SERRATED CHIP PREDICTION IN FINITE ELEMENT MODELING OF THE CHIP FORMATION PROCESS

REFERENCES

• Arrazola , P.-J. ( 2003 ) Modélisation numérique de la coupe: Etude de sensibilité des paramètres d'entrée et identification du frottement entre outil-copeau , Phd. Thesis , E.C. Nantes , France .
   Google Scholar
• Barge , M. ; Hamdi , H. ; Rech , J. ; Bergheau , J.-M. ( 2005 ) Numerical modeling of orthogonal cutting: Influence of numerical parameters . Journal of Materials Processing Technology , 164 – 165 : 1148–1153 .
   Google Scholar
• Barry , J. ; Byrne , G. ; ( 2002 ). Chip formation, acoustic emission and surface white layers in hard machining . Annals of the CIRP , 51 ( 1 ): 65 – 68 .
   Web of Science ®Google Scholar
• Batra , R.C. ; Ko , K.-I. ; ( 1992 ). An adaptative mesh refinement technique for the analysis of shear bands in plane strain compression of a thermoviscoplastic solid . Computational Mechanics , 10 : 369 – 379 .
   Google Scholar
• Belistchko , T. ; Liu , W.K. ; Moran , B. ( 1996 ) Nonlinear Finite Elements for Continua and Structures , John Wiley & Sons , New York .
   Google Scholar
• Brookes , K. J.A. ( 1996 ) World Directory and Handbook of Hard Metals and Hard Materials, , 6th edition , International Carbide Data , East Barnet .
   Google Scholar
• Chu , C.C. ; Needleman , A. 1980 Void nucleation effects in biaxially stretched sheets . Journal of Engineering Materials:Technology , 102 : 249 – 256 .
   Web of Science ®Google Scholar
• Davies , M.A. ; Burns , T.J. ; Evans , C.J. ; ( 1997 ). Modeling of thermomecnaical instability in machining . International Journal of Mechanical Sciences , 39 ( 11 ): 1273 – 1314 .
   Web of Science ®Google Scholar
• Davies , M.A. ; Cooke , L.A. ; Larsen , E.R. ( 2005 ). High bandwidth thermal microscopy of machining AISI 1045 steel . Annals of the CIRP , 54 ( 1 ): 63 – 66 .
   Web of Science ®Google Scholar
• Fang , N. ; Jawahir , I.S. ( 2002 ). An analytical model and experimental validation for machining with grooved tools incorporating the effects of strains, strain-rates and temperatures . CIRP Annals-Manufacturing Technology , 51 ( 1 ): 83 – 86 .
   Web of Science ®Google Scholar
• Guo , Y.B. ( 2002 ). Mechanical behavior characterization of the secondary shear zone in metal cutting . Transactions of NAMRI/SME , 30 : 423 – 430 .
   Google Scholar
• Guo , Y.B. ; Liu , C.R. ( 2002 ). FEM analysis of mechanical state on sequentially machined surfaces . Material Science and Technology , 6 ( 1 ): 21 – 41 .
   Web of Science ®Google Scholar
• Guo , Y.B. ; Liu , C.R. (2002b). 3D FEA modeling of hard turning. Journal of Manufacturing Science and Engineering , 124: 189–199.
   Web of Science ®Google Scholar
• Guo , Y.B. ; Yen , D.-W. ( 2004 ) A FEM study on mechanisms of discontinuous chip formation in hard machining . Journal of Materials Processing Technology , 155 – 156 : 1350–1356 .
   Google Scholar
• Guo , Y.B. : Wen , Q. : ( 2005 ). A hybrid modelling approach to investigate chip morphology transition with the stagnation effect by cutting edge geometry . Transactions of NAMRI/SME , 33 : 469 – 476 .
   Google Scholar
• Gurson , A.L. ( 1977 ) Continuum theory of ductile rupture by void nucleation:growth: Part I—yield criteria and flow rules for porous ductile media . Transactions of ASME , January : 2 – 14 .
   Google Scholar
• Hao , S. ; Brocks , W. : ( 1997 ). The Gurson–Tvergaard–Needleman model for rate and temperature-dependent materials with isotropic and kinematic hardening . Computational Mechanics , 20 : 34 – 40 .
   Google Scholar
• HKS ABAQUS Theory manual (ver. 6.4) , ( 2002 ) Hibbitt , Karlsson and Sorensen Inc. , Pawtucket , USA .
   Google Scholar
• Johnson , W.K. ; Cook , R. ( 1983 ) A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures . Proceedings of the 7th International Symposium on Ballistics , Hague , The Netherlands , 541 – 547 .
   Google Scholar
• Klocke , F. ; Raedt , H.-W. ; Hoppe , S. : ( 2001 ). 2D-FEM simulation of the orthogonal high speed cutting process . Material Science and Technology , 5 ( 3 ): 323 – 340 .
   Web of Science ®Google Scholar
• Komanduri , R. ; Schroeder , T. ; Hazra , J. ; Von Turkovich , B.F. ; Flom , D.G. ( 1982 ). On the catastrophic shear instability in high speed machining of a 4340 steel . J. Eng. for Industry , 104 : 121 – 131 .
   Google Scholar
• Kudo , H. ( 1965 ). Some new slip-line solutions for two-dimensional steady-state machining . International Journal of Mechanical Sciences , 7 : 43 – 45 .
   Google Scholar
• Lee E.H. ; Shaffer B.W. ( 1951 ). The theory of plasticity applied to a problem of machining . ASME Jour. App. Mech. , 73 : 404 – 413 .
