Two-dimensional printing of nanoparticles as a promising therapeutic method for personalized drug administration

References

• Acosta-Vélez GF, Zhu TZ, Linsley CS, Wu BM. 2018. Photocurable poly(ethylene glycol) as a bioink for the inkjet 3D pharming of hydrophobic drugs. Int J Pharm. 546(1–2):145–153. doi:10.1016/j.ijpharm.2018.04.056.
   PubMedGoogle Scholar
• Ahire E, Thakkar S, Darshanwad M, Misra M. 2018. Parenteral nanosuspensions: a brief review from solubility enhancement to more novel and specific applications. Acta Pharm Sin B. 8(5):733–755. doi:10.1016/j.apsb.2018.07.011.
   PubMed Web of Science ®Google Scholar
• Akagi T, Fujiwara T, Akashi M. 2014. Inkjet Printing of Layer-by-Layer Assembled Poly(lactide) Stereocomplex with Encapsulated Proteins. Langmuir. 30(6):1669–1676. doi:10.1021/la404162h.
   PubMed Web of Science ®Google Scholar
• Alexander KS, Haribhakti RP, Parker GA. 1991. Stability of acetazolamide in suspension compounded from tablets. Am J Hosp Pharm. 48(6):1241–1244. doi:10.1093/ajhp/48.6.1241.
   PubMedGoogle Scholar
• Alhnan MA, Okwuosa TC, Sadia M, Wan K-W, Ahmed W, Arafat B. 2016. Emergence of 3D Printed Dosage Forms: opportunities and Challenges. Pharm Res. 33(8):1817–1832. doi:10.1007/s11095-016-1933-1.
   PubMed Web of Science ®Google Scholar
• Ali M. 2023. What function of nanoparticles is the primary factor for their hyper-toxicity? Adv Colloid Interface Sci. 314:102881. doi:10.1016/j.cis.2023.102881.
   PubMed Web of Science ®Google Scholar
• Alomari M, Mohamed FH, Basit AW, Gaisford S. 2015. Personalised dosing: printing a dose of one’s own medicine. Int J Pharm. 494(2):568–577. doi:10.1016/j.ijpharm.2014.12.006.
   PubMed Web of Science ®Google Scholar
• Alomari M, Vuddanda PR, Trenfield SJ, Dodoo CC, Velaga S, Basit AW, Gaisford S. 2018. Printing T3 and T4 oral drug combinations as a novel strategy for hypothyroidism. Int J Pharm. 549(1-2):363–369. doi:10.1016/j.ijpharm.2018.07.062.
   PubMedGoogle Scholar
• Alva C, Vidakovic I, Lorber B, Schachner-Nedherer A-L, Zettl M, Khinast J, Prassl R, Hsiao W-K. 2022. Can Liposomes Survive Inkjet Printing? The Effect of Jetting on Key Liposome Attributes for Drug Delivery Applications. J Pharm Innov. accessed 2023 Aug 24 doi:10.1007/s12247-022-09643-z.
   PubMed Web of Science ®Google Scholar
• Araújo MRP, Sa-Barreto LL, Gratieri T, Gelfuso GM, Cunha-Filho M. 2019. The Digital Pharmacies Era: how 3D Printing Technology Using Fused Deposition Modeling Can Become a Reality. Pharmaceutics. 11(3):128. doi:10.3390/pharmaceutics11030128.
   PubMed Web of Science ®Google Scholar
• Arshad MS, Shahzad A, Abbas N, AlAsiri A, Hussain A, Kucuk I, Chang M-W, Bukhari NI, Ahmad Z. 2020. Preparation and characterization of indomethacin loaded films by piezoelectric inkjet printing: a personalized medication approach. Pharm Dev Technol. 25(2):197–205. doi:10.1080/10837450.2019.1684520.
   PubMed Web of Science ®Google Scholar
• Assaifan AK, Al Habis N, Ahmad I, Alshehri NA, Alharbi HF. 2020. Scaling-up medical technologies using flexographic printing. Talanta. 219:121236. doi:10.1016/j.talanta.2020.121236.
   PubMed Web of Science ®Google Scholar
• Azizi Machekposhti S, Movahed S, Narayan RJ. 2020. Physicochemical parameters that underlie inkjet printing for medical applications. Biophys Rev. 1(1):011301. doi:10.1063/5.0011924.
   Google Scholar
• Ballard M, Shafiee A, Grage E, DeMarco M, Atala A, Ghadiri E. 2020. Inkjet Printing of Synthesized Melanin Nanoparticles as a Biocompatible Matrix for Pharmacologic Agents. Nanomaterials (Basel). 10(9):1840. doi:10.3390/nano10091840.
   PubMedGoogle Scholar
• Banaye Yazdipour A, Masoorian H, Ahmadi M, Mohammadzadeh N, Ayyoubzadeh SM. 2023. Predicting the toxicity of nanoparticles using artificial intelligence tools: a systematic review. Nanotoxicology. 17(1):62–77. doi:10.1080/17435390.2023.2186279.
   PubMed Web of Science ®Google Scholar
• Bittner SM, Guo JL, Melchiorri A, Mikos AG. 2018. Three-dimensional Printing of Multilayered Tissue Engineering Scaffolds. Mater Today (Kidlington). 21(8):861–874. doi:10.1016/j.mattod.2018.02.006.
   PubMedGoogle Scholar
• Breitkreutz J, Boos J. 2007. Paediatric and geriatric drug delivery. Expert Opin Drug Deliv. 4(1):37–45. doi:10.1517/17425247.4.1.37.
