REFERENCES
- Arunachalam , R.M. ; Mannan , M.A. ( 2003 ) High speed facing of age hardened Inconel 718 using silicon carbide whisker reinforced ceramic tools . Transactions of NAMRAI/SME , 30 : 345 – 352 .
- Arunachalam , R.M. ; Mannan , M.A. ; Spowage , A.C. ( 2004 ) Surface integrity when machining age hardened Inconel 718 with coated carbide tools . International Journal of Machine Tools and Manufacture , 44 ( 14 ): 1481 – 1491 .
- Belhadi , S. ; Mabrouki , T. ; Rigal , J.-F. ; Boulanouar , L. ( 2005 ) Experimental and numerical study of chip formation during straight turning of hardened AISI 4340 steel . Journal of Engineering Manufacture, Proc. I MechE , 219 ( B ): 515 – 524 .
- Conaway , H.R. ( 1975 ) Machining the high-nickel alloys . In: Influence of Metallurgy on Machinability . Tipnis , A.V. , Ed. American Society for Metals, 7: 247–256 .
- Costes , J.P. ; Guillet , Y. ; Poulachan , G. ; Dessoly , M. ( 2007 ) Tool-life and wear mechanisms of CBN tools in machining of Inconel 718 . International Journal of Machine Tools and Manufacture , 47 ( 7–8 ): 1081 – 1087 .
- Devillez , A. ; Schneider , F. ; Dominiak , S. ; Dudzinski , D. ; Larrouquere , D. ( 2007 ) Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools . Wear , 262 : 931 – 942 .
- Duan , C.Z. ; Wang , M.J. (2005) Characteristics of adiabatic shear bands in the orthogonal cutting of 30CrNi3MoV steel. Journal of Materials Processing Technology , 168: 102–106.
- Ezugwu , E.O. ; Bonney , J. ; Yamane , Y. ( 2003 ) An overview of the machinability of aeroengine alloy . Journal of Materials Processing Technology , 135 : 233 – 253 .
- Ezugwu , E.O. ; Tang , S.H. ( 1995 ) Surface abuse when machining cast iron (G-17) and nickel-base superalloy (Inconel 718) with ceramic tools . Journal of Materials Processing Technology , 55 : 63 – 69 .
- Flom , D.G. ; Komanduri , R. ; Lee , M. ( 1984 ) High-speed machining of metals . Annual Review of Material Science , 14 : 231 – 278 .
- Hou , Z.B. ; Komanduri , R. ( 1997 ) Modeling of thermo mechanical shear instability in machining . International Journal of Mechanical Sciences , 11 : 1273 – 1314 .
- Jawahir , I.S. ; Van Luttervelt , C.A. ( 1993 ) Recent developments in chip control research and applications . Annals of the CIRP , 42 ( 2 ): 659 – 693 .
- Komanduri , R. ; Schroeder , T.A. ( 1986 ) On shear instability in machining a nickel iron base superalloy . Transactions of the ASME, Journal of Engineering for Industry , 108 : 93 – 100 .
- Lorentzon , J. ; Jarvstrat , N. ; Josefson , B.L. ( 2008 ) Modelling chip formation of alloy 718 . Journal of Materials Processing Technology , 209 ( 10 ): 4645 – 4653 .
- Pawade , R.S. ( 2008 ) Material Deformation Characteristics and Machined Surface Integrity in High-speed Turning of Inconel 718. PhD Thesis, Indian Institute of Technology, Powai, Mumbai.
- Pawade , R.S. ; Joshi , S.S. ; Brahmankar , P.K. ( 2008 ) Effect of cutting edge geometry and machining parameters on surface integrity of high-speed turned Inconel 718 . International Journal of Machine Tools and Manufacture , 48 ( 1 ): 15 – 28 .
- Pawade , R.S. ; Joshi , S.S. ; Brahmankar , P.K. ; Rahman , M. ( 2007 ) An investigation of cutting forces and surface damage in high-speed turning of Inconel 718 . Journal of Materials Processing Technology , 192–193 : 139 – 146 .
- Pawade , R.S. ; Sonawane , H. ; Joshi , S.S. ( 2009 ) An analytical modeling to predict specific shear energy in high-speed turning of Inconel 718 . International Journal of Machine Tools and Manufacture , 49 ( 12–13 ): 979 – 990 .
- Phadke , M.S. ( 1989 ) Quality Engineering using Robust Design , Prentice Hall Publication , Englewood Cliffs , New Jersey ; pp. 30 – 112 .
- Sandvik Corporation ( 2005 ) New Tools from Sandvik Coromant , Sandvik Catalogue , Sweden , pp. A37 – A39 .
- Shaw , M.C. ( 1997 ) Metal Cutting Principles , Clarendon Press , Oxford , p. 434 .
- Soo , S.L. Aspinwall , D.K. ; Dewes , R.C. ( 2004 ) 3D FE modeling of the cutting of Inconel 718 . Journal of Materials Processing Technology , 150 ( 1–2 ): 116 – 123 .
- Toenshoff , H.K. ; Winkleri , H. ; Patzke , M. ( 2000 ) Chip formation at high cutting speed machining . In Proceedings of the Winter Annual Meeting of ASME , New Orleans , Louisiana , pp. 95 – 100 .
- Wayne , S.F. ; Buljan , S.T. ( 1990 ) Wear of ceramic cutting tools in Ni-based superalloy machining . Tribology Transactions , 33 ( 4 ): 618 – 626 .
- Westbrook , J.H. ; Bellows , G. ; Field , M. ; Kahles , F. ( 1972 ) Machining the superalloys . In: Simms , C.T. ; Hagel , W.C. (Eds.), The Superalloys , John Wiley , New York .
- Wu , Q. ; Fang , N. ( 2006 ) Effect and modeling of tool-edge wear in high-speed finish machining of superalloy Inconel 718 . Transactions of NAMRAI/SME , 34 : 397 – 404 .
- Present address for R. S. Pawade is Dr. Babasaheb Ambedkar Technological University, Lonere, Raigad 402 103 India.