UNDERSTANDING OF FINITE ELEMENT ANALYSIS RESULTS UNDER THE FRAMEWORK OF OXLEY'S MACHINING MODEL

REFERENCES

• Fenton , R.G. and Oxley , P.L.B. ( 1968–1969 ). Mechanics of Orthogonal Machining: Allowing for the Effects of Strain-Rate and Temperature on Tool-Chip Friction . Proceedings of the Institution of Mechanical Engineers , 183 : 417 – 438 . [CSA]
   Google Scholar
• Stevenson , M.G. and Oxley , P.L.B. ( 1969–1970 ). An Experimental Investigation of the Influence of Speed and Scale on the Strain-Rate in a Zone of Intense Plastic Deformation . Proceedings of the Institution of Mechanical Engineers , 184 ( 31 ): 561 – 576 . [CSA]
   Google Scholar
• Oxley , P.L.B. and Hastings , W.F. ( 1977 ). Predicting the Strain-Rate in the Zone of Intense Shear in which the Chip is Formed in Machining from the Dynamic Flow Stress Properties of the Work Material and the Cutting Conditions . Proceedings of the Royal Society of London , A356 : 395 – 410 . [CSA]
   Google Scholar
• Oxley , P.L.B. ( 1989 ). The Mechanics of Machining: An Analytical Approach to Assessing Machinability . E. Horwood , Chichester , England .
   Google Scholar
• Adibi-Sedeh , A.H. , Madhavan , V. , and Bahr , B. ( 2003 ). Extension of Oxley's Analysis of Machining to Use Different Material Models . Journal of Manufacturing Science and Engineering , 125 : 1 – 11 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Boothroyd , G. ( 1963 ). Temperatures in Orthogonal Metal Cutting . Proceedings of the Institution of Mechanical Engineers , 177 : 789 – 802 . [CSA]
   Google Scholar
• Adibi-Sedeh , A.H. , Madhavan , V. , and Bahr , B. ( 2002 ). Effect of Some Modifications to Oxley's Machining Theory . 5th CIRP International Workshop on Modeling of Machining Operations . Purdue University .
   Google Scholar
• Childs , T.H.C. , Maekawa , K. , Obikawa , T. , and Yamane , Y. ( 2000 ). Metal Machining: Theory and Applications . Arnold , London , England .
   Google Scholar
• Maekawa , K. ( 1999 ). Application of 3D Machining Modeling to Cutting Tool Design . Proceedings of the IInd CIRP international Workshop on Modeling of Machining Operations , Nantes , France , 206 – 233 .
   Google Scholar
• Marusich , T.D. and Ortiz , M. ( 1995 ). Modeling and Simulation of High Speed Machining . International Journal of Numerical Methods in Engineering , 38 ( 21 ): 3675 – 3694 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Shatla , M. , Yen , Y.C. , Castellanos , O. , Menegardo , L. , and Altan , T. ( 1999 ). Prediction of Cutting Forces, Temperatures and Stresses from Flow Stress Data and Cutting Conditions-Research in Progress . Proceedings of the IInd CIRP international Workshop on Modeling of Machining Operations , Nantes , France , 234 – 255 .
   Google Scholar
• Cerreti , E. , Fallbohmer , P. , Wu , W. , and Altan , T. ( 1996 ). Application of 2D FEM to Chip Formation in Orthogonal Metal Cutting . Journal of Material Processing Technology , 59 : 169 – 181 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Madhavan , V. and Chandrasekar , S. ( 1997 ). Some Observations on Uniqueness of Machining, in Predictable Modeling of Metal Cutting as a Means of Bridging the Gap Between Theory and Practice . Proceedings of IMECE 97, ASME MED , 6 ( 2 ): 99 – 109 . [CSA]
   Google Scholar
• Madhavan , V. , Chandrasekar , S. , and Farris , T.N. ( 2000 ). Machining as a Wedge Indentation . Journal of Applied Mechanics , 67 : 128 – 139 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Marusich , T.D. , Brand , C.J. , and Thiele , J.D. ( 2002 ). A Methodology for Simulation of Chip Breakage in Turning Processes Using an Orthogonal Finite Element Model . Proceedings of the 5th CIRP International Workshop on Modeling of Machining , 139 – 148 .