   PubMed Web of Science ®Google Scholar
• Brustugun J, Notaker N, Paetz LH, Tho I, Bjerknes K. 2020. Adjusting the dose in paediatric care by dispersing fragments of four different aspirin tablets. Acta Paediatr. 109(11):2394–2401. doi:10.1111/apa.15216.
   PubMed Web of Science ®Google Scholar
• Buanz ABM, Saunders MH, Basit AW, Gaisford S. 2011. Preparation of personalized-dose salbutamol sulphate oral films with thermal ink-jet printing. Pharm Res. 28(10):2386–2392. doi:10.1007/s11095-011-0450-5.
   PubMed Web of Science ®Google Scholar
• Chao M, Öblom H, Cornett C, Bøtker J, Rantanen J, Sporrong SK, Genina N. 2021. Data-Enriched Edible Pharmaceuticals (DEEP) with Bespoke Design, Dose and Drug Release. Pharmaceutics. 13(11):1866. doi:10.3390/pharmaceutics13111866.
   PubMed Web of Science ®Google Scholar
• Cheow WS, Kiew TY, Hadinoto K. 2015. Combining inkjet printing and amorphous nanonization to prepare personalized dosage forms of poorly-soluble drugs. Eur J Pharm Biopharm. 96:314–321. doi:10.1016/j.ejpb.2015.08.012.
   PubMed Web of Science ®Google Scholar
• Chou W-H, Gamboa A, Morales JO. 2021. Inkjet printing of small molecules, biologics, and nanoparticles. Int J Pharm. 600:120462. doi:10.1016/j.ijpharm.2021.120462.
   PubMedGoogle Scholar
• Cooley P, Wallace D, Antohe B. 2002. Applicatons of Ink-Jet printing technology to BioMEMS and microfluidic systems. JALA. 7(5):33–39.
   Google Scholar
• Dachtler M, Eggenreich K, Pflieger T. 2021. Digital health - digital 2D/3D printing of personalized medication. SPhERe Proc 4th Int Symp Pharm Eng Res. [accessed 2023 Aug 22]. doi:10.24355/DBBS.084-202110251129-0.
   Google Scholar
• Das B, Baidya ATK, Mathew AT, Yadav AK, Kumar R. 2022. Structural modification aimed for improving solubility of lead compounds in early phase drug discovery. Bioorg Med Chem. 56:116614. doi:10.1016/j.bmc.2022.116614.
   PubMed Web of Science ®Google Scholar
• Derby B. 2010. Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution. Annu Rev Mater Res. [40(1):395–414. accessed 2019 Jun 3] doi:10.1146/annurev-matsci-070909-104502.
   Web of Science ®Google Scholar
• Derby B. 2011. Inkjet printing ceramics: from drops to solid. J Eur Ceram Soc. 31(14):2543–2550. doi:10.1016/j.jeurceramsoc.2011.01.016.
   Web of Science ®Google Scholar
• Derby B, Reis N. 2003. Inkjet Printing of Highly Loaded Particulate Suspensions. MRS Bull. 28(11):815–818. doi:10.1557/mrs2003.230.
   Web of Science ®Google Scholar
• Dong H, Carr WW, Morris JF. 2006. Visualization of drop-on-demand inkjet: drop formation and deposition. Rev Sci Instrum. 77(8):085101. doi:10.1063/1.2234853.
   Web of Science ®Google Scholar
• Doshi P. 2019. Medical devices including medicaments and methods of making and using same. [accessed 2023 Aug 22]. https://patents.google.com/patent/US10188604B2/en?q=(ink-jet+printing+and+drug)&oq=ink-jet+printing+and+drug.
   Google Scholar
• Edinger M, Bar-Shalom D, Sandler N, Rantanen J, Genina N. 2018. QR encoded smart oral dosage forms by inkjet printing. Int J Pharm. 536(1):138–145. doi:10.1016/j.ijpharm.2017.11.052.
   PubMed Web of Science ®Google Scholar
• Eleftheriadis GK, Katsiotis CS, Andreadis DA, Tzetzis D, Ritzoulis C, Bouropoulos N, Kanellopoulou D, Andriotis EG, Tsibouklis J, Fatouros DG. 2020. Inkjet printing of a thermolabile model drug onto FDM-printed substrates: formulation and evaluation. Drug Dev Ind Pharm. 46(8):1253–1264. doi:10.1080/03639045.2020.1788062.
   PubMed Web of Science ®Google Scholar
• Eleftheriadis GK, Monou PK, Bouropoulos N, Boetker J, Rantanen J, Jacobsen J, Vizirianakis IS, Fatouros DG. 2020. Fabrication of Mucoadhesive Buccal Films for Local Administration of Ketoprofen and Lidocaine Hydrochloride by Combining Fused Deposition Modeling and Inkjet Printing. J Pharm Sci. 109(9):2757–2766. doi:10.1016/j.xphs.2020.05.022.
   PubMed Web of Science ®Google Scholar
• Esfandyarpour R, DiDonato MJ, Yang Y, Durmus NG, Harris JS, Davis RW. 2017. Multifunctional, inexpensive, and reusable nanoparticle-printed biochip for cell manipulation and diagnosis. Proc Natl Acad Sci U S A. 114(8):E1306–E1315. doi:10.1073/pnas.1621318114.
   PubMed Web of Science ®Google Scholar
• Essel JT, Ihnen AC, Carter JD. 2014. Production of Naproxen Nanoparticle Colloidal Suspensions for Inkjet Printing Applications. Ind Eng Chem Res. 53(7):2726–2731. doi:10.1021/ie4038517.
