References
- Affum H. 2015. Numerical simulation of dispersion of emissions from Tema Oil Refinery in Ghana. University of Ghana. Retrieved June 2, 2017, from http://webcache.googleusercontent.com/search?q=cache:i8sdJ_9BUYwJ:ugspace.ug.edu
- Agarwal A, Mangal A, Satsangi A, et al. 2017. Characterization, sources and health risk analysis of PM2.5 bound metals during foggy and non-foggy days in sub-urban atmosphere of Agra. Atmos Res 197:121–31. doi:10.1016/j.atmosres.2017.06.027
- Arku RE, Vallarino J, Dionisio KL, et al. 2008. Characterizing air pollution in two low-income neighborhoods in Accra, Ghana. Sci Total Environ 402(2–3):217–31. doi:10.1016/j.scitotenv.2008.04.042
- Baawain M, Al-Mamun A, Omidvarborna H, et al. 2017. Assessment of hydrogen sulfide emission from a sewage treatment plant using AERMOD. Environ Monit Assess 189(6):263. doi:10.1007/s10661-017-5983-6
- Balasubramanian R, Gao X, Hatakeyama S, et al. 2017. Overview of the special issue “PM2.5 in Asia” for 2015 Asian Aerosol Conference. Aerosol Air Qual Res 17(2):351–5. doi:10.4209/aaqr.2017.01.0042
- Berdowski J, Guicherit R, and Heij B ( eds.). 2001. The climate system. Balkema, Lisse
- Breeze Aermod. 2017. Model-Ready Meteorological Data | BREEZE Software. Retrieved June 2, 2017, from http://www.breeze-software.com/Data/Meteorological/
- Callén MS, Iturmendi A, and López JM. 2014. Source apportionment of atmospheric PM2.5-bound polycyclic aromatic hydrocarbons by a PMF receptor model. Assessment of potential risk for human health. Environ Pollut 195:167–77. doi:10.1016/j.envpol.2014.08.025
- Chen F, Zhang X, Zhu X, et al. 2017. Chemical characteristics of PM2.5 during a 2016 winter haze episode in Shijiazhuang, China. Aerosol Air Qual Res 17(2):368–80. doi:10.4209/aaqr.2016.06.0274
- Daly A, and Zannetti P. 2007. Air pollution modeling–An overview. Ambient Air Pollut, Chapter 2, 15–28. Retrieved June 2, 2017, from home.iitk.ac.in/∼anubha/Modeling.pdf
- Dodla VBR, Gubbala CS, and Desamsetti S. 2017. Atmospheric dispersion of PM2.5 precursor gases from two major thermal power plants in Andhra Pradesh, India. Aerosol Air Qual Res 17(2):381–93. doi:10.4209/aaqr.2016.07.0294
- EPA Ghana. 2017. Ghana Environmental Protection Agency – EPA guidelines Report.pdf. Retrieved August 17, 2017, from http://www.epa.gov.gh/ghanalex/policies/EPAguidelines%20Report.pdf
- European Commission. 2016. Standards – Air Quality – Environment – European Commission. Retrieved July 31, 2017, from http://ec.europa.eu/environment/air/quality/standards.htm
- Fotourehchi Z. 2016. Health effects of air pollution: An empirical analysis for developing countries. Atmos Pollut Res 7(1):201–6. doi:10.1016/j.apr.2015.08.011
- Gao P, Lei T, Jia L, et al. 2017. Exposure and health risk assessment of PM2.5-bound trace metals during winter in university campus in Northeast China. Sci Total Environ 576:628–36. doi:10.1016/j.scitotenv.2016.10.126
- Ghana Statistical Service. 2010. Ghana Statistical Service: Tema Metropolitan. Retrieved August 12, 2017, from http://www.statsghana.gov.gh/docfiles/2010_District_Report/Greater%20Accra/Tema%20Metro.pdf
- Gibson MD, Kundu S, and Satish M. 2013. Dispersion model evaluation of PM2.5, NOx and SO2 from point and major line sources in Nova Scotia, Canada using AERMOD Gaussian plume air dispersion model. Atmos Pollut Res 4(2):157–67. doi:10.5094/APR.2013.016
