3D FINITE ELEMENT MODELLING OF CHIP FORMATION PROCESS FOR MACHINING INCONEL 718: COMPARISON OF FE SOFTWARE PREDICTIONS

REFERENCES

• Ahmed , N. ; Mitrofanov , A.V. ; Babitsky , V.I. ; Silberschmidt , V.V. ( 2006 ) Analysis of material response to ultrasonic vibration loading in turning Inconel 718 . Materials Science and Engineering A , 424 : 318 – 325 .
   Web of Science ®Google Scholar
• Arrazola , P.J. ; Pujana , J. ; Llanos , I. , Villar , A. , Ugarte , D. , Aguirre , A. , Gallego , I. , Le Maître F. (2006) Finite element modeling of oblique cutting. Proceedings of the 9th CIRP International Workshop on Modelling Machining Operations , pp. 101–112.
   Google Scholar
• Arrazola , P.J. ; Llanos , I. ; Villar , J.A. ; Ugarte , D. ; Marya , S. ( 2007 ) 3D Finite Element Modelling of Chip Formation Process, In Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations, Regio-Calabria, Italia.
   Google Scholar
• Arrazola , P.J. ; Meslin , F. ; Marya , S. ( 2003 ) Sensitivity study in numerical cutting modelling , In Procedings of the 7th CIRP International Workshop on Modelling Machining Operations , pp. 83 – 90 .
   Google Scholar
• Arrazola , P.J. ; Özel , T. ( 2008 ) Numerical modelling of 3-D hard turning using Arbitrary Eulerian Lagrangian finite element method . International Journal of Machining and Machinability of Materials , 3 ( 3 ): 238 – 249 .
   Google Scholar
• Arunachalam , R.M. ; Mannan , M.A. ; Spowage , A.C. ( 2004b ) Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools . International Journal of Machine Tools and Manufacture , 44 : 879 – 887 .
   Web of Science ®Google Scholar
• Arunachalam , R.M. Mannan , M.A. ; Spowage , A.C. ( 2004a ) Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools . International Journal of Machine Tools and Manufacture , 44 : 1481 – 1491 .
   Web of Science ®Google Scholar
• Boothroyd , G. ( 1963 ) Temperatures in orthogonal metal cutting . Proc. Inst. Mech. Eng ., 177 : 789 – 810 .
   Google Scholar
• Calamaz , M. ; Coupard , D. ; Girot , F. ( 2008 ) A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4 V . International Journal of Machine Tools & Manufacture , 48 , 275 – 288 .
   Web of Science ®Google Scholar
• Ceretti , E. ; Lazzaroni , C. ; Menegardo , L. ; Altan , T. ( 2000 ) Turning simulations using a three-dimensional FEM code . Journal of Materials Processing Technology , 98 : 99 – 103 .
   Web of Science ®Google Scholar
• DeMange , J.J. ; Pereira , J.M. ; Lerch , B.A. ; Prakash , V. ( 2000 ) Ballistic impact behavior of Ni-based super alloys with applications to engine fan blade containment . In Proceedings of the SEM IX International Congress on Experimental Mechanics , Orlando , FL , June 5–8, pp. 344 – 347 .
   Google Scholar
• DeMange , J.J. ; Prakash , V. ; Pereira , J.M. ( 2009 ) Effects of material microstructure on blunt projectile penetration of a nickel-based super alloy . International Journal of Impact Engineering , 36 : 1027 – 1043 .
   Web of Science ®Google Scholar
• Ezugwu , E.O. ( 2005 ) Key Improvements in the machining of difficult-to-cut aerospace superalloys . International Journal of Machine Tools & Manufacture , 45 : 1353 – 1367 .
   Web of Science ®Google Scholar
• Guo , Y.B. ; Liu , C.R. ( 2002 ) 3D FEA modeling of hard turning . ASME Journal of Manufacturing Science and Engineering , 124 : 189 – 199 .
   Web of Science ®Google Scholar
• Haglund , A. ; Kishawy , H.A. ; Rogers , R.J. ( 2008 ) An exploration of friction models for the chip tool interface using an arbitrary Lagrangian-Eulerian finite element model . Wear , 265 ( 3–4 ): 452 – 460 .
   Web of Science ®Google Scholar
• Johnson , G.R. ; Cook , W.H. ( 1983 ) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures . Proceedings of 7^th International Symposium on Ballistics , pp. 541 – 547 .
   Google Scholar
• Karpat , Y. ; Özel , T. ( 2006 ) Predictive analytical and thermal modeling of orthogonal cutting process. Part I: Predictions of tool forces, stresses and temperature distributions . ASME Journal of Manufacturing Science and Engineering , 128 : 435 – 444 .
   Web of Science ®Google Scholar
• Komanduri , R. ; Hou , Z.B. ( 2001 ) Thermal modeling of the metal cutting process, Part 1: temperature rise distribution due to shear plane heat source . International Journal of Mechanical Sciences , 42 : 1715 – 1752 .