   Web of Science ®Google Scholar
• Everett H. 2021. Triastek receives FDA IND clearance for 3D printed drug to treat rheumatoid arthritis. 3D Print Ind. [accessed 2023 Apr 4]. https://3dprintingindustry.com/news/triastek-receives-fda-ind-clearance-for-3d-printed-drug-to-treat-rheumatoid-arthritis-184159/.
   Google Scholar
• FDA. 2015. SPRITAM – Levetiracetam approval document. https://www.accessdata.fda.gov/drugsatfda_docs/nda/2015/207958Orig1s000OtherR.pdf.
   Google Scholar
• Florence AT, Attwood D. 2011. Physicochemical Principles of Pharmacy. 5th Revised edition. London: pharmaceutical Press.
   Google Scholar
• Florence AT, Lee VHL. 2011. Personalised medicines: more tailored drugs, more tailored delivery. Int J Pharm. 415(1-2):29–33. doi:10.1016/j.ijpharm.2011.04.047.
   PubMedGoogle Scholar
• García-Torres BA, Aguilar-Elguezabal A, Román-Aguirre M, Álvarez-Contreras L. 2016. Synthesis of silica aerogels microspheres prepared by ink jet printing and dried at ambient pressure without surface hydrophobization. Mater Chem Phys. 172:32–38. doi:10.1016/j.matchemphys.2015.12.047.
   Web of Science ®Google Scholar
• Gebauer JS, Mackert V, Ognjanović S, Winterer M. 2018. Tailoring metal oxide nanoparticle dispersions for inkjet printing. J Colloid Interface Sci. 526:400–409. doi:10.1016/j.jcis.2018.05.006.
   PubMed Web of Science ®Google Scholar
• Genina N, Fors D, Palo M, Peltonen J, Sandler N. 2013. Behavior of printable formulations of loperamide and caffeine on different substrates–effect of print density in inkjet printing. Int J Pharm. 453(2):488–497. doi:10.1016/j.ijpharm.2013.06.003.
   PubMed Web of Science ®Google Scholar
• Genina N, Fors D, Vakili H, Ihalainen P, Pohjala L, Ehlers H, Kassamakov I, Haeggström E, Vuorela P, Peltonen J, et al. 2012. Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques. Eur J Pharm Sci. 47(3):615–623. doi:10.1016/j.ejps.2012.07.020.
   PubMed Web of Science ®Google Scholar
• Genina N, Janßen EM, Breitenbach A, Breitkreutz J, Sandler N. 2013. Evaluation of different substrates for inkjet printing of rasagiline mesylate. Eur J Pharm Biopharm. 85(3 Pt B):1075–1083. doi:10.1016/j.ejpb.2013.03.017.
   PubMed Web of Science ®Google Scholar
• Goodall S, Chew N, Chan K, Auriac D, Waters MJ. 2002. Aerosolization of protein solutions using thermal inkjet technology. J Aerosol Med. 15(3):351–357. doi:10.1089/089426802760292717.
   PubMedGoogle Scholar
• Goole J, Amighi K. 2016. 3D printing in pharmaceutics: a new tool for designing customized drug delivery systems. Int J Pharm. 499(1-2):376–394. doi:10.1016/j.ijpharm.2015.12.071.
   PubMedGoogle Scholar
• Gupta MS, Kumar TP, Davidson R, Kuppu GR, Pathak K, Gowda DV. 2021. Printing Methods in the Production of Orodispersible Films. AAPS PharmSciTech. 22(3):129. doi:10.1208/s12249-021-01990-3.
   PubMed Web of Science ®Google Scholar
• Hafner A, Lovrić J, Lakoš GP, Pepić I. 2014. Nanotherapeutics in the EU: an overview on current state and future directions. Int J Nanomedicine. 9:1005–1023. doi:10.2147/IJN.S55359.
   PubMed Web of Science ®Google Scholar
• Hasin Y, Seldin M, Lusis A. 2017. Multi-omics approaches to disease. Genome Biol. 18(1):83. doi:10.1186/s13059-017-1215-1.
   PubMed Web of Science ®Google Scholar
• Hejduk A, Lulek J. 2022. Dispensing of minitablets - Has the problem been resolved? Int J Pharm. 619:121666. doi:10.1016/j.ijpharm.2022.121666.
   PubMedGoogle Scholar
• Ho D, Quake SR, McCabe ERB, Chng WJ, Chow EK, Ding X, Gelb BD, Ginsburg GS, Hassenstab J, Ho C-M, et al. 2020. Enabling Technologies for Personalized and Precision Medicine. Trends Biotechnol. 38(5):497–518. doi:10.1016/j.tibtech.2019.12.021.
   PubMed Web of Science ®Google Scholar
• Huang Q, Shen W, Song W. 2012. Synthesis of colourless silver precursor ink for printing conductive patterns on silicon nitride substrates. Appl Surf Sci. 258(19):7384–7388. doi:10.1016/j.apsusc.2012.04.037.
   Web of Science ®Google Scholar
• Ierapetritou M, Muzzio F, Reklaitis G. 2016. Perspectives on the continuous manufacturing of powder-based pharmaceutical processes. AIChE J. 62(6):1846–1862. doi:10.1002/aic.15210.
   Web of Science ®Google Scholar
• Ihalainen P, Määttänen A, Sandler N. 2015. Printing technologies for biomolecule and cell-based applications. Int J Pharm. 494(2):585–592. doi:10.1016/j.ijpharm.2015.02.033.
