Effect of ventilation mode and airflow rate on the flow field and particle mass concentration distribution of a high-speed rail carriage in the putty polishing workshop

References

• Liang WH. Volatile organic compounds, odor, and inhalation health risks during interior construction of a fully furnished residential unit in Nanjing, China. Building Environ. 2020;186:107366. doi:10.1016/j.buildenv.2020.107366
   Web of Science ®Google Scholar
• Youcai Z, Sheng H. Sampling techniques and equipment for construction and demolition waste. In: Youcai Z, Sheng H, editors. Pollution control and resource recovery. Oxford: Butterworth-Heinemann; 2017. p. 15–33.
   Google Scholar
• Gualtieri AF. Mineral fibre-based building materials and their health hazards. In: Pacheco-Torgal F, Jalali S, Fucic A, editors. Toxicity of building materials. Cambridge: Woodhead; 2012. p. 166–195.
   Google Scholar
• Garg M, Minocha AK, Jain N. Environment hazard mitigation of waste gypsum and chalk: use in construction materials. Constr Building Mater. 2011;25(2):944–949. doi:10.1016/j.conbuildmat.2010.06.088
   Web of Science ®Google Scholar
• Du T, Nie W, Chen DW, et al. CFD modeling of coal dust migration in an 8.8-meter-high fully mechanized mining face. Energy. 2020;212:118616. doi:10.1016/j.energy.2020.118616
   Web of Science ®Google Scholar
• Cai P, Nie W, Liu ZY, et al. Study on the air curtain dust control technology with a dust purifying fan for fully mechanized mining face. Powder Technol. 2020;374:507–521. doi:10.1016/j.powtec.2020.06.082
   Web of Science ®Google Scholar
• Gilani S, Montazeri H, Blocken B. CFD simulation of stratified indoor environment in displacement ventilation: validation and sensitivity analysis. Building Environ. 2016;95:299–313. doi:10.1016/j.buildenv.2015.09.010
   Web of Science ®Google Scholar
• Wu J, Shen HG, Zhan XF. Control strategies to reduce occupational dust exposure at a mechanical grinding workshop. Indoor Built Environ. 2020;420326X20946414.
   Google Scholar
• Yang B, Zhou B, Su W, et al. Influence of relayed fans and low level exhausts on performance of attachment ventilation under heating mode. J Building Eng. 2021;36:102155. doi:10.1016/j.jobe.2021.102155
   Web of Science ®Google Scholar
• Mi HF, Liu YL, Jiao ZR, et al. A numerical study on the optimization of ventilation mode during emergency of cable fire in utility tunnel. Tunnelling Underground Space Technol. 2020;100:103403. doi:10.1016/j.tust.2020.103403
   Web of Science ®Google Scholar
• Lv Y, Wang HF, Zhou YW, et al. The influence of ventilation mode and personnel walking behavior on distribution characteristics of indoor particles. Building Environ. 2019;149:582–591. doi:10.1016/j.buildenv.2018.12.057
   Web of Science ®Google Scholar
• Chang Z, Yi K, Liu W. A new ventilation mode of air conditioning in subway vehicles and its air distribution performance. Energy Built Environ. 2021;2(1):94–104. doi:10.1016/j.enbenv.2020.06.005
   Google Scholar
• Zeng LJ, Liu GD, Gao J, et al. A circulating ventilation system to concentrate pollutants and reduce exhaust volumes: case studies with experiments and numerical simulation for the rubber refining process. J Building Eng. 2021;35:101984. doi:10.1016/j.jobe.2020.101984
   Web of Science ®Google Scholar
• Wiriyasart S, Naphon P. Numerical study on air ventilation in the workshop room with multiple heat sources. Case Stud Therm Eng. 2019;13:100405. doi:10.1016/j.csite.2019.100405
   Web of Science ®Google Scholar
• Jiao ZR, Yuan S, Ji CX, et al. Optimization of dilution ventilation layout design in confined environments using computational fluid dynamics (CFD). J Loss Prev Process Ind. 2019;60:195–202. doi:10.1016/j.jlp.2019.05.002
   Web of Science ®Google Scholar
• Chen J, Jiang ZA, Chen J. Effect of inlet air volumetric flow rate on the performance of a two-stage cyclone separator. ACS Omega. 2018;3(10):13219–13226. doi:10.1021/acsomega.8b02043
   PubMed Web of Science ®Google Scholar
• Cao GY, Awbi H, Yao RM, et al. A review of the performance of different ventilation and airflow distribution systems in buildings. Building Environ. 2014;73:171–186. doi:10.1016/j.buildenv.2013.12.009
   Web of Science ®Google Scholar
• Murga A, Long Z, Yoo S-J, et al. Decreasing inhaled contaminant dose of a factory worker through a hybrid emergency ventilation system: performance evaluation in worst-case scenario. Energy Built Environ. 2020;1(3):319–326. doi:10.1016/j.enbenv.2020.04.007
   Google Scholar
• Nie W, Cheng W, Gang Z. Research and application on external spray secondary dust falling device with negative pressure of roadheader caving face. J China Coal Soc. 2014;39(12):2446–2452.
