed Toolbox for Opto-Mechanical Components. PLoS One 2017, 12, e0169832. DOI: 10.1371/journal.pone.0169832.
- Tomes, J. J.; Finlayson, C. E. Low Cost 3D-Printing Used in an Undergraduate Project: An Integrating Sphere for Measurement of Photoluminescence Quantum Yield. Eur. J. Phys. 2016, 37, 1–14.
- Storm, S. L.; Springsteen, A. The Integrating Sphere Reflectance Accessory. Labsphere, 1998, Application Note n° 03, 1–7.
- Hanssen, L. M.; Snail, K. A. Integrating Spheres for Mid- and near-Infrared Reflection Spectroscopy. In Handbook of Vibrational Spectroscopy 2001; pp 1221–1239.
- Prahl, S. A. Everything I Think You Should Know about Inverse Adding-Doubling. Oregon Medical Laser Center, St. Vincent Hospital, 2011; Vol. 1344; pp 1–74.
- Knighton, N.; Bugbee, B. A Mixture of Barium Sulfate and White Paint is a Low-Cost Substitute Reflectance Standard for Spectralon ®. Techniques and Instruments 2005, paper 11; pp 4–6.
- Moffitt, T. P. Compact Fiber-Optic Diffuse Reflection Probes for Medical Diagnostics. PhD. Thesis, Western Washington University, Bellingham, WA, 2007; pp 1–73.
- Dayton, A. L.; Prahl, S. A. Turbid-Polyurethane Phantom for Microscopy. In SPIE Proceddings: Design and Performace Validation of Phantoms Used in Conjunction with Optical Measurements of Tissue, 2008, Vol. 6870; pp 1–7.
- Moffitt, T.; Chen, Y. C.; Prahl, S. A.; Preparation and Characterization of Polyurethane Optical Phantoms. J. Biomed. Opt. 2006, 11, 041103. DOI: 10.1117/1.2240972.
- Bouchard, J. P.; Veilleux, I.; Jedidi, R.; Noiseux, I.; Fortin, M.; Mermut, O. Reference Optical Phantoms for Diffuse Optical spectroscopy. Part 1-Error analysis of a time resolved transmittance characterization method. Opt. Express 2010, 18, 11495–11507. DOI: 10.1364/OE.18.011495.
- Hale, G. M.; Querry, M. R. Optical Constants of Water in the 200-nm to 200-μm Wavelength Region. Appl. Opt. 1973, 12, 555–563. DOI: 10.1364/AO.12.000555.
- DeThomas, F. A.; Hall, J. W.; Monfre, S. L. Real-Time Monitoring of Polyurethane Production Using near-Infrared Spectroscopy. Talanta 1994, 41, 425–431. DOI: 10.1016/0039-9140(93)E0055-I.