   PubMedGoogle Scholar
• Jamrógiewicz M, Pieńkowska K. 2019. Recent breakthroughs in the stability testing of pharmaceutical compounds. TrAC Trends Anal Chem. 111:118–127. doi:10.1016/j.trac.2018.12.007.
   Web of Science ®Google Scholar
• Jang D, Kim D, Moon J. 2009. Influence of Fluid Physical Properties on Ink-Jet Printability. Langmuir. 25(5):2629–2635. doi:10.1021/la900059m.
   PubMed Web of Science ®Google Scholar
• Janssen EM, Schliephacke R, Breitenbach A, Breitkreutz J. 2013. Drug-printing by flexographic printing technology–a new manufacturing process for orodispersible films. Int J Pharm. 441(1-2):818–825. doi:10.1016/j.ijpharm.2012.12.023.
   PubMed Web of Science ®Google Scholar
• Jayaprakash P, Maudhuit A, Gaiani C, Desobry S. 2023. Encapsulation of bioactive compounds using competitive emerging techniques: electrospraying, nano spray drying, and electrostatic spray drying. J Food Eng. 339:111260. doi:10.1016/j.jfoodeng.2022.111260.
   Web of Science ®Google Scholar
• Katakam P, Dey B, Assaleh FH, Hwisa NT, Adiki SK, Chandu BR, Mitra A. 2015. Top-Down and Bottom-Up Approaches in 3D Printing Technologies for Drug Delivery Challenges. Crit Rev Ther Drug Carrier Syst. 32(1):61–87. doi:10.1615/critrevtherdrugcarriersyst.2014011157.
   PubMed Web of Science ®Google Scholar
• Khan KU, Minhas MU, Badshah SF, Suhail M, Ahmad A, Ijaz S. 2022. Overview of nanoparticulate strategies for solubility enhancement of poorly soluble drugs. Life Sci. 291:120301. doi:10.1016/j.lfs.2022.120301.
   PubMed Web of Science ®Google Scholar
• Kipphan H. 2001. Handbook Of Print media: technologies and Production Methods. Illus Ed Springer N Y City N Y. [accessed 2023 Apr 5]. https://www.academia.edu/8722974/Handbook_Of_Print_media.
   Google Scholar
• Kleinebudde P, Khinast J, Rantanen J. 2017. Continuous Manufacturing of Pharmaceuticals. Hoboken, NJ: John Wiley & Sons.
   Google Scholar
• Ko H-Y, Park J, Shin H, Moon J. 2004. Rapid Self-Assembly of Monodisperse Colloidal Spheres in an Ink-Jet Printed Droplet. Chem Mater. 16(22):4212–4215. doi:10.1021/cm035256t.
   Web of Science ®Google Scholar
• Kolakovic R, Viitala T, Ihalainen P, Genina N, Peltonen J, Sandler N. 2013. Printing technologies in fabrication of drug delivery systems. Expert Opin Drug Deliv. 10(12):1711–1723. doi:10.1517/17425247.2013.859134.
   PubMed Web of Science ®Google Scholar
• Krainer S, Smit C, Hirn U. 2019. The effect of viscosity and surface tension on inkjet printed picoliter dots. RSC Adv. 9(54):31708–31719. doi:10.1039/C9RA04993B.
   PubMed Web of Science ®Google Scholar
• Kumar V, Kaur H, Kumari A, Hooda G, Garg V, Dureja H. 2023. Drug delivery and testing via 3D printing. Bioprinting. 36:e00298. doi:10.1016/j.bprint.2023.e00298.
   Google Scholar
• Lee HM, Lee JS. 2022. Effects of heat transfer on particle suspended Drop-on-Demand inkjet printing using lattice Boltzmann method. Appl Therm Eng. 213:118637. doi:10.1016/j.applthermaleng.2022.118637.
   Web of Science ®Google Scholar
• Leung DH. 2022. Development of Nanosuspension Formulations Compatible with Inkjet Printing for the Convenient and Precise Dispensing of Poorly Soluble Drugs. Pharmaceutics. 14(2):449. doi:10.3390/pharmaceutics14020449.
   PubMed Web of Science ®Google Scholar
• Lin J-L, Kao Z-K, Liao Y-C. 2013. Preserving precision of inkjet-printed features with solvents of different volatilities. Langmuir. 29(36):11330–11336. doi:10.1021/la402461c.
   PubMed Web of Science ®Google Scholar
• Lind J, Kälvemark Sporrong S, Kaae S, Rantanen J, Genina N. 2017. Social aspects in additive manufacturing of pharmaceutical products. Expert Opin Drug Deliv. 14(8):927–936. doi:10.1080/17425247.2017.1266336.
   PubMed Web of Science ®Google Scholar
• Liu P, Rong X, Laru J, van Veen B, Kiesvaara J, Hirvonen J, Laaksonen T, Peltonen L. 2011. Nanosuspensions of poorly soluble drugs: preparation and development by wet milling. Int J Pharm. 411(1-2):215–222. doi:10.1016/j.ijpharm.2011.03.050.
   PubMed Web of Science ®Google Scholar
• Liu Q, Zou J, Chen Z, He W, Wu W. 2023. Current research trends of nanomedicines. Acta Pharm Sin B. accessed 2023 Aug 24 doi:10.1016/j.apsb.2023.05.018.
   Web of Science ®Google Scholar
• Liu Y, Derby B. 2019. Experimental study of the parameters for stable drop-on-demand inkjet performance. Phys Fluids. 31(3):032004. doi:10.1063/1.5085868.