   Google Scholar
• Nie W, Wei WL, Cai P, et al. Simulation experiments on the controllability of dust diffusion by means of multi-radial vortex airflow. Adv Powder Technol. 2018;29(3):835–847. doi:10.1016/j.apt.2017.12.027
   Web of Science ®Google Scholar
• Ma Q, Nie W, Yang S, et al. Effect of spraying on coal dust diffusion in a coal mine based on a numerical simulation. Environ. Pollut. 2020;264:114717. doi:10.1016/j.envpol.2020.114717
   PubMed Web of Science ®Google Scholar
• Sa ZY, Li F, Qin B, et al. Numerical simulation study of dust concentration distribution regularity in cavern stope. Saf Sci. 2012;50(4):857–860. doi:10.1016/j.ssci.2011.08.019
   Web of Science ®Google Scholar
• Siadaty M, Kheradmand S, Ghadiri F. Study of inlet temperature effect on single and double inlets cyclone performance. Adv Powder Technol. 2017;28(6):1459–1473. doi:10.1016/j.apt.2017.03.015
   Web of Science ®Google Scholar
• Azadi M, Azadi M, Mohebbi A. A CFD study of the effect of cyclone size on its performance parameters. J. Hazard Mater. 2010;182(1):835–841. doi:10.1016/j.jhazmat.2010.06.115
   PubMed Web of Science ®Google Scholar
• Wu YY, Liu ZW, Chen YC, et al. Investigation of velocity distribution and turbulence characteristics in subcritical circular open channel flows using a modified Reynolds stress model. J Hydro-Environ Res. 2018;19:68–77. doi:10.1016/j.jher.2018.02.002
   Web of Science ®Google Scholar
• Parekh J, Rzehak R. Euler-Euler multiphase CFD-simulation with full Reynolds stress model and anisotropic bubble-induced turbulence. Int J Multiphase Flow. 2018;99:231–245. doi:10.1016/j.ijmultiphaseflow.2017.10.012
   Web of Science ®Google Scholar
• Beinert S, Gothsch T, Kwade A. Numerical evaluation of stresses acting on particles in high-pressure microsystems using a Reynolds stress model. Chem Eng Sci. 2015;123:197–206. doi:10.1016/j.ces.2014.10.042
   Web of Science ®Google Scholar
• Wasilewski M, Brar LS. Effect of the inlet duct angle on the performance of cyclone separators. Sep Purif Technol. 2019;213:19–33. doi:10.1016/j.seppur.2018.12.023
   Web of Science ®Google Scholar
• Wang YP, Jiang ZG, Wang JZ, et al. The visualization study of dust pollution generated during unloading of the multi-level in high ore pass based on CPFD software and similar experiments. J Cleaner Prod. 2020;256:120371. doi:10.1016/j.jclepro.2020.120371
   Web of Science ®Google Scholar