Advanced search
Publication Cover
Machining Science and Technology
An International Journal
Volume 9, 2005 - Issue 4
Submit an article Journal homepage
156
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

INDUCTION-HEATED TOOL MACHINING OF ELASTOMERS—PART 1: FINITE DIFFERENCE THERMAL MODELING AND EXPERIMENTAL VALIDATION

Jie Luo Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan, USA
,
Hongtao Ding Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan, USA
&
Albert J. Shih Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan, USACorrespondence[email protected]
Pages 547-565 | Published online: 07 Feb 2007

REFERENCES

  • Jin , M. and Murakawa , M. ( 1998 ). High-Speed Milling of Rubber (1st Report)—Fundamental Experiments and Considerations for Improvement of Work Accuracy . Journal of the Japan Society for Precision Engineering , 64 ( 6 ): 897 – 901 .
  • Shih , A.J. , Lewis , M.A. , and Strenkowski , J.S. ( 2004a ). End Milling of Elastomers—Fixture Design and Tool Effectiveness for Material Removal . Journal of Manufacturing Science and Engineering , 126 ( 1 ): 115 – 123 . [CSA] [CROSSREF]
  • Shih , A.J. , Lewis , M. A. , Luo , J. , and Strenkowski , J.S. ( 2004b ). Chip Morphology and Forces in End Milling of Elastomers . Journal of Manufacturing Science and Engineering , 126 ( 1 ): 124 – 130 . [CSA] [CROSSREF]
  • Luo , J. and Shih , A.J. ( 2005 ). Inverse Heat Transfer Solution of the Heat Flux Due to Induction Heating . Journal of Manufacturing Science and Engineering , 127 ( 3 ): 555 – 563 . [CSA] [CROSSREF]
  • Miller , S.F. , McSpadden , S.B. , Wang , H. , Li , R. , and Shih A.J. (2007). Experimental and Numerical Analysis of the Friction Drilling Process. Journal of Manufacturing Science and Engineering , accepted. [CSA]
  • Iwashuta , T. ( 2004 ). Spot Friction Welding to Achieve Light-Weight Automobile-Body . Welding in the World , 48 : 71 – 77 . [CSA]
  • Mylrea , K.C. ( 1981 ). Introduction to Electrosurgery . Journal of Clinical Engineering , 6 ( 3 ): 185 – 191 . [CSA]
  • Bono , M. and Ni , J. ( 2002 ). A Method for Measuring the Temperature Distribution along the Cutting Edges of a Drill . Journal of Manufacturing Science and Engineering , 124 ( 4 ): 921 – 923 . [CSA] [CROSSREF]
  • Luo , J. , Ding , H. , and Shih , A.J. ( 2006 ). Induction-Heated Tool Machining of Elastomers—Part 2: Chip Morphology, Cutting Forces, and Machined Surfaces . Machining Science and Technology , 9 ( 4 ): 567 – 588 . [CSA]
  • Incropera , F.P. and Dewitt , D.P. ( 2002 ). Fundamentals of Heat and Mass Transfer , John Wiley & Sons , New York .
  • Boyer , R. , Welsch , G. , and Collings , E.W. ( 1994 ). Alpha-Beta Alloys . In Materials Properties Handbook: Titanium Alloys , ASM International , Materials Park , OH , pp. 483 – 636 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.