   Web of Science ®Google Scholar
• López-Iglesias C, Casielles AM, Altay A, Bettini R, Alvarez-Lorenzo C, García-González CA. 2019. From the printer to the lungs: inkjet-printed aerogel particles for pulmonary delivery. Chem Eng J. 357:559–566. doi:10.1016/j.cej.2018.09.159.
   Web of Science ®Google Scholar
• Matsunami K, Nagato T, Hasegawa K, Sugiyama H. 2019. A large-scale experimental comparison of batch and continuous technologies in pharmaceutical tablet manufacturing using ethenzamide. Int J Pharm. 559:210–219. doi:10.1016/j.ijpharm.2019.01.028.
   PubMedGoogle Scholar
• Meléndez PA, Kane KM, Ashvar CS, Albrecht M, Smith PA. 2008. Thermal inkjet application in the preparation of oral dosage forms: dispensing of prednisolone solutions and polymorphic characterization by solid-state spectroscopic techniques. J Pharm Sci. 97(7):2619–2636. doi:10.1002/jps.21189.
   PubMed Web of Science ®Google Scholar
• Menditto E, Orlando V, De Rosa G, Minghetti P, Musazzi UM, Cahir C, Kurczewska-Michalak M, Kardas P, Costa E, Sousa Lobo JM, et al. 2020. Patient Centric Pharmaceutical Drug Product Design-The Impact on Medication Adherence. Pharmaceutics. 12(1):44. doi:10.3390/pharmaceutics12010044.
   PubMed Web of Science ®Google Scholar
• Merisko-Liversidge EM, Liversidge GG. 2008. Drug nanoparticles: formulating poorly water-soluble compounds. Toxicol Pathol. 36(1):43–48. doi:10.1177/0192623307310946.
   PubMed Web of Science ®Google Scholar
• Meyer UA. 2004. Pharmacogenetics – five decades of therapeutic lessons from genetic diversity. Nat Rev Genet. 5(9):669–676. doi:10.1038/nrg1428.
   PubMed Web of Science ®Google Scholar
• Montenegro-Nicolini M, Miranda V, Morales JO. 2017. Inkjet Printing of Proteins: an Experimental Approach. Aaps J. 19(1):234–243. doi:10.1208/s12248-016-9997-8.
   PubMed Web of Science ®Google Scholar
• Montenegro-Nicolini M, Reyes PE, Jara MO, Vuddanda PR, Neira-Carrillo A, Butto N, Velaga S, Morales JO. 2018. The Effect of Inkjet Printing over Polymeric Films as Potential Buccal Biologics Delivery Systems. AAPS PharmSciTech. 19(8):3376–3387. doi:10.1208/s12249-018-1105-1.
   PubMed Web of Science ®Google Scholar
• Morales Montecinos JO, Montenegro Nicolini M, Campano Hantscheruk FA. 2017. Pharmaceutical Form for Oral Administration of a Highly Controlled and Stable Dose of Nanoparticles or Biomacromolecule Suspensions. [accessed 2023 Aug 31]. https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2017120689.
   Google Scholar
• Mueannoom W, Srisongphan A, Taylor KMG, Hauschild S, Gaisford S. 2012. Thermal ink-jet spray freeze-drying for preparation of excipient-free salbutamol sulphate for inhalation. Eur J Pharm Biopharm. 80(1):149–155. doi:10.1016/j.ejpb.2011.09.016.
   PubMed Web of Science ®Google Scholar
• Musazzi UM, Khalid GM, Selmin F, Minghetti P, Cilurzo F. 2020. Trends in the production methods of orodispersible films. Int J Pharm. 576:118963. doi:10.1016/j.ijpharm.2019.118963.
   PubMed Web of Science ®Google Scholar
• Nallan HC, Sadie JA, Kitsomboonloha R, Volkman SK, Subramanian V. 2014. Systematic Design of Jettable Nanoparticle-Based Inkjet Inks: rheology, Acoustics, and Jettability. Langmuir. 30(44):13470–13477. doi:10.1021/la502903y.
   PubMed Web of Science ®Google Scholar
• Norman J, Madurawe RD, Moore CMV, Khan MA, Khairuzzaman A. 2017. A new chapter in pharmaceutical manufacturing: 3D-printed drug products. Adv Drug Deliv Rev. 108:39–50. doi:10.1016/j.addr.2016.03.001.
   PubMed Web of Science ®Google Scholar
• Öblom H, Sjöholm E, Rautamo M, Sandler N. 2019. Towards Printed Pediatric Medicines in Hospital Pharmacies: comparison of 2D and 3D-Printed Orodispersible Warfarin Films with Conventional Oral Powders in Unit Dose Sachets. Pharmaceutics. 11(7):334. doi:10.3390/pharmaceutics11070334.
   PubMed Web of Science ®Google Scholar
• O’Connor TF, Yu LX, Lee SL. 2016. Emerging technology: a key enabler for modernizing pharmaceutical manufacturing and advancing product quality. Int J Pharm. 509(1-2):492–498. doi:10.1016/j.ijpharm.2016.05.058.
   PubMedGoogle Scholar
• Ordoubadi M, Wang H, Vehring R. 2023. Mechanistic Formulation Design of Spray-Dried Powders. KONA. 40(0):149–171. doi:10.14356/kona.2023012.
   Google Scholar
• Palo M, Kolakovic R, Laaksonen T, Määttänen A, Genina N, Salonen J, Peltonen J, Sandler N. 2015. Fabrication of drug-loaded edible carrier substrates from nanosuspensions by flexographic printing. Int J Pharm. 494(2):603–610. doi:10.1016/j.ijpharm.2015.01.027.
