REFERENCES
- S Rambhatla, and MJ Pikal. (2003). Heat and mass transfer scale-up issues during freeze-drying I: Atypical radiation and the edge vial effect. AAPS Pharm. Sci. Tech. 4 (2):111–120.
- S Rambhatla, S Tchessalov, and MJ Pikal. (2006). Heat and mass transfer scale-up issues during freeze-drying, III: Control and characterization of dryer differences via operational qualification tests. AAPS Pharm. Sci. Tech. 7 (2): Article 39.
- C Roth, G Winter, and G Lee. (2001). Continuous measurement of drying rate of crystalline and amorphous systems during freeze-drying using an in situ microbalance technique. J. Pharm. Sci. 90 (9):1345–1355.
- H Gieseler, and G Lee. (2008). Effects of vial packing density on momentary drying rate during freeze-drying of carbohydrates or a model protein measured using a microbalance technique. Pharm. Res. 25 (2):302–312.
- X Tang, and MJ Pikal. (2004). Design of freeze-drying processes for pharmaceuticals: practical advice. Pharm. Res. 21 (2):191–200.
- X Tang, SL Nail, and MJ Pikal. (2005). Freeze-drying process design by manometric temperature measurement: design of a smart freeze-dryer. Pharm. Res. 22 (4):685–700.
- VL Hill, DQM Craig, and LC Feely. (1999). The effects of experimental parameters and calibration on MTDSC data. Int. J. Pharm. 21–32.
- J Placek. Heat transfer limitations, their reduction and controlProceed. Freeze-Drying Pharm Biologic, Breckenridge, (2001) .
- MJ Pikal, and S Shah. (1990). The collapse temperature in freeze-drying: dependence on measurement methodology and rate of water removal from the glassy phase. Int. J. Pharmaceut. 62:165–186.
- BC Hancock, and G Zografi. (1994). The relationship between the glass transition temperature and the water content of amorphous pharmaceutical solids. Pharm. Res. 11 (4):471–477.
- W Wang. (2000). Lyophilization and development of solid protein pharmaceuticals. Int. J. Pharmaceut. 203:1–60.
- C Biliaderis, R Swan, and I Arvanitoyannis. (1999). Physiochemical properties of commercial starch hydrolyzates in the frozen state. Food Chem. 64 (4):537–546.
- MJ Pikal. (1985). Use of laboratory data in freeze-drying process design: heat and mass transfer coefficients and the computer simulation of freeze-drying. J. Parent. Sci. Technol. 39 (3):115–138.
- MJ Pikal. Freeze-dryingEncyclopedia of Pharmaceutical Technology. Marcel Dekker, New York, (2002) 1299–1326.
- W Kuu, L Hardwick, and M Ackes. (2006). Rapid determination of dry layer mass transfer resistance for various pharmaceutical formulations during primary drying using product temperature profiles. Int. J. Pharm. 313:99–113.
- S Rambhatla, and MJ Pikal. (2003). Heat and mass transfer scale-up issues during freeze-drying I: Atypical radiation and the edge vial effect. AAPS Pharm. Sci. Tech. 4 (2):111–120.
- XC Tang, SL Nail, and MJ Pikal. (2006). Evaluation of manometric temperature measurement (MTM), a process analytical technology tool in freeze-drying, Part III: Heat and mass transfer measurement. AAPS Pharm. Sci. Tech. 7 (4): Article 97.
- S Schneid, H Gieseler, W Kessler, and MJ Pikal. The determination of position dependent vial heat transfer coefficient: A comparision of tunable diode laser absorption spectroscopy and gravimetric measurementsProc. CCPR Freeze-Drying of Pharmaceuticals and BiologicalsGarmisch-Patenkirchen, Germany(2006).
- JA Searls. Heterogeneity phenomena in pharmaceutical lyophilization. University of Colorado, BoulderCO, (2000) PhD Thesis,.
- H Gieseler, WJ Kessler, M Finson, SJ Davis, PA Mulhall, V Bons, DJ Debo, and MJ Pikal. (2007). Evaluation of tunable diode laser absorption spectroscopy for in-process water vapor mass flux measurement during freeze drying. J. Pharm. Sci. 96 (7):1776–1793.