REFERENCES
- Samani S.M., Montaseri H., Kazemi A. The effect of polymer blends on release profiles of diclofenac sodium from matrices. Eur. J. Pharm. Biopharm. 2003; 55: 351–355
- Lecomte F., Siepmann J., Walther M., MacRae R., Bodmeier R. pH-Sensitive polymer blends used as coating materials to control drug release from spherical beads: elucidation of the underlying mass transport mechanisms. Pharm. Res. 2005; 22: 1129–1141
- Nerurkar J., Jun H.W., Price J.C., Park M.O. Controlled-release matrix tablets of ibuprofen using cellulose ethers and carrageenans, effect of formulation factors on dissolution rates. Eur. J. Pharm. Biopharm. 2005; 61: 56–68
- Vega-González A., Domingo C., Elvira C., Subra P. Precipitation of PMMA/PCL blend using supercritical carbon dioxide. J. Appl. Pol. Sci. 2004; 91: 2422–2426
- Kim B.K., Hwang S.J., Park J.B., Park H.J. Characteristics of felodipine-located polyε-caprolactone microspheres. J. Microencapsul. 2005; 22: 193–203
- Barbato F., Rotonda M.I., Maglio G., Palumo R., Quaglia F. Biodegradable microspheres of a novel segmented polyether-ester-amides based on polye-caprolactone for the delivery of bioactive compounds. Biomaterials 2001; 22: 1371–1378
- Sinha V.R., Bansal K., Kaushik R., Kumria R., Trehan A. Poly-ε-caprolactone microspheres and nanospheres: an overview. Int. J. Pharm. 2004; 278: 1–23
- Chandy T., Wilson R.F., Rao G.H.R., Das G.S. Changes in cisplatin delivery due to surface-coated poly lactic acid-polyepsilon-caprolactone microspheres. J. Biomat. Appl. 2002; 16: 275–291
- Wang J., Cheung M.K., Mi Y. Miscibility and morphology in crystalline/amorphous blends of polycaprolactone/poly4-vinylphenol as studied by DSC, FTIR, and 13C solid state NMR. Polymer 2002; 43: 1357–1364
- Santos C.A., Freedman B.D., Ghosn S., Jacob J.S., Scarpulla M., Mathiowitz E. Evaluation of anhydride oligomers within polymer microsphere blends and their impact on bioadhesion and drug delivery in vitro. Biomaterials 2003; 24: 3571–3583
- Gibaud S., Al Awwadi N.J., Ducki C., Astier A. Polyε-caprolactone and Eudragit® microparticles containing fludrocortisone acetate. Int. J. Pharm. 2004; 269: 491–508
- Ashford M., Fell J.T., Attwood D., Woodhead P.J. An in vitro investigation into the suitability of pH-dependent polymers for colonic targeting. Int. J. Pharm. 1993; 91: 241–245
- Beten DB, Gelbcke M., Diallo B., Moës A.J. Interaction between dipyridamole and Eudragit S. Int. J. Pharm. 1992; 88: 31–37
- Zhu K.J., Zhang J.X., Wang C., Yasuda H., Ichimaru A., Yamamoto H. Preparation and in vitro release behaviour of 5-fluorouracil-loaded microspheres based on poly L-lactide and its carbonate copolymers. J. Microencapsul. 2003; 20: 731–743
- Matsumoto A., Matsukawa Y., Suzuki T., Yoshino H. Drug release characteristics of multi-reservoir type microspheres with polyDL-lactide-co-glycolide and polyDL-lactide. J. Control. Release. 2005; 106: 172–180
- Alavi A.K., Squillante E., Mehta K.A. Formulation of enterosolubile microparticles for an acid labile protein. J. Pharm. Pharm. Sci. 2002; 5: 234–244
- Mateovic T., Ratnik M., Bogataj M., Mrhar A. Determination of microsphere solidification time in the solvent evaporation process. J. Microencapsul. 2005; 22: 81–90
- Obeidat W.M., Price J.C. Preparation and in vitro evaluation of propylthiouracil microspheres made of Eudragit RL 100 and cellulose acetate butyrate polymers using the emulsion-solvent evaporation method. J. Microencapsul. 2005; 22: 281–289