   PubMedGoogle Scholar
• Pandey M, Choudhury H, Fern JLC, Kee ATK, Kou J, Jing JLJ, Her HC, Yong HS, Ming HC, Bhattamisra SK, et al. 2020. 3D printing for oral drug delivery: a new tool to customize drug delivery. Drug Deliv Transl Res. 10(4):986–1001. doi:10.1007/s13346-020-00737-0.
   PubMed Web of Science ®Google Scholar
• Pardeike J, Strohmeier DM, Schrödl N, Voura C, Gruber M, Khinast JG, Zimmer A. 2011. Nanosuspensions as advanced printing ink for accurate dosing of poorly soluble drugs in personalized medicines. Int J Pharm. 420(1):93–100. doi:10.1016/j.ijpharm.2011.08.033.
   PubMed Web of Science ®Google Scholar
• Park J, Moon J. 2006. Control of Colloidal Particle Deposit Patterns within Picoliter Droplets Ejected by Ink-Jet Printing. Langmuir. 22(8):3506–3513. doi:10.1021/la053450j.
   PubMed Web of Science ®Google Scholar
• Patil A, Patil P, Pardeshi S, Shrimal P, Rebello N, Mohite PB, Chatterjee A, Mujumdar A, Naik J. 2023. Combined microfluidics and drying processes for the continuous production of micro-/nanoparticles for drug delivery: a review. Dry Technol. 41(10):1533–1568. doi:10.1080/07373937.2023.2167827.
   Web of Science ®Google Scholar
• Planchette C, Pichler H, Wimmer-Teubenbacher M, Gruber M, Gruber-Woelfler H, Mohr S, Tetyczka C, Hsiao W-K, Paudel A, Roblegg E, et al. 2016. Printing medicines as orodispersible dosage forms: effect of substrate on the printed micro-structure. Int J Pharm. 509(1-2):518–527. doi:10.1016/j.ijpharm.2015.10.054.
   PubMed Web of Science ®Google Scholar
• Pramanik J, Brahma B, Pradhan S, Ranjan Senapati M, Kumar Samal A, Kumar Pani S. 2023. accessed 2023. Aug 24]. 3D printing application in biomedical - a review. Mater Today Proc. doi:10.1016/j.matpr.2023.07.046.
   Google Scholar
• Rafiq M, Khan RS, Rather AH, Wani TU, Qureashi A, Pandith AH, Rather S, Sheikh FA. 2022. Overview of printable nanoparticles through inkjet process: their application towards medical use. Microelectron Eng. 266:111889. doi:10.1016/j.mee.2022.111889.
   Web of Science ®Google Scholar
• Raijada D, Genina N, Fors D, Wisaeus E, Peltonen J, Rantanen J, Sandler N. 2013. A step toward development of printable dosage forms for poorly soluble drugs. J Pharm Sci. 102(10):3694–3704. doi:10.1002/jps.23678.
   PubMed Web of Science ®Google Scholar
• Raijada D, Genina N, Fors D, Wisaeus E, Peltonen J, Rantanen J, Sandler N. 2014. Designing Printable Medicinal Products: solvent System and Carrier-Substrate Screening. Chem Eng & Technol. 37(8):1291–1296. doi:10.1002/ceat.201400209.
   Web of Science ®Google Scholar
• Raijada D, Wac K, Greisen E, Rantanen J, Genina N. 2021. Integration of personalized drug delivery systems into digital health. Adv Drug Deliv Rev. 176:113857. doi:10.1016/j.addr.2021.113857.
   PubMed Web of Science ®Google Scholar
• Rantanen J, Khinast J. 2015. The Future of Pharmaceutical Manufacturing Sciences. J Pharm Sci. 104(11):3612–3638. doi:10.1002/jps.24594.
   PubMed Web of Science ®Google Scholar
• Ruiz-Cantu L, F Trindade G, Taresco V, Zhou Z, He Y, Burroughs L, Clark EA, Rose FRAJ, Tuck C, Hague R, et al. 2021. Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers. ACS Appl Mater Interfaces. 13(33):38969–38978., doi:10.1021/acsami.1c07850.
   PubMed Web of Science ®Google Scholar
• Saldanha PL, Lesnyak V, Manna L. 2017. Large scale syntheses of colloidal nanomaterials. Nano Today. 12:46–63. doi:10.1016/j.nantod.2016.12.001.
   Web of Science ®Google Scholar
• Samiei N. 2020. Recent trends on applications of 3D printing technology on the design and manufacture of pharmaceutical oral formulation: a mini review. Beni-Suef Univ J Basic Appl Sci. 9(1):12. doi:10.1186/s43088-020-00040-4.
   Google Scholar
• Sandler N, Määttänen A, Ihalainen P, Kronberg L, Meierjohann A, Viitala T, Peltonen J. 2011. Inkjet printing of drug substances and use of porous substrates‐towards individualized dosing. J Pharm Sci. 100(8):3386–3395. doi:10.1002/jps.22526.
   PubMed Web of Science ®Google Scholar
• Sandler N, Preis M. 2017. Printed Drug-Delivery Systems for Improved Patient Treatment: (Trends in Pharmacological Sciences 37, 1070-1080). Trends Pharmacol Sci. 38(3):317. doi:10.1016/j.tips.2017.01.002.
   PubMed Web of Science ®Google Scholar
• Scoutaris N, Alexander MR, Gellert PR, Roberts CJ. 2011. Inkjet printing as a novel medicine formulation technique. J Control Release. 156(2):179–185. doi:10.1016/j.jconrel.2011.07.033.