- GMET. 2016. Weather information. Retrieved July 27, 2016, from http://www.meteo.gov.gh/website/index.php?option=com_content&view=category&id=38&Itemid=54
- Government of Canada. 2013. Environment and Climate Change Canada – Canadian Ambient Air Quality Standards. Retrieved August 17, 2017, from http://www.ec.gc.ca/default.asp?lang=En&n=56D4043B-1&news=A4B2C28A-2DFB-4BF4-8777-ADF29B4360BD
- Gulia S, Shiva Nagendra SM, Khare M, et al. 2015. Urban air quality management-A review. Atmos Pollut Res 6(2):286–304. doi:10.5094/APR.2015.033
- IARC. 2017. International Agency for Research on Cancer (IARC): Monographs- Classifications. Retrieved August 13, 2017, from http://monographs.iarc.fr/ENG/Classification/latest_classif.php
- Kakosimos KE, Assael MJ, and Katsarou AS. 2011. Application and evaluation of AERMOD on the assessment of particulate matter pollution caused by industrial activities in the Greater Thessaloniki area. Environ Technol 32(6):593–608. doi:10.1080/09593330.2010.506491
- Kim H, Kim H, Park Y, et al. 2017. Assessment of temporal variation for the risk of particulate matters on asthma hospitalization. Environ Res 156:542–50. doi:10.1016/j.envres.2017.04.012
- Kumar A, Patil RS, Dikshit AK, et al. 2017. Application of WRF model for air quality modelling and AERMOD – A survey. Aerosol Air Qual Res 17(7):925–37. doi:10.4209/aaqr.2016.06.0265
- Kumar A, Patil RS, Dikshit AK, et al. 2016. Assessment of impact of unaccounted emission on ambient concentration using DEHM and AERMOD in combination with WRF. Atmos Environ 142:406–13. doi:10.1016/j.atmosenv.2016.08.024
- Lang J, Zhang Y, Zhou Y, et al. 2017. Trends of PM2.5 and chemical composition in Beijing, 2000–2015. Aerosol Air Qual Res 17(2):412–25. doi:10.4209/aaqr.2016.07.0307
- Lee H, Yoo J, Kang M, et al. 2014. Evaluation of concentrations and source contribution of PM10 and SO2 emitted from industrial complexes in Ulsan, Korea: Interfacing of the WRF–CALPUFF modeling tools. Atmos Pollut Res 5(4):664–76. doi:10.5094/APR.2014.076
- Michanowicz DR, Shmool JLC, Tunno BJ, et al. 2016. A hybrid land use regression/AERMOD model for predicting intra-urban variation in PM2.5. Atmos Environ 131:307–15. doi:10.1016/j.atmosenv.2016.01.045
- Misawa K, Yoshino A, Takami A, et al. 2017. Continuous observation of the mass and chemical composition of PM2.5 using an automatic analyzer in Kumamoto, Japan. Aerosol Air Qual Res 17(2):444–52. doi:10.4209/aaqr.2016.07.0290
- Mokhtar MM, Hassim MH, and Taib RM. 2014. Health risk assessment of emissions from a coal-fired power plant using AERMOD modelling. Proc Saf Environ Prot 92(5):476–85. doi:10.1016/j.psep.2014.05.008
- Nyarko BJB, Adomako D, Serfor-Armah Y, et al. 2006. Biomonitoring of atmospheric trace element deposition around an industrial town in Ghana. Radiat Phys Chem 75(9):954–8. doi:10.1016/j.radphyschem.2005.08.021
- Ofosu FG, Hopke PK, Aboh IJK, et al. 2012. Characterization of fine particulate sources at Ashaiman in Greater Accra, Ghana. Atmos Pollut Res 3(3):301–10. doi:10.5094/APR.2012.033
- Omidvarborna H, Kumar A, and Kim DS. 2014. Characterization of particulate matter emitted from transit buses fueled with B20 in idle modes. J Environ Chem Eng 2(4):2335–42. doi:10.1016/j.jece.2014.09.020