   Google Scholar
• Leopold , J. ; Schmidt , G. ( 1999 ) Challenge and problems with hybrid systems for the modeling of machining operations . Proceedings of the 2nd CIRP International Workshop on Modelling of Mechining Operations , Nantes , France , 298 – 311 .
   Google Scholar
• Madhavan , V. ; Gandikota , V.A. ; Agarwal , R. ( 2000 ). Nonlinear finite element analysis of machining and sheet metal forming . American Institute of Aeronautics and Astronautics Journal , 38 : 2176 – 2186 .
   Google Scholar
• Marusich , T.D. ; Ortiz , M. ( 1995 ). Modeling and simulation of high-speed machining . International Journal for Numerical Methods in Engineering , 38 : 3675 – 3694 .
   Web of Science ®Google Scholar
• Merchant , E. ( 1944 ) Basic mechanics of the metal-cutting process . Journal of Applied Mechanics , 11 : A168 – A175 .
   Google Scholar
• Metals Handbook, Vol. 1, Properties:Selection: Irons, Steels, and HighPerformance Alloys , ( 1980 ), American Society for Metals International .
   Google Scholar
• Metals Handbook, Vol. 3, Properties:Selection: Stainless Steels, Tool Materials and Special-Purpose Metals , ( 1980 ) American Society for Metals International .
   Google Scholar
• Molinari , A. ; Musquar , C. ; Sutter , G. ( 2002 ). Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modelling . International Journal of Plasticity , 18 ( 4 ): 443 – 459 .
   Web of Science ®Google Scholar
• Ng , E. ; El-Wardany , T.I. ; Dumitrescu , M. ; Elbestawi , M.A. ( 2002 ) Physics Based Simulation of High Speed Machining . Proceedings of the 5th CIRP International Workshop on Modeling of Machining Operations , West Lafayette , IN , USA , 1 – 19 .
   Google Scholar
• Oxley , P.L.B. ( 1989 ). The Mechanics of Machining: An Analytical Approach to Assessing Machinability . Ellis Horwood Limited .
   Google Scholar
• Özel , T. ; Zeren , E. ( 2006 ) Finite element analysis of the influence of edge roundness on the stress and temperature fields induced by high speed machining . International Journal of Advanced Manufacturing Technology , DOI 10.1007/s00170-006-0720-2 .
   Google Scholar
• Pantale , O. ; Rakotomalala , R. ; Touratier , M. ; Hakem , N. ( 1996 ). A three- dimensional numerical model of orthogonal and oblique metal cutting processes . Engineering Systems Design and Analysis, ASME-PD , 75 : 199 – 205 .
   Google Scholar
• Pomey , J. ( 1970 ) État actuel des connaissances fondamentales sur la coupe des métaux, bulletin cercle d'etudes des métaux . Journées d'information de la coupe des métaux , November , 8 – 36 .
   Google Scholar
• Poulachon , G. ; Moisan , A. ( 1998 ). A contribution to the study of cutting mechanisms during high speed machining of hardened steel . Annals of the CIRP , 47 ( 1 ): 71 – 76 .
   Google Scholar
• Recht , R.F. ( 1964 ). Catastrophic thermoplastic shear . Journal of Applied Mechanics , 86 : 189 – 193 .
   Google Scholar
• Shaw , M.C. ( 1980 ). A new mechanism of plastic flow . International Journal of Mechanical Science , 22 : 673 – 686 .
   Google Scholar
• Shi , J. ; Liu , C.R. ( 2006 ). On predicting chip morphology and phase transformation in hard machining . International Journal Advanced Technology , 27 : 645 – 654 .
   Web of Science ®Google Scholar
• Söhner Jörg ; Weule Hartmut ; Biessinger Frank ; Schulze Volker ; Vöhringer Otmar . (2001) Examinations and 3D-Simulations of HSC face milling process. Proceedings of the 4th CIRP International Workshop Modelling of Machining Operations, Delft , The Netherlands, 111–115.
   Google Scholar
• Trent , E.M. ( 1991 ) Metal Cutting , Butterworth-Heinemann , London .
   Google Scholar
• Tvergaard , V. ( 1981 ). Influence of voids on shear band instabilities . International Journal of Fracture , 17 ( 4 ): 389 – 407 .
   Web of Science ®Google Scholar
• Warnecke , G. ; Oh , J.-D. ( 2002 ). A new thermo-viscoplastic material model for finite-element-analysis of the chip formation process . Annals of the CIRP , 51 ( 1 ): 79 – 82 .
   Web of Science ®Google Scholar
• Wen , Q. : Guo , Y.-B. : Todd , B.-A. : ( 2006 ). An adaptive fea method to predict surface quality in hard machining . Journal of Materials Processing Technology , 173 : 21 – 28 .
   Google Scholar
• Wright , P.K. ; Robinson , J.L. ( 1977 ) Material behaviour in deformation zones of machining operation . Metals Technology , May : 240 – 248 .
   Google Scholar
• Yen , Y.-C. ; Jain , P. ; Chigurupati , P. ( 2004 ) Computer simulation of orthogonal cutting using a toll with multiple coatings . Material Science and Technology , 8 ( 2 ).
   Web of Science ®Google Scholar
• Yen , Y.-C. ; Söhner , J. ; Weule , H. ( 2002 ) Carbide tool in orthogonal cutting using fem simulation . Material Science and Technology , 6 ( 3 ).
   Web of Science ®Google Scholar