   PubMed Web of Science ®Google Scholar
• Sen K, Manchanda A, Mehta T, Ma AWK, Chaudhuri B. 2020. Formulation design for inkjet-based 3D printed tablets. Int J Pharm. 584:119430. doi:10.1016/j.ijpharm.2020.119430.
   PubMedGoogle Scholar
• Shaikeea A, Basu S, Hatte S, Bansal L. 2016. Insights into Vapor-Mediated Interactions in a Nanocolloidal Droplet System: evaporation Dynamics and Affects on Self-Assembly Topologies on Macro- to Microscales. Langmuir. 32(40):10334–10343. doi:10.1021/acs.langmuir.6b03024.
   PubMed Web of Science ®Google Scholar
• Sharma G, Mueannoom W, Buanz ABM, Taylor KMG, Gaisford S. 2013. In vitro characterisation of terbutaline sulphate particles prepared by thermal ink-jet spray freeze drying. Int J Pharm. 447(1-2):165–170. doi:10.1016/j.ijpharm.2013.02.045.
   PubMed Web of Science ®Google Scholar
• Shore HJ, Harrison GM. 2005. The effect of added polymers on the formation of drops ejected from a nozzle. Phys Fluids. 17(3):033104. doi:10.1063/1.1850431.
   Web of Science ®Google Scholar
• Soleimani-Gorgani A. 2016. 14 - Inkjet Printing. In: izdebska J, Thomas S, editors. Print Polym. Norwich, NY: William Andrew Publishing; [accessed 2022 Jan 3p. 231–246. doi:10.1016/B978-0-323-37468-2.00014-2.
   Google Scholar
• Stegemann S, Baeyens J-P, Becker R, Maio M, Bresciani M, Shreeves T, Azadi C, Ecker F, Gogol M. 2014. Design of pharmaceutical products to meet future patient needs requires modification of current development paradigms and business models. Z Gerontol Geriatr. 47(4):285–287. doi:10.1007/s00391-014-0647-4.
   PubMed Web of Science ®Google Scholar
• Stranzinger S, Wolfgang M, Klotz E, Scheibelhofer O, Ghiotti P, Khinast JG, Hsiao W-K, Paudel A. 2021. Near-Infrared Hyperspectral Imaging as a Monitoring Tool for On-Demand Manufacturing of Inkjet-Printed Formulations. AAPS PharmSciTech. 22(6):211. doi:10.1208/s12249-021-02091-x.
   PubMed Web of Science ®Google Scholar
• Sun J, Wei X, Huang B. 2012. Influence of the viscosity of edible ink to piezoelectric ink-jet printing drop state. AMM. 200:676–680. doi:10.4028/www.scientific.net/AMM.200.676.
   Google Scholar
• Tai J, Gan HY, Liang YN, Lok BK. 2008. Control of Droplet Formation in Inkjet Printing Using Ohnesorge Number Category: materials and Processes. In 2008 10th Electron Packag Technol Conf. p. 761–766. doi:10.1109/EPTC.2008.4763524.
   Google Scholar
• Tarkkala H, Helén I, Snell K. 2019. From health to wealth: the future of personalized medicine in the making. Futures. 109:142–152. doi:10.1016/j.futures.2018.06.004.
   Web of Science ®Google Scholar
• Thabet Y, Klingmann V, Breitkreutz J. 2018. Drug Formulations: standards and Novel Strategies for Drug Administration in Pediatrics. J Clin Pharmacol. 58 Suppl 10(S10):S26–S35. doi:10.1002/jcph.1138.
   PubMedGoogle Scholar
• Thabet Y, Lunter D, Breitkreutz J. 2018. Continuous inkjet printing of enalapril maleate onto orodispersible film formulations. Int J Pharm. 546(1-2):180–187. doi:10.1016/j.ijpharm.2018.04.064.
   PubMedGoogle Scholar
• Tofail SAM, Koumoulos EP, Bandyopadhyay A, Bose S, O’Donoghue L, Charitidis C. 2018. Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Mater Today. 21(1):22–37. doi:10.1016/j.mattod.2017.07.001.
   Web of Science ®Google Scholar
• Trenfield SJ, Xian Tan H, Awad A, Buanz A, Gaisford S, Basit AW, Goyanes A. 2019. Track-and-trace: novel anti-counterfeit measures for 3D printed personalized drug products using smart material inks. Int J Pharm. 567:118443. doi:10.1016/j.ijpharm.2019.06.034.
   PubMed Web of Science ®Google Scholar
• Trivedi M, Jee J, Silva S, Blomgren C, Pontinha VM, Dixon DL, Van Tassel B, Bortner MJ, Williams C, Gilmer E, et al. 2018. Additive manufacturing of pharmaceuticals for precision medicine applications: a review of the promises and perils in implementation. Addit Manuf. 23:319–328.,. doi:10.1016/j.addma.2018.07.004.
   Web of Science ®Google Scholar
• Ullah M, Wahab A, Khan SU, Naeem M, Ur Rehman K, Ali H, Ullah A, Khan A, Khan NR, Rizg WY, et al. 2023. 3D printing technology: a new approach for the fabrication of personalized and customized pharmaceuticals. Eur Polym J. 195:112240. doi:10.1016/j.eurpolymj.2023.112240.
   Web of Science ®Google Scholar
• Vakili H, Wickström H, Desai D, Preis M, Sandler N. 2017. Application of a handheld NIR spectrometer in prediction of drug content in inkjet printed orodispersible formulations containing prednisolone and levothyroxine. Int J Pharm. 524(1-2):414–423. doi:10.1016/j.ijpharm.2017.04.014.