   Google Scholar
• Carroll , J.T. and Strenkowski , J.S. ( 1988 ). Finite Element Models of Orthogonal Cutting with Application to Single Point Diamond Turning . International Journal of Mechanical Sciences , 30 ( 2 ): 899 – 920 . [CSA] [CROSSREF]
   Google Scholar
• Sekhon , G.S. and Chenot , J.L. (1993). Numerical Simulation of Continuous Chip Formation During Non-steady Orthogonal Cutting. Engineering Computations , 10:31–48. [CSA]
   Google Scholar
• Wu , J.S. , Dillon , O.W. , and Lu , W.-Y. ( 1996 ). Thermo-Viscoplastic Modeling of Machining Process Using a Mixed Finite Element Method . Journal of Manufacturing Science and Engineering , 118 : 470 – 482 . [CSA]
   Web of Science ®Google Scholar
• Leopold , J. , Semmler , U. , and Hoyer , K. ( 1999 ). Applicability, Robustness and Stability of the Finite Element Analysis in Metal Cutting Operations . Proceedings of the IInd CIRP International Workshop on Modeling of Machining Operations , Nantes , France , 81 – 94 .
   Google Scholar
• Pantale , O. , Rakotomalala , R. , Touratier , M. , and Hakem , N. ( 1996 ). A Three-Dimensional Numerical Model of Orthogonal and Oblique Metal Cutting Processes . Engineering Systems Design and Analysis, PD-75, ASME , 3 : 199 – 206 . [CSA]
   Google Scholar
• Touratier , M. ( 1999 ). Computational Models of Chip Formation and Chip Flow in Machining in a Multi-Scale Approach. Present Status and Future Needs . Proceedings of the IInd CIRP International Workshop on Modeling of Machining Operations , Nantes , France , 2 – 29 .
   Google Scholar
• Bacaria , J.L. , Dalverny , O. , Pantale , O. , Rakotomalala , R. , and Caperaa , S. ( 2000 ). 2D and 3D Numerical Models of Metal Cutting with Damage Effects . European Congress on Computational Methods in Applied and Engineering , ECCOMAS 2000, Barcelona .
   Google Scholar
• Movahhedy , M.R. , Altintas , Y. , and Gadala , M.S. ( 2002 ). Numerical Analysis of Metal Cutting with Chamfered and Blunt Tools . Journal of Manufacturing Science and Engineering , 124 : 178 – 188 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Hibbit, Karlsson and Sorenson Inc. ( 2002 ). ABAQUS Theory Manual . Version 6.3. HKS, Inc. , Pawtucket , RI .
   Google Scholar
• Madhavan , V. , Olovsson , L. , Swargam , S.C. , and Agarwal , R.A. ( 1999 ). Eulerian Finite Element Analysis of 3D Machining . Invited Keynote Paper Presented at the Symposium on Computational Fluid Dynamics in Manufacturing Processes, ASME IMECE 99, Nashville, November 14–19, 1999, FED , 250 : 149 – 156 . [CSA]
   Google Scholar
• Ivester , R.W. , Kennedy , M. , Davies , M. , Stevenson , R. , Thiele , J. , Furness , R. , and Athavale , S. ( 2000 ). Assessment of Machining Models: Progress Report . CIRP Annals , Australia .
   Google Scholar
• Jaspers , S.P.F.C. ( 1999 ). Metal Cutting Mechanics and Material Behaviour . PhD thesis , Technische Universiteit Eindhoven .
   Google Scholar
• Adibi-Sedeh , A.H. and Madhavan , V. ( 2005 ). Numerical Investigation of Heat Partition in Machining Using Finite Element Analysis. Sub . ASME Journal of Heat Transfer , to be submitted . [CSA]
   Google Scholar
• Maekawa , K. , Kitagawa , T. , and Childs , T.H.C. ( 1991 ). Proc. 2nd Int. Conf. On the Behavior of Materials in Machining , 132 – 145 .
   Google Scholar
• Childs , T.H.C. and Mahdi , M.I. ( 1989 ). On the Stress Distribution Between the Chip and Tool During Metal Turning . Annals CIRP , 38 : 55 – 58 . [CSA]
   Google Scholar
• Zeibeil , F. ( 1996 ). Mechanische und thermische Belastung von Zeraspanwerkzeugen . Dusseldorf : VDI Verlag .
   Google Scholar
• Boothroyd , G. , Eagle , J.M. , and Chisholm , A.W.J. ( 1967 ). Effect of Tool Flank Wear on the Temperatures Generated During Metal Cutting . Proceedings 8th International Machine Tool Design and Research Conference , Pergamon , 667 – 680 .
   Google Scholar
• Adibi , A.H. , Vaziri , M. , Pednekar , V. , Madhavan , V. , and Ivester , R. ( 2005 ). Investigation of the Effect of Using Different Material Models on Finite Element Simulations of Metal Cutting . 8th CIRP International Workshop on Modeling of Machining Operations, in Chemnitz , Germany, 2005 .
   Google Scholar