REFERENCES
- Batra , R.C. ( 1987 ). Effect of material parameters on the initiation and growth of adiabatic shear bands . Inter. J. of Solids Structures , 23 : 1435 – 1446 .
- Becze , C.E. ; Elbestawi , M.A. ( 2002 ). A chip formation based analytic force model for oblique cutting . Inter. J. of Machine Tools and Manufacture , 42 : 529 – 538 .
- Chou , Y.K. ; Evans , C.J. ( 1999 ). White layers and thermal modeling of hard turned surfaces . Inter. J. of Machine Tools and Manufacture , 39 : 1863 – 1881 .
- Davies , M.A. ; Burns , T.J. ; Evans , C.J. ( 1997 ). On the dynamics of chip formation in machining hard metals . Annals of the CIRP , 45 : 25 – 30 .
- Davies , M.A. ; Chou , Y. ; Evans , C.J. ( 1996 ). On chip morphology, tool wear and cutting mechanics in finish hard turning . Annals of the CIRP , 45 : 77 – 82 .
- Ekinovic , S. ; Dolinsek , S. ; Jawahir , I.S. ( 2004 ). Some observations of the chip formation process and the white layer formation in high speed milling of hardened steel . J. of Machining Science and Technology , 8 : 327 – 340 .
- Elbestawi , M.A. ; Srivastava , A.K. ; El-Wardany , T.I. ( 1996 ). A model for chip formation during machining of hardened steel . Annals of the CIRP , 45 : 71 – 76 .
- Hua , J. ; Shivpuri , R. ( 2004 ). Prediction of chip morphology and segmentation during the machining of titanium alloys . J. of Materials Processing Technology , 150 : 124 – 133 .
- Huang , Y. ( 2002 ) Predictive Modeling of Tool Wear Rate with Application to CBN Hard Turning . Ph.D. Thesis , Georgia Institute of Technology , Atlanta , GA .
- Huang , Y. ; Liang , S.Y. ( 2003 ). Force modeling in shallow cuts with large negative rake angle and large nose radius tools–application to hard turning . Int. J. of Advanced Manufacturing Technology , 22 : 626 – 632 .
- Huang , Y. ; Liang , S.Y. ( 2004 ). Modeling of CBN tool flank wear progression in finish hard turning . ASME J. of Manufacturing Science and Engineering , 126 : 98 – 106 .
- Huang , Y. ; Liang , S.Y. ( 2005 ). Modeling of cutting forces under hard turning conditions considering tool wear effect . ASME J. of Manufacturing Science and Engineering , 127 : 262 – 270 .
- Komanduri , R. ; Brown , R.H. ( 1981 ). On the mechanics of chip segmentation in machining . J. of Engineering for Industry, Trans. ASME , 103 : 33 – 51 .
- König , W. ; Berktold , A. ; Koch , K.F. ( 1993 ). Turning vs. grinding-A comparison of surface integrity aspects and attainable accuracies . Annals of the CIRP , 42 : 39 – 43 .
- Molinari , A. (1997). Collective behavior and spacing of adiabatic shear bands. J. of Mech. Phys. Solids , 45: 1551–1575.
- Molinari , A. ; Musquar , C. ; Sutter , G. ; ( 2002 ). Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling . Inter. J. of Plasticity , 18 : 443 – 459 .
- Nakayama , K. ; Arai , M. ; Kanda , T. ( 1988 ). Machining characteristics of hard materials . Annals of the CIRP , 37 : 89 – 92 .
- Poulachon , G. ; Moisan , A.L. ( 2000 ). Hard turning: chip formation mechanisms and metallurgical aspects . Trans. of the ASME , 122 : 406 – 412 .
- Poulachon , G. ; Moisan , A. ; Jawahir , I.S. ( 2001 ). Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools . Wear , 250 : 576 – 586 .
- Ren , X.J. ; James , R.D. ; Brookes , E.J. ; Wang , L. ( 2001 ) Machining of high chromium hardfacing materials J. of Materials Processing Technology , 115 : 423 – 429 .
- Shaw , M.C. ; Vyas , A. ( 1993 ). Chip formation in the machining of hardened steel . Annals of the CIRP , 42 : 29 – 33 .
- Sheikh-Ahmad , J.Y. ; Quarless , V. ; Bailey , J.A. ( 2004 ). On the role of microcracks on flow instability in low speed machining of CP titanium . Machining Science and Technology , 8 : 415 – 430 .
- Shih , A.J. ; Luo , J. ; Lewis , M. ; Strenkowski , J.S. ( 2004 ). Chip morphology and forces in end milling of elastomers . Trans. of the ASME , 126 : 124 – 130 .
- Tönshoff , H.K. ; Arendt , C. ; Amor , B. ( 2000 ). Cutting of hardened steel . Annals of the CIRP , 49 : 547 – 566 .
- Ueda , N. ; Matsuo , T. ( 1982 ). An analysis of saw-toothed chip formation . Annals of the CIRP , 31 : 81 – 84 .
- Vyas , A. ; Shaw , M.C. ( 1999 ) Mechanics of saw-tooth chip formation in metal cutting J. of Manufacturing Science:Engineering , 121 : 163 – 172 .
- Wright , T.W. ; Ockendon , H. ( 1996 ). Research note: A scaling law for the effect of inertia of the formation of adiabatic shear bands . Inter. J. of Plasticity , 12 : 927 – 934 .