   PubMed Web of Science ®Google Scholar
• Varan C, Wickström H, Sandler N, Aktaş Y, Bilensoy E. 2017. Inkjet printing of antiviral PCL nanoparticles and anticancer cyclodextrin inclusion complexes on bioadhesive film for cervical administration. Int J Pharm. 531(2):701–713. doi:10.1016/j.ijpharm.2017.04.036.
   PubMed Web of Science ®Google Scholar
• Wang D, Cheng P. 2021. Nanoparticles deposition patterns in evaporating nanofluid droplets on smooth heated hydrophilic substrates: a 2D immersed boundary-lattice Boltzmann simulation. Int J Heat Mass Transf. 168:120868. doi:10.1016/j.ijheatmasstransfer.2020.120868.
   Web of Science ®Google Scholar
• Wickström H, Hilgert E, Nyman JO, Desai D, Şen Karaman D, de Beer T, Sandler N, Rosenholm JM. 2017. Inkjet Printing of Drug-Loaded Mesoporous Silica Nanoparticles-A Platform for Drug Development. Molecules. 22(11):1–20. doi:10.3390/molecules22112020.
   Web of Science ®Google Scholar
• Wickström H, Nyman JO, Indola M, Sundelin H, Kronberg L, Preis M, Rantanen J, Sandler N. 2017. Colorimetry as Quality Control Tool for Individual Inkjet-Printed Pediatric Formulations. AAPS PharmSciTech. 18(2):293–302. doi:10.1208/s12249-016-0620-1.
   PubMed Web of Science ®Google Scholar
• Wickström H, Palo M, Rijckaert K, Kolakovic R, Nyman JO, Määttänen A, Ihalainen P, Peltonen J, Genina N, de Beer T, et al. 2015. Improvement of dissolution rate of indomethacin by inkjet printing. Eur J Pharm Sci. 75:91–100. doi:10.1016/j.ejps.2015.03.009.
   PubMed Web of Science ®Google Scholar
• Wilson MW. 2016. Manufacturing Platforms for Patient-Centric Drug Products. In: stegemann S, editor. Dev Drug Prod Aging Soc Concept Prescr. Cham: springer International Publishing; [accessed 2023 Mar 27]; p. 447–483. doi:10.1007/978-3-319-43099-7_22.
   Google Scholar
• Wilson MW, Martini L, Clarke A. 2016. Novel Manufacturing Technologies for the Production of Patient-Centric Drug Products. In: stegemann S, editor. Dev Drug Prod Aging Soc Concept Prescr. Cham: springer International Publishing; [accessed 2023 Mar 27]; p. 485–515. doi:10.1007/978-3-319-43099-7_23.
   Google Scholar
• Xu Q, Basaran O. 2007. Computational analysis of drop-on-demand drop formation. Phys Fluids - PHYS FLUIDS. 19(10):102111. doi:10.1063/1.2800784.
   Google Scholar
• Xu T, Rohozinski J, Zhao W, Moorefield EC, Atala A, Yoo JJ. 2009. Inkjet-mediated gene transfection into living cells combined with targeted delivery. Tissue Eng Part A. 15(1):95–101. doi:10.1089/ten.tea.2008.0095.
   PubMed Web of Science ®Google Scholar
• Yang S, Leong K-F, Du Z, Chua C-K. 2002. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng. 8(1):1–11. doi:10.1089/107632702753503009.
   PubMedGoogle Scholar
• You M, Lin M, Wang S, Wang X, Zhang G, Hong Y, Dong Y, Jin G, Xu F. 2016. Three-dimensional quick response code based on inkjet printing of upconversion fluorescent nanoparticles for drug anti-counterfeiting. Nanoscale. 8(19):10096–10104. doi:10.1039/c6nr01353h.
   PubMed Web of Science ®Google Scholar
• Zhang C, Zhang H, Zhao Y, Yang C. 2021. An immersed boundary-lattice Boltzmann model for simulation of deposited particle patterns in an evaporating sessile droplet with dispersed particles. Int J Heat Mass Transf. 181:121905. doi:10.1016/j.ijheatmasstransfer.2021.121905.
   Web of Science ®Google Scholar
• Zhang D, Rumondor ACF, Zhu W, Colace T, Marota M, Mora J, Liu Z, Li Y. 2020. The Development of Minitablets for a Pediatric Dosage Form for a Combination Therapy. J Pharm Sci. 109(12):3590–3597. doi:10.1016/j.xphs.2020.08.021.
   PubMed Web of Science ®Google Scholar
• Zhang J, Vo AQ, Feng X, Bandari S, Repka MA. 2018. Pharmaceutical Additive Manufacturing: a Novel Tool for Complex and Personalized Drug Delivery Systems. AAPS PharmSciTech. 19(8):3388–3402. doi:10.1208/s12249-018-1097-x.
   PubMed Web of Science ®Google Scholar
• Zhang K, Vora A, Abramson I, Azari S. 2022. High refractive index overcoat formulation and method of use with inkjet printing. [accessed 2023 Aug 31]. https://patents.google.com/patent/US20220204790A1/en?q=(inkjet+AND+nanoparticles)&oq=inkjet+AND+nanoparticles.
   Google Scholar
• Zimmermann R, Leal BBJ, Braghirolli DI, Pranke P. 2023. Production of nanostructured systems: main and innovative techniques. Drug Discov Today. 28(2):103454. doi:10.1016/j.drudis.2022.103454.
   PubMed Web of Science ®Google Scholar