METHODOLOGY TO COMPARE 3-D AND 2-D PARAMETERS FOR THE OPTIMIZATION OF HARD TURNED SURFACES

REFERENCES

• Konig , W. , Klinger , M. , and Link , R. ( 1990 ). Machining Hard Materials with Geometrically Defined Cutting Edges – Field of Applications and Limitation . Annals of the College International pour la Recherche en Productique (CIRP) , 39 ( 1 ): 61 – 64 .
   Google Scholar
• Sheehy , T. ( 1997 ). Taking the Hard Out of Hard Turning . Manufacturing Engineering , March : 100 – 106 . [CSA]
   Web of Science ®Google Scholar
• Boggio , U. ( 1996 ). The Recipe for Good Hard Turning . Manufacturing Engineering , March : 95 – 106 . [CSA]
   Web of Science ®Google Scholar
• Fleming , M. , Sweeney , C. , Valentine , T. , and Simpkin , R. ( 1998 ). PCBN Hard Turning and Workpiece Surface Integrity . Industrial Diamond Review , 4 : 128 – 133 . [CSA]
   Google Scholar
• Abay , C. ( 2000 ). Hard Turning of Drive Components with PCBN . Industrial Diamond Review , 2 : 110 – 114 . [CSA]
   Google Scholar
• Knuefermann , M. , Read , R. , Nunn , R. , Clark , I. , and Fleming , M. ( 2001 ). 22 nm Ra Surface Finish Achieved with AMBORITE DBN45 in Ultra-Precision Turning of Hardened Steel . Industrial Diamond Review , 2 : 87 – 92 . [CSA]
   Google Scholar
• Davis , E.J. , Sullivan , P.J. , and Stout , K.J. ( 1988 ). The Application of 3-D Topography to Engine Bore Surfaces . Surface Topography , 1 ( 2 ): 229 – 251 . [CSA]
   Google Scholar
• Santochi , M. and Vignale , M. ( 1982 ). A Study on the Functional Properties of a Honed Surface . Annals of the College International pour la Recherche en Productique (CIRP) , 31 : 431 – 434 . [CSA]
   Google Scholar
• Santochi , M. and Tantussi , G. ( 1984 ). Surface Parametrical Microgeometry and Functional Models: A New Approach . Precision Engineering , 6 ( 4 ): 201 – 206 . [CSA] [CROSSREF]
   Google Scholar
• Griffiths , B.J. ( 1998 ). Manufacturing Surface Design and Monitoring for Performance . Surface Topography , 1 ( 1 ): 61 – 69 . [CSA]
   Google Scholar
• Chiffre , L. , Lornardo , P. , Trumpold , H. , and Lucca , D. ( 2000 ). Quantitative Characterization of Surface Texture . Annals of the College International pour la Recherche en Productique (CIRP) , 49 ( 2 ): 635 – 652 . [CSA]
   Google Scholar
• Peklenik , J. ( 1967 ). Investigation of Surface Typology . Annals of the College International pour la Recherche en Productique (CIRP) , 25 : 381 – 385 . [CSA]
   Google Scholar
• Whitehouse , D. and Vanherck , P. ( 1974 ). Assessment of Surface Typology Analysis Techniques in Turning . Annals of the College International pour la Recherche en Productique (CIRP) , 23 ( 2 ): 265 – 282 . [CSA]
   Google Scholar
• Burrows , J. and Griffiths , B. ( 1998 ). A Vector Modeling Technique for the Representation of 3-Dimensional Surface Topography . International Journal of Machining Tools and Manufacture , 38 ( 5–6 ): 537 – 542 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Zahouani , H. , Varigiolu , R. , and Loubet , J. ( 1998 ). Fractal Models of Surface Topography and Contact Mechanics . Mathematical and Computer Modelling , 28 ( 4–8 ): 517 – 534 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Chen , C. , Liu , W. , and Duffie , N. ( 1998 ). A Surface Topography Model for Automated Surface Finishing . International Journal of Machining Tools and Manufacture , 38 ( 5–6 ): 543 – 550 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Shaw , M. ( 1997 ). Metal Cutting Principles . Oxford Science Publications , New York .
   Google Scholar
• Zhang , G. and Kapoor , S. ( 1991 ). Dynamic Generation of Machined Surfaces Part 2: Construction of Surface Topography . Transactions of the ASME, Journal of Engineering for Industry , 113 : 149 – 153 . [CSA]
   Google Scholar
• Sata , T. ( 1963 ). Surface Finish in Metal Cutting . Annals of the College International pour la Recherche en Productique (CIRP) , 12 : 190 – 197 . [CSA]
   Google Scholar
• Munoz-Escalana , P. and Cassier , Z. ( 1998 ). Influence of Critical Cutting Speed on the Surface Finish of Turned Steel . Wear , 218 : 103 – 109 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Choudhary , I.A. and El-Baradie , M. ( 1997 ). Surface Roughness Prediction in the Turning of High Strength Steel by Factorial Design of Experiments . Journal of Materials Processing Technology , 67 : 55 – 61 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Thomas , M. , Beaucamp , Y. , Youssef , Y. , and Masounave , J. ( 1997 ). An Experimental Design for Surface Roughness and Built-Up Edge Formation in Lathe Dry Turning . International Journal of Quality Science , 2 ( 3 ): 167 – 180 . [CSA] [CROSSREF]
   Google Scholar
• Feng , C. ( 2001 ). An Experimental Study of the Impact of Turning Parameters on Surface Roughness ; Proceedings of the 2001 Industrial Engineering Research Conference 2036 .
   Google Scholar
• Abouelatta , O. and Madl , J. ( 2001 ). Surface Roughness Prediction Based on Cutting Parameters and Tool Vibrations in Turning Operations . Journal of Materials Processing Technology , 118 : 269 – 277 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Yang , W. and Tarng , Y. (1998). Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method. Journal of Materials Processing Technology , 84: 122–129. [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Grzseik , W. ( 1997 ). Experimental Investigation of the Influence of Adhesion on the Frictional Conditions in the Cutting Process . Tribology International , 32 : 15 – 23 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Grzseik , W. ( 1996 ). A Revised Model for Predicting Surface Roughness in Turning . Wear , 194 : 143 – 148 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Lin , S. and Chang , M. ( 1998 ). A Study of the Effects of Vibrations on Surface Finish using a Surface Topography Simulation Model for Turning . International Journal of Machining Tools and Manufacture , 38 : 763 – 782 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Kim , J. , Lee , E. , and Hyun , D. ( 1994 ). A Study of the Modeling of Tool Motion and High Accuracy Surface Generation by the use of Cutting Force Signal . Journal of Materials Processing Technology , 47 : 45 – 62 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Kelly , K. , Young , P. , and Byrne , G. ( 1999 ). Modeling the Influence of Machining Dynamics on Surface Topography in Turning . International Journal of Mechanical Science , 41 : 507 – 526 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Sczecsi , T. ( 1999 ). Cutting Force Modeling using Artificial Neural Networks . Journal of Materials Processing Technology , 92–93 : 344 – 349 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Lin , W. , Lee B. , and Wu , C. ( 2001 ). Modeling the Surface Roughness and Cutting Force in Turning . Journal of Materials Processing Technology , 108 : 286 – 293 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Jang , J. , Sun , C. , and Mizutani , E. ( 1997 ). Neuro-Fuzzy and Soft Computing: A Computational Approach to Learning and Machine Intelligence . Prentice Hall Inc. , Englewood-Cliffs , NJ .
   Google Scholar