- Omidvarborna H, Kumar A, and Kim DS. 2015. Recent studies on soot modeling for diesel combustion. Renewable Sustainable Energy Rev 48:635–47. doi:10.1016/j.rser.2015.04.019
- Omidvarborna H, Kumar A, and Kim DS. 2016. Variation of diesel soot characteristics by different types and blends of biodiesel in a laboratory combustion chamber. Sci Total Environ 544:450–9. doi:10.1016/j.scitotenv.2015.11.076
- Ostro B. 2004. Outdoor air pollution: Assessing the environmental burden of disease at national and local levels. World Health Organ, 5:1–54 Available at http://www.who.int/quantifying_ehimpacts/publications/ebd5.pdf
- Rooney MS, Arku RE, Dionisio KL, et al. 2012. Spatial and temporal patterns of particulate matter sources and pollution in four communities in Accra, Ghana. Sci Total Environ 435–436:107–14. doi:10.1016/j.scitotenv.2012.06.077
- Sosa BS, Porta A, Colman Lerner JE, et al. 2017. Human health risk due to variations in PM10-PM2.5 and associated PAHs levels. Atmos Environ 160:27–35. doi:10.1016/j.atmosenv.2017.04.004
- Tartakovsky D, Broday DM, and Stern E. 2013. Evaluation of AERMOD and CALPUFF for predicting ambient concentrations of total suspended particulate matter (TSP) emissions from a quarry in complex terrain. Environ Pollut 179:138–45. doi:10.1016/j.envpol.2013.04.023
- Tema Oil Refinery. 2017. Company Profile – Tema Oil Refinery – TOR. Retrieved August 12, 2017, from http://www.tor.com.gh/about-tor/company-profile/
- US EPA. 2016. Air Quality Dispersion Modeling - Screening Models [Data and Tools]. Retrieved December 6, 2017, from https://www.epa.gov/scram/air-quality-dispersion-modeling-screening-models
- USEPA. 2017a. Aluminum phosphide (CASRN 20859-73-8) | IRIS | US EPA – 0005_summary.pdf. Retrieved August 20, 2017, from https://cfpub.epa.gov/ncea/iris/iris_documents/documents/subst/0005_summary.pdf
- USEPA. 2017b. Conducting a Human Health Risk Assessment | Risk Assessment | US EPA. Retrieved August 13, 2017, from https://www.epa.gov/risk/conducting-human-health-risk-assessment
- USEPA. 2017c. Particulate Matter (PM) Basics | Particulate Matter (PM) Pollution | US EPA. Retrieved August 5, 2017, from https://www.epa.gov/pm-pollution/particulate-matter-pm-basics#
- WHO. 2005. WHO Air quality guidelines for particulate matter, ozone, nitrogen dioxide and sulfur dioxide. World Health Organ Retrieved from http://apps.who.int/iris/bitstream/10665/69477/1/WHO_SDE_PHE_OEH_06.02_eng.pdf
- WHO. 2016. WHO | Ambient (outdoor) air quality and health, pp. 3–20. Retrieved May 4, 2017, from http://www.who.int/mediacentre/factsheets/fs313/en/
- Xu H, Ho SSH, Cao J, et al. 2017. A 10-year observation of PM2.5-bound nickel in Xi'an, China: Effects of source control on its trend and associated health risks, 7:1–10. Sci Rep 7
- Zhou P, Guo J, Zhou X, et al. 2014. PM2.5, PM10 and health risk assessment of heavy metals in a typical printed circuit boards manufacturing workshop. J Environ Sci 26(10):2018–26. doi:10.1016/j.jes.2014.08.003
- Zhou Z, Dionisio KL, Verissimo TG, et al. 2013. Chemical composition and sources of particle pollution in affluent and poor neighborhoods of Accra, Ghana. Environ Res Lett 8(4):044025. doi:10.1088/1748-9326/8/4/044025