   Web of Science ®Google Scholar
• Lee , E.H. ; Shaffer , B.W. ( 1951 ) The theory of plasticity applied to a problem of machining . Transactions of the ASME, Journal of Applied Mechanics , 18 : 405 – 413 .
   Web of Science ®Google Scholar
• Leowen , E.G. ; Shaw , M.C. ( 1964 ) On the analysis of cutting tool temperatures . Transactions of ASME , 71 : 217 – 231 .
   Google Scholar
• Llanos , I. ; Villar , J.A. ; Urresti , I. ; Arrazola , P.J. ( 2009 ) Finite element modeling of oblique machining using an arbitrary Lagrangian–Eulerian formulation . Machining Science and Technology: An International Journal , 13 ( 3 ): 385 – 406 .
   Web of Science ®Google Scholar
• Lorentzon , J. ; Järvstråt , N. ; Josefson , B.L. ( 2009 ) Modelling of chip formation of alloy 718 . Journal of Materials Processing Technology , 209 : 4645 – 4653 .
   Web of Science ®Google Scholar
• Madhavan , V. ; Adibi-Sedeh , A.H. (2005) Understanding of finite element analysis results under the framework of Oxley's machining model. Machining Science and Technology: An International Journal , 9(3): 345–368.
   Web of Science ®Google Scholar
• Marusich , T.D. ; Ortiz , M. ( 1995 ) Modeling and simulation of high-speed machining . International Journal for Numerical Methods in Engineering , 38 : 3675 – 3694 .
   Web of Science ®Google Scholar
• Merchant , M.E. ( 1945 ) Mechanics of the metal cutting process . Journal of Applied Physics , 16 : 318 – 324 .
   Web of Science ®Google Scholar
• Mitrofanov , A.V. ; Babitsky , V.I. ; Silberschmidt , V.V. ( 2003 ) Finite element simulations of ultrasonically assisted turning, Computational Materials Science, Volume 28, Issues 3–4, November 2003, pp. 645–653 .
   Google Scholar
• Mitrofanov , A.V. ; Babitsky , V.I. ; Silberschmidt , V.V. ( 2004 ) Finite element analysis of ultrasonically assisted turning of Inconel 718 . Journal of Materials Processing Technology , 153–154 : 233 – 239 .
   Web of Science ®Google Scholar
• Mitrofanov , A.V. ; Babitsky , V.I. ; Silberschmidt , V.V. ( 2005 ) Thermomechanical finite element simulations of ultrasonically assisted turning . Computational Materials Science , 32 ( 3–4 ): 463 – 471 .
   Web of Science ®Google Scholar
• Molinari , A. ; Moufky , A. ( 2005 ) A new thermomechanical model of cutting applied to turning operations. Part I. Theory . International Journal of Machine Tools and Manufacture , 45 : 166 – 180 .
   Web of Science ®Google Scholar
• Nasr , M.N.A. ; Ng , E.-G. ; Elbestawi , M.A. ( 2008 ) A modified time-efficient FE approach for predicting machining-induced residual stresses . Finite Elements in Analysis and Design , 44 ( 4 ): 149 – 161 .
   Web of Science ®Google Scholar
• Olschewski , J. ; Hamann , A. ; et al. . ( 2001 ) Werkstoffmechanik einer Nickelbasislegierung beim Hochgeschwindigkeitsspanen-Werkstoffverhalten und Modellierung, Teil II, Report BAM-V.2 01/3. Bundesanstalt für Materialforschung und prüfung (BAM), Berlin.
   Google Scholar
• Outeiro , J.C. ; Pina , J.C. ; M'Saoubi , R. ; Pusavec , F. ; Jawahir , I.S. ( 2008 ) Analysis of residual stresses induced by dry turning of difficult-to-machine materials . CIRP Annals - Manufacturing Technology , 57 ( 1 ): 77 – 80 .
   Web of Science ®Google Scholar
• Oxley , P.L.B. ( 1962 ) An analysis for orthogonal cutting with restricted tool-chip contact . International Journal of Mechanical Sciences , 4 : 129 – 125 .
   Google Scholar
• Özel , T. ( 2009a ) Computational modelling of 3-D turning with variable edge design tooling: influence of micro-geometry on forces, stresses, friction and tool wear . Journal of Materials Processing Technology , 209 ( 11 ): 5167 – 5177 .
   Web of Science ®Google Scholar
• Özel , T. ( 2009b ) Experimental and finite element investigations on the influence of tool edge radius in machining nickel-based alloy. CD Proceedings of 2009 ASME International Conference on Manufacturing Science and Engineering, Paper No. 84362, October 5–7 (2009). Lafayette, Indiana, USA.
   Google Scholar
• Özel , T.; Zeren E. ( 2007 ) Finite element modeling of stresses induced by high speed machining with round edge cutting tools . International Journal of Advanced Manufacturing Technology , 35 ( 3–4 ): 255 – 267 .
   Web of Science ®Google Scholar
• Pantalé , O. ; Rakotomalala , R. ; Touratier , M. ( 1998 ) An A.L.E. three-dimensional model of orthogonal and oblique metal cutting processes . International Journal of Forming Processes , 1 ( 3 ): 371 – 389 .