- Yang J.F., Qiu L.Y., Jin Y., Zhang J.X. Thymosin-loaded enteric microspheres for oral administration: Preparation and in vitro release studies. Int. J. Pharm. 2005; 301: 41–47
- Raffin R.P., Colomé L.M., Pohlmann A.R., Guterres S.S. Preparation, characterization, and in vivo anti-ulcer evaluation of pantoprazole-loaded microparticles. Eur. J. Pharm. Biopharm. 2006; 63: 198–204
- O'Donnell P., McGinity J. Preparation of microspheres by the solvent evaporation technique. Adv. Drug Del. Rev. 1997; 28: 25–42
- Lamprecht A., Yamamoto H., Takeuchi H., Kawashima Y. Design of pH-sensitive microspheres for the colonic delivery of the immunosuppressive drug tacrolimus. Eur. J. Pharm. Biopharm. 2004; 58: 37–43
- Lee T.H., Wang J., Wang C. Double-walled microspheres for the sustained release of a highly water soluble drug: characterization and irradiation studies. J. Control. Release. 2002; 83: 437–452
- Rahman N.A., Mathiowitz E. Localization of bovine serum albumin in double-walled microspheres. J. Control. Release 2004; 94: 163–175
- Tan E.C., Lin R., Wang C. Fabrication of double-walled microspheres for the sustained release of doxorubicin. J. Coll. Int. Sci. 2005; 291: 135–143
- Giunchedi P., Gavini E., Bonacucina G., Palmieri G.F. Tabletted polylactide microspheres prepared by a w/o emulsion-spray drying method. J. Microencapsul. 2000; 17: 711–720
- Palmieri G., Michelini S., Martino P., Martelli S. Polymers with pH-dependent solubility: possibility of use in the formulation of gastroresistant and controlled-release matrix tablets. Drug Dev. Ind. Pharm. 2000; 26: 837–845
- Jungnickel P.W. Pantoprazole, a new proton pump inhibitor. Clin. Ther. 2000; 22: 1268–1293
- Sachs G., Shin J.M., Pratha V., Hogan D. Synthesis or rupture, duration of acid inhibition by proton pump inhibitors. Drugs Today 2003; 39(Suppl. A)11–14
- Shin J., Besancon M., Simon A., Sachs G. The site of action of pantoprazole in the gastric H+/K+-ATPase. Biochim. Biophys. Acta 1993; 1148: 223–233
- Cuña M., Vila Jato J.L., Torres D. Controlled-release liquid suspensions based on ion-exchange particles entrapped within acrylic microcapsules. Int. J. Pharm. 2000; 199: 151–158
- Guidance for Industry–Q2B Validation of Analytical Procedures, Methodology. European Agency for the Evaluation of Medicinal Products (ICH), Londres 1996
- Raffin R.P., Colomé L.M., Guterres S.S., Pohlmann A.R. Validation of analytical methodology by hplc for quantification and stability evaluation of sodium pantoprazole. Quimica Nova 2007; 30: 1001–1005
- Brunauer S., Emmet P.H., Teller E. Adsorption of gases in multimolecular layers. J. Am. Chem. Soc. 1938; 60: 309–319
- Barret E.P., Joyner L.G., Halenda P.P. The determination of pore volume and area distributions in porous substances. I. Computations from nitrogen isotherms. J. Am. Chem. Soc. 1951; 73: 373–380
- United States Pharmacopeia30th. United States Pharmacopeial Convention, Rockville, MD 2007
- Zupancic V., Ograjsek N., Kotar-Jordan B., Vrecer F. Physical characterization of pantoprazole sodium hydrates. Int. J. Pharm. 2005; 291: 59–68
- Yip E.Y., Wang J., Wang C. Sustained release system for highly water-soluble radiosensitizer drug etanidazole: irradiation and degradation studies. Biomaterials 2003; 24: 1977–1987
- Palmieri G.F., Bonacucina G., Di Martino P., Martelli S. Spray-drying as a method for microparticulate controlled release systems; Preparation: Advantages and limits. I. Water-soluble drugs. Drug Dev. Ind. Pharm. 2001; 27: 195–204