   Google Scholar
• Pawade , R.S. ; Joshi , S.S. ; Brahmankar , P.K. ( 2008 ) Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718 . International Journal of Machine Tools & Manufacture , 48 : 15 – 28 .
   Web of Science ®Google Scholar
• Pereira , J.M. ; Lerch , B.A. ( 2001 ) Effects of heat treatment on the ballistic impact properties of Inconel 718 for jet engine fan containment applications . International Journal of Impact Engineering , 25 : 715 – 733 .
   Web of Science ®Google Scholar
• Pusavec , F. ; Deshpande , A. ; M'Saoubi , R. ; Kopac , J. ; Dillon , O.W. ; Jawahir , I.S. ( 2008 ) Predictive Performance Models and Optimization for Sustainable Machining of a High Temperature Nickel Alloy, Proceedings of High Performance Cutting, Dublin, pp. 335_345.
   Google Scholar
• Rahman , M. ; Seah , W.K.H. ; Teo , T.T. ( 1997 ) The machinability of Inconel 718 . Journal of Materials Processing Technology , 63 : 199 – 204 .
   Web of Science ®Google Scholar
• Ranganath , S. ; Guo , C. ; Hegde , P.A. ( 2009 ) Finite element modeling approach to predicting white layer formation in nickel superalloys . CIRP Annals – Manufacturing Technology 58 : 77 – 80 .
   Web of Science ®Google Scholar
• Sekhon , G.S. ; Chenot , J.L. ( 1992 ) Some simulation experiments in orthogonal cutting . Numerical Methods in Industrial Forming Processes , Rotterdam, The Netherlands: A.A. Balkema, pp. 901 – 906 .
   Google Scholar
• Sharman , A.R.C. ; Hughes , J.J. ; Ridgway , K. ( 2004 ) Workpiece surface integrity and tool life issues when turning Inconel 718 nickel based superalloy . Machining Science and Technology , 8 ( 3 ): 399 – 414 .
   Web of Science ®Google Scholar
• Sievert , R. ; Noack , H.D. ; Hamann , A. ; Loewe , P. ; Singh , K.N. ; Kuenecke , G. ; Clos , R. ; Schreppel , U. ; Veit , P. ; Uhlmann , E. ; Zettier , R. (2003) Simulation der Spansegmentierung beim Hochgeschwindigkeits-Zerspanned unter Berücksichtigung duktiler Schädigung. Techniche Mechanik, Band 23, Heft 2–4, pp. 216–233.
   Google Scholar
• Soo , S.L. ; Aspinwall , D.K. ; Dewes , R.C. ( 2004 ) Three-Dimensional Finite Element Modelling of High-Speed Milling of Inconel 718 . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , 218 : 1555 – 1561 .
   Web of Science ®Google Scholar
• Tancret , F. ; Sourmail , T. ; Yescas , M.A. ; Evans , R.W. ; McAleese , C. ; Singh , L. ; Smeeton , T. ; Bhadeshia , H.K.D.H. ( 2003 ) Design of a creep resistant nickel base superalloy for power plant applications Part 3–Experimental results . Materials Science and Technology , 19 : 296 – 303 .
   Web of Science ®Google Scholar
• Tay , A.O. ; Stevenson , M.G. ; Davis , G.D.V. ; Oxley , P.L.B. ( 1976 ) A numerical method for calculating temperature distributions in machining from force and shear angle measurements . International Journal of Machine Tool Design and Research , 16 : 335 – 349 .
   Google Scholar
• Trigger , K.J. ; Chao , B.T. ( 1951 ) An analytical evaluation of metal cutting temperatures . Transactions of ASME , 73 : 57 – 68 .
   Google Scholar
• Uhlmann , E. ; Graf von der Schulenburg , M. ; Zettier , R. ( 2007 ) Finite element modeling and cutting simulation of Inconel 718 . Annals of the CIRP , 56 ( 1 ): 61 – 64 .
   Web of Science ®Google Scholar
• Warnecke , G. ; Oh , J.D. ( 2002 ) A new thermo-viscoplastic material model for finite-element-analysis of the chip formation process . Annals of the CIRP , 51 ( 1 ): 79 – 82 .
   Web of Science ®Google Scholar
• Zhang , B. ; Mynors , D.J. ; Mugarra , A. ; Ostolaza , K. ( 2004 ) Representing the superplasticity of Inconel 718 . Journal of Materials Processing Technology , 153–154 : 694 – 698 .
   Web of Science ®Google Scholar
• Zhang , J.M. ; Gao , Z.Y. ; Zhuang , J.Y. ; Zhong , Z.Y. ; Janschek , P. ( 1997 ) Strain-rate hardening behavior of superalloy IN718 . Journal of Materials Processing Technology , 70 : 252 – 257 .
   Web of Science ®Google Scholar
• Zorev , N.N. ( 1966 ) Metal Cutting Mechanics , Oxford : Pergamon Press .
